78 lines
1.7 KiB
Plaintext
78 lines
1.7 KiB
Plaintext
Build
|
|
=====
|
|
|
|
First, configure Buildroot for your WarpBoard.
|
|
make warpboard_defconfig
|
|
|
|
Build all components:
|
|
make
|
|
|
|
You will find in ./output/images/ the following files:
|
|
- imx6sl-warp.dtb
|
|
- rootfs.ext4
|
|
- rootfs.tar
|
|
- sdcard.img
|
|
- u-boot.imx
|
|
- zImage
|
|
|
|
Update uboot
|
|
============
|
|
|
|
- Put warpboard in USB download mode by closing the j2 jumper on the
|
|
daugther board
|
|
|
|
- Load u-boot.imx in the WarpBoard by using the imx-usb-loader host utility:
|
|
|
|
$ ./output/host/bin/imx_usb -c output/host/etc/imx-loader.d/ output/images/u-boot.imx
|
|
|
|
- U-Boot will appear in minicom
|
|
|
|
- Reset the U-Boot environment to its default:
|
|
=> env default -f -a
|
|
=> saveenv
|
|
|
|
- Run the DFU command in U-Boot:
|
|
=> dfu 0 mmc 0
|
|
|
|
- Transfer U-Boot into flash by running this command in host side:
|
|
|
|
$ sudo ./output/host/bin/dfu-util -D output/images/u-boot.imx -a boot
|
|
|
|
- remove power and put the WarpBoard back into normal boot mode by
|
|
opening the j2 jumper.
|
|
|
|
Update linux & rootfs
|
|
=====================
|
|
|
|
Run the 'ums' command from the U-Boot prompt to mount the eMMC as USB mass
|
|
storage:
|
|
|
|
=> ums 0 mmc 0
|
|
|
|
And then flash the sdcard.img into the eMMC:
|
|
|
|
dd if=output/images/sdcard.img of=/dev/<your-sd-device>
|
|
|
|
*** WARNING! This will destroy all the eMMC content. Use it with care! ***
|
|
|
|
Using bluetooth
|
|
================
|
|
|
|
Enable the bluez_utils or bluez5_utils package, and then run:
|
|
|
|
$ hciattach /dev/ttymxc4 any
|
|
$ hciconfig hci0 up
|
|
|
|
Using Wifi
|
|
==========
|
|
|
|
# modprobe brcmfmac
|
|
# iwconfig wlan0 essid ACCESSPOINTNAME
|
|
# wpa_passphrase ACCESSPOINTNAME > /etc/wpa.conf
|
|
(enter the wifi password and press enter)
|
|
# wpa_supplicant -Dwext -iwlan0 -c /etc/wpa.conf &
|
|
# udhcpc -i wlan0
|
|
# ping buildroot.org
|
|
|
|
Enjoy!
|