buildroot

History

Giulio Benetti fe8f95a61e configs/mangopi_mq1rdw1_defconfig: new defconfig Add support for MangoPi MQ1RDW2: https://mangopi.org/mqr An Allwinner T113-S3(2xCortex-A7+128MB DDR3-1600 embedded) based SBC with: * USB-OTG Type-C socket * USB-HOST Type-C socket * 2x 18 pin GPIO headers * TF card slot * RTL8723DS WiFi module with ext. antenna connector * 40 pin RGB FPC connector * 6 pin CTP FPC connector * 24 pin DVP FPC connector * onboard mic * onboard audio amplifier * FEL,reset button Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>		2024-02-11 23:13:12 +01:00
..
rootfs_overlay	configs/mangopi_mq1rdw1_defconfig: new defconfig	2024-02-11 23:13:12 +01:00
genimage.cfg	configs/mangopi_mq1rdw1_defconfig: new defconfig	2024-02-11 23:13:12 +01:00
readme.txt	configs/mangopi_mq1rdw1_defconfig: new defconfig	2024-02-11 23:13:12 +01:00

readme.txt

MangoPi MQ1RDW2
===============

MangoPi MQ1RDW2 is a tiny ARM Cortex-A7 based single board computer.
It's built around Allwinner T113-S3 dual core 1GHz CPU with integrated
128MB DDR3-1600 RAM.
Board features:
- USB-OTG Type-C socket
- USB-HOST Type-C socket
- 2x 18 pin GPIO headers
- TF card slot
- RTL8723DS WiFi module with ext. antenna connector
- 40 pin RGB FPC connector
- 6 pin CTP FPC connector
- 24 pin DVP FPC connector
- onboard mic
- onboard audio amplifier
- FEL,reset button

How to build
============

$ make mangopi_mq1rdw2_defconfig
$ make

Wifi
==========

Edit board/mangopi/mq1rdw2/overlay/etc/wpa_supplicant.conf or
/etc/wpa_supplicant.conf once connected to the board:

* Replace YOURSSID with your AP ssid
* Replace YOURPASSWD with your AP password

How to write the SD card
========================

Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.

Copy the bootable "sdcard.img" onto an SD card with "dd":

  $ sudo dd if=output/images/sdcard.img of=/dev/sdX

Connect a TTL UART to the UART3 on P8 header (unpopulated), insert the microSD card and
plug in a USB-C cable to the OTG or HOST connector to boot the system.