81 lines
1.8 KiB
Plaintext
81 lines
1.8 KiB
Plaintext
Aspeed AST2600 EVB
|
|
|
|
Introduction
|
|
============
|
|
|
|
The AST2600 EVB is an evaluation board for the AST2600 SoC, most
|
|
commonly used as a Server Management Processor. It includes a
|
|
Dual-core ARM Cortex A7 processor with DDR4 SDRAM (up to 2GB), SPI
|
|
flash memory devices for BMC and host firmwares and numerous
|
|
controllers to drive the server board.
|
|
|
|
https://www.aspeedtech.com/server_ast2600/
|
|
|
|
How to build it
|
|
===============
|
|
|
|
Configure buildroot:
|
|
|
|
$ make aspeed_ast2600evb_defconfig
|
|
|
|
Compile everything and build the rootfs image:
|
|
|
|
$ make
|
|
|
|
Result of the build
|
|
===================
|
|
|
|
After building, the output/images directory contains:
|
|
|
|
output/images/
|
|
├── aspeed-ast2600-evb.dtb
|
|
├── flash.img
|
|
├── image.itb
|
|
├── rootfs.cpio
|
|
├── rootfs.cpio.xz
|
|
├── rootfs.tar
|
|
├── u-boot.bin
|
|
└── zImage
|
|
|
|
Flashing the image
|
|
==================
|
|
|
|
To update the contents of the first flash device, copy flash.img :
|
|
|
|
$ flashcp flash.img /dev/mtd0
|
|
|
|
or simply the boot loader:
|
|
|
|
$ flashcp u-boot.bin /dev/mtd1
|
|
|
|
Preparing the board
|
|
===================
|
|
|
|
* Connect a serial line to the board
|
|
* Power-up the board
|
|
|
|
Booting the board
|
|
=================
|
|
|
|
The AST2600 EVB boots from the SPI flash device directly and loads a
|
|
first bootloader (usually U-Boot). U-Boot will attempt to load a Linux
|
|
kernel from the same flash device by default but other storage could
|
|
be used.
|
|
|
|
* from U-Boot
|
|
|
|
The FIT image image.itb can be used to boot the board from U-Boot
|
|
using tftp
|
|
|
|
* with QEMU
|
|
|
|
$ qemu-system-arm -M ast2600-evb \
|
|
-drive file=output/images/flash.img,format=raw,if=mtd \
|
|
-nographic
|
|
|
|
$ qemu-system-arm -M ast2600-evb \
|
|
-kernel output/images/zImage \
|
|
-initrd output/images/rootfs.cpio \
|
|
-dtb output/images/aspeed-ast2600-evb.dtb \
|
|
-nographic
|