76 lines
1.8 KiB
Plaintext
76 lines
1.8 KiB
Plaintext
Testing rdma-core userspace tools
|
|
=================================
|
|
|
|
Testing rdma-core using Linux software RoCE implementation:
|
|
https://en.wikipedia.org/wiki/RDMA_over_Converged_Ethernet
|
|
|
|
Using two systems with working TCP/IP configuration, for example:
|
|
- Server IP: 192.168.123.10
|
|
- Client IP: 192.168.123.20
|
|
|
|
Make sure firewall configurations are appropriate. Routable RoCE v2
|
|
uses udp/4791. ibv_rc_pingpong uses tcp/18515 for initial
|
|
synchronization.
|
|
|
|
Note: this test can be executed in two qemu virtual machines with
|
|
bridged networking.
|
|
|
|
|
|
Kernel configuration
|
|
--------------------
|
|
|
|
The Linux Kernel needs some InfiniBand configuration. In this example
|
|
the kernel "rdma_rxe" driver is needed (CONFIG_RDMA_RXE=y). The Kernel
|
|
config fragment file used for package test can be used as a starting
|
|
point. See:
|
|
|
|
support/testing/tests/package/test_rdma_core/linux-rdma.fragment
|
|
|
|
|
|
Buildroot package configuration
|
|
-------------------------------
|
|
|
|
For setting up a software RoCE link, the "rdma" program is needed. It
|
|
is provided by the "iproute2" package, when "libmnl" is also
|
|
selected. Make sure to have in your Buildroot configuration:
|
|
|
|
BR2_PACKAGE_IPROUTE2=y
|
|
BR2_PACKAGE_LIBMNL=y
|
|
BR2_PACKAGE_RDMA_CORE=y
|
|
|
|
|
|
Setting up the rdma link
|
|
------------------------
|
|
|
|
On both server and client:
|
|
|
|
modprobe rdma_rxe
|
|
rdma link add rxe0 type rxe netdev eth0
|
|
|
|
|
|
Testing with rping
|
|
------------------
|
|
|
|
On the server side, run the command:
|
|
|
|
rping -s -v
|
|
|
|
On the client side, run the command:
|
|
|
|
rping -c -v -a 192.168.123.10
|
|
|
|
|
|
Testing with ibv_rc_pingpong
|
|
----------------------------
|
|
|
|
To test with the pingpong example using the reliable connected (RC)
|
|
transport:
|
|
|
|
On the server side, run the command:
|
|
|
|
ibv_rc_pingpong -d rxe0 -g 1
|
|
|
|
On the client side, run the command:
|
|
|
|
ibv_rc_pingpong -d rxe0 -g 1 192.168.123.10
|