31 lines
1.0 KiB
Plaintext
31 lines
1.0 KiB
Plaintext
NXP i.MXRT1050 EVK board
|
|
------------------------
|
|
|
|
i.MX RT1050 are NXP's crossover MCUs. They combine the high performance and high
|
|
level of integration of an applications processors with the ease-of-use and
|
|
real-time functionality of a microcontroller. The i.MX RT1050 MCU runs on the Arm
|
|
Cortex-M7 core at 600 MHz.
|
|
https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/i-mx-rt1050-evaluation-kit:MIMXRT1050-EVK
|
|
|
|
To build a minimal support for this board:
|
|
|
|
$ make imxrt1050-evk_defconfig
|
|
$ make
|
|
|
|
Buildroot prepares a bootable "sdcard.img" image in the output/images/
|
|
directory, ready to be flashed into the SD card:
|
|
|
|
$ dd if=output/images/sdcard.img of=/dev/sdX
|
|
Where 'sdX' is the device node of the uSD.
|
|
|
|
Jumper settings:
|
|
|
|
SW7: 1 0 1 0
|
|
|
|
Where 0 means bottom position and 1 means top position (from the
|
|
switch label numbers reference).
|
|
|
|
Connect the USB cable between the EVK and the PC for the console.
|
|
|
|
Insert the micro SD card in the board, power it up and U-Boot messages should come up.
|