buildroot

History

Marcin Niestroj 8e75e40f7a configs/orangepi_zero3: use upstream U-Boot and Linux There is now support in both upstream U-Boot and upstream Linux. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Tested-by: Sergey Kuzminov <kuzminov.sergey81@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>	2024-01-13 21:50:05 +01:00
..
readme.txt	…

Marcin Niestroj 8e75e40f7a configs/orangepi_zero3: use upstream U-Boot and Linux

There is now support in both upstream U-Boot and upstream Linux.

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Tested-by: Sergey Kuzminov <kuzminov.sergey81@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

2024-01-13 21:50:05 +01:00

readme.txt

…

readme.txt

Intro
=====

This default configuration will allow you to start experimenting with the
buildroot environment for the Orangepi Zero3. With the current configuration
it will bring-up the board, and allow access through the serial console.

Orangepi Zero3 link:
http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-3.html

This configuration uses Orangepi's fork of U-Boot and Linux kernel.

How to build
============

    $ make orangepi_zero3_defconfig
    $ make

Note: you will need access to the internet to download the required
sources.

How to write the SD card
========================

Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.

Copy the bootable "sdcard.img" onto an SD card with "dd":

  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
  $ sudo sync

Insert the micro SDcard in your Orangepi Zero3 and power it up. The console
is on the serial line, 115200 8N1.