buildroot

History

Angelo Compagnucci 286628bcc2 configs/lichee_rv: new defconfig Lichee RV - Nezha CM is a compute module with modular design, equipped with Allwinner D1 chip (based on T-Head XuanTie C906 core), 512MB DDR3 RAM. Board support is based on the nezha defconfig already available in buildroot. https://wiki.sipeed.com/hardware/en/lichee/RV/RV.html https://linux-sunxi.org/Sipeed_Lichee_RV Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com> Reviewed-by: Indrek Kruusa <indrek.kruusa@gmail.com> Tested-by: Indrek Kruusa <indrek.kruusa@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>		2022-12-18 15:53:20 +01:00
..
overlay/boot/extlinux	configs/lichee_rv: new defconfig	2022-12-18 15:53:20 +01:00
genimage.cfg	configs/lichee_rv: new defconfig	2022-12-18 15:53:20 +01:00
readme.txt	configs/lichee_rv: new defconfig	2022-12-18 15:53:20 +01:00

readme.txt

Lichee RV
===============

Lichee RV - Nezha CM is a compute module with modular design, equipped
with Allwinner D1 chip (based on T-Head XuanTie C906 core), 512MB DDR3 RAM.
It can boot from TF card or SD-NAND, uses two sets of M.2 b key 67 pin
connectors to route all IO, making it convient for wide use and easy to replace.

How to build
============

$ make sipeed_lichee_rv_defconfig
$ make

How to write the SD card
========================

Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.

Copy the bootable "sdcard.img" onto an SD card with "dd":

  $ sudo dd if=output/images/sdcard.img of=/dev/sdX

Connect a TTL UART to the debug connector, insert the microSD card and
plug in a USB-C cable to the PWR connector to boot the system.