buildroot/configs/raspberrypi3_qt5we_defconfig

61 lines
1.8 KiB
Plaintext

BR2_arm=y
BR2_cortex_a53=y
BR2_ARM_FPU_NEON_VFPV4=y
BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_SYSTEM_DHCP="eth0"
# Linux headers same as kernel, a 6.1 series
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
# Build the DTB from the kernel sources
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2710-rpi-3-b bcm2710-rpi-3-b-plus bcm2710-rpi-cm3"
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
# Build Qt5 WebEngine
BR2_PACKAGE_LIBERATION=y
BR2_PACKAGE_QT5=y
BR2_PACKAGE_QT5BASE_EXAMPLES=y
BR2_PACKAGE_QT5BASE_GIF=y
BR2_PACKAGE_QT5BASE_JPEG=y
BR2_PACKAGE_QT5BASE_PNG=y
BR2_PACKAGE_QT5WEBENGINE=y
BR2_PACKAGE_QT5WEBENGINE_PROPRIETARY_CODECS=y
BR2_PACKAGE_RPI_FIRMWARE=y
BR2_PACKAGE_RPI_FIRMWARE_BOOTCODE_BIN=y
BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI=y
BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE="board/raspberrypi3/config_3_qt5we.txt"
BR2_PACKAGE_RPI_USERLAND=y
BR2_PACKAGE_CA_CERTIFICATES=y
BR2_PACKAGE_NTP=y
# Required tools to create the SD image
BR2_PACKAGE_HOST_DOSFSTOOLS=y
BR2_PACKAGE_HOST_GENIMAGE=y
BR2_PACKAGE_HOST_MTOOLS=y
# Filesystem / image
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
BR2_TARGET_ROOTFS_EXT2_SIZE="400M"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi3/post-build.sh"
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi3/post-image.sh"
# Enable compressed kernel module support
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
BR2_PACKAGE_KMOD_TOOLS=y
BR2_PACKAGE_XZ=y
BR2_PACKAGE_KMOD=y
BR2_PACKAGE_HOST_KMOD_XZ=y