58 lines
1.4 KiB
Plaintext
58 lines
1.4 KiB
Plaintext
Intro
|
|
=====
|
|
|
|
This default configuration will allow you to start experimenting with the
|
|
buildroot environment for the Nanopi R2S. With the current configuration
|
|
it will bring-up the board, and allow access through the serial console.
|
|
|
|
Nanopi R2S link:
|
|
https://www.friendlyarm.com/index.php?route=product/product&path=69&product_id=282
|
|
|
|
This configuration uses ATF, U-Boot mainline and kernel mainline.
|
|
|
|
How to build
|
|
============
|
|
|
|
$ make friendlyarm_nanopi_r2s_defconfig
|
|
$ make
|
|
|
|
Note: you will need access to the internet to download the required
|
|
sources.
|
|
|
|
Files created in output directory
|
|
=================================
|
|
|
|
output/images
|
|
|
|
├── bl31.elf
|
|
├── boot.vfat
|
|
├── extlinux
|
|
├── idbloader.img
|
|
├── Image
|
|
├── rk3328-nanopi-r2s.dtb
|
|
├── rootfs.ext2
|
|
├── rootfs.ext4 -> rootfs.ext2
|
|
├── rootfs.tar
|
|
├── sdcard.img
|
|
├── u-boot.bin
|
|
└── u-boot.itb
|
|
|
|
How to write the SD card
|
|
========================
|
|
|
|
Once the build process is finished you will have an image called "sdcard.img"
|
|
in the output/images/ directory.
|
|
|
|
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
|
|
|
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
|
$ sudo sync
|
|
|
|
Insert the micro SDcard in your Nanopi R2S and power it up. The console
|
|
is on the serial line, 1500000 8N1.
|
|
|
|
Notes
|
|
=====
|
|
|
|
This configuration can also be used to drive the Friendlyarm Nanopi Neo3 board.
|