buildroot

History

Giulio Benetti 842f19849e configs/asus_tinker_rk3288_defconfig: switch to zImage and bump Linux to 6.1.44, U-Boot to 2023.07 uImage is almost deprecated so let's switch to zImage. Let's also bump Linux version to 6.1.44, U-Boot to 2023.07 and remove BR2_TARGET_UBOOT_NEEDS_PYTHON3 since it's selected by BR2_TARGET_UBOOT_NEEDS_PYLIBFDT. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>		2024-02-07 00:01:20 +01:00
..
extlinux.conf	configs/asus_tinker_rk3288_defconfig: switch to zImage and bump Linux to 6.1.44, U-Boot to 2023.07	2024-02-07 00:01:20 +01:00
genimage.cfg	configs/asus_tinker_rk3288: fix boot by prepending tpl to spl+u-boot	2023-02-10 23:29:10 +01:00
post-build.sh	configs/asus_tinker_rk3288: fix boot by prepending tpl to spl+u-boot	2023-02-10 23:29:10 +01:00
readme.txt	board/asus/tinker: add a note to readme.txt for power supply	2023-02-10 23:31:15 +01:00

readme.txt

Tinker RK3288
=============

Tinker Board is a Single Board Computer (SBC) in an ultra-small form
factor that offers class-leading performance while leveraging outstanding
mechanical compatibility.

Tinker link:
https://www.asus.com/in/Single-Board-Computer/Tinker-Board/

Wiki link:
https://openedev.amarulasolutions.com/display/ODWIKI/Tinker+RK3288

How to build it
===============

  $ make asus_tinker_rk3288_defconfig

Then you can edit the build options using

  $ make menuconfig

Compile all and build rootfs image:

  $ make

Prepare your SDCard
===================

Buildroot generates a ready-to-use SD card image that you can flash directly to
the card. The image will be in output/images/sdcard.img.
You can write this image directly to an SD card device (i.e. /dev/xxx):

  $ sudo dd if=output/images/sdcard.img of=/dev/xxx
  $ sudo sync

Finally, you can insert the SD card to the Tinker RK3288 board and boot it.

NOTE:
USB power supply requires more than the standard 500mA USB current, so
this board must be supplied from a capable port or from an external
AC/DC adapter. Otherwise it will hang forever while loading the kernel
image.