47 lines
1.2 KiB
Plaintext
47 lines
1.2 KiB
Plaintext
MangoPi MQ1RDW2
|
|
===============
|
|
|
|
MangoPi MQ1RDW2 is a tiny ARM Cortex-A7 based single board computer.
|
|
It's built around Allwinner T113-S3 dual core 1GHz CPU with integrated
|
|
128MB DDR3-1600 RAM.
|
|
Board features:
|
|
- USB-OTG Type-C socket
|
|
- USB-HOST Type-C socket
|
|
- 2x 18 pin GPIO headers
|
|
- TF card slot
|
|
- RTL8723DS WiFi module with ext. antenna connector
|
|
- 40 pin RGB FPC connector
|
|
- 6 pin CTP FPC connector
|
|
- 24 pin DVP FPC connector
|
|
- onboard mic
|
|
- onboard audio amplifier
|
|
- FEL,reset button
|
|
|
|
How to build
|
|
============
|
|
|
|
$ make mangopi_mq1rdw2_defconfig
|
|
$ make
|
|
|
|
Wifi
|
|
==========
|
|
|
|
Edit board/mangopi/mq1rdw2/overlay/etc/wpa_supplicant.conf or
|
|
/etc/wpa_supplicant.conf once connected to the board:
|
|
|
|
* Replace YOURSSID with your AP ssid
|
|
* Replace YOURPASSWD with your AP password
|
|
|
|
How to write the SD card
|
|
========================
|
|
|
|
Once the build process is finished you will have an image called "sdcard.img"
|
|
in the output/images/ directory.
|
|
|
|
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
|
|
|
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
|
|
|
Connect a TTL UART to the UART3 on P8 header (unpopulated), insert the microSD card and
|
|
plug in a USB-C cable to the OTG or HOST connector to boot the system.
|