64 lines
1.4 KiB
Plaintext
64 lines
1.4 KiB
Plaintext
Intro
|
|
=====
|
|
|
|
Andestech AE350 Platform
|
|
|
|
The AE350 prototype demonstrates the AE350 platform on the FPGA.
|
|
|
|
How to build it
|
|
===============
|
|
|
|
Configure Buildroot
|
|
-------------------
|
|
|
|
$ make andes_ae350_45_defconfig
|
|
|
|
If you want to customize your configuration:
|
|
|
|
$ make menuconfig
|
|
|
|
Build everything
|
|
----------------
|
|
Note: you will need to access to the network, since Buildroot will
|
|
download the packages' sources.
|
|
|
|
$ make
|
|
|
|
Result of the build
|
|
-------------------
|
|
|
|
After building, you should obtain the following files:
|
|
|
|
output/images/
|
|
|-- ae350_ax45mp.dtb
|
|
|-- boot.vfat
|
|
|-- fw_dynamic.bin
|
|
|-- fw_dynamic.elf
|
|
|-- Image
|
|
|-- rootfs.ext2
|
|
|-- rootfs.ext4 -> rootfs.ext2
|
|
|-- sdcard.img
|
|
|-- u-boot-spl.bin
|
|
`-- u-boot.itb
|
|
|
|
Copy the sdcard.img to a SD card with "dd":
|
|
|
|
$ sudo dd if=sdcard.img of=/dev/sdX bs=4096
|
|
$ sudo sync
|
|
|
|
Your SD card partition should be:
|
|
|
|
Disk /dev/sdb: 14.48 GiB, 15552479232 bytes, 30375936 sectors
|
|
Disk model: Multi-Card
|
|
Units: sectors of 1 * 512 = 512 bytes
|
|
Sector size (logical/physical): 512 bytes / 512 bytes
|
|
I/O size (minimum/optimal): 512 bytes / 512 bytes
|
|
Disklabel type: dos
|
|
Disk identifier: 0x00000000
|
|
|
|
Device Boot Start End Sectors Size Id Type
|
|
/dev/sdb1 1 4096 4096 2M c W95 FAT32 (LBA)
|
|
/dev/sdb2 * 4097 126976 122880 60M 83 Linux
|
|
|
|
Insert SD card and reset the board, it should boot Linux from mmc.
|