59 lines
1.3 KiB
Plaintext
59 lines
1.3 KiB
Plaintext
This document describes the Buildroot support for the following
|
|
Xilinx Versal boards:
|
|
|
|
******************************************
|
|
Supported Versal Boards:
|
|
Xilinx VCK190 board
|
|
Xilinx VPK180 board
|
|
******************************************
|
|
|
|
Evaluation board features can be found here with the links below.
|
|
|
|
VCK190:
|
|
https://www.xilinx.com/products/boards-and-kits/vck190.html
|
|
|
|
VPK180:
|
|
https://www.xilinx.com/products/boards-and-kits/vpk180.html
|
|
|
|
|
|
How to build it
|
|
===============
|
|
|
|
Configure Buildroot:
|
|
|
|
$ make versal_vck190_defconfig
|
|
|
|
Compile everything and build the rootfs image:
|
|
|
|
$ make
|
|
|
|
Result of the build
|
|
-------------------
|
|
|
|
After building, you should get a tree like this:
|
|
|
|
output/images/
|
|
+-- boot.bin
|
|
+-- boot.vfat
|
|
+-- Image
|
|
+-- rootfs.ext2
|
|
+-- rootfs.ext4 -> rootfs.ext2
|
|
+-- sdcard.img
|
|
+-- system.dtb -> versal-vck190-rev1.1.dtb
|
|
`-- versal-vck190-rev1.1.dtb
|
|
|
|
How to write the SD card
|
|
========================
|
|
|
|
WARNING! This will destroy all the card content. Use with care!
|
|
|
|
The sdcard.img file is a complete bootable image ready to be written
|
|
on the boot medium. To install it, simply copy the image to an SD
|
|
card:
|
|
|
|
# dd if=output/images/sdcard.img of=/dev/sdX
|
|
|
|
Where 'sdX' is the device node of the SD.
|
|
|
|
Eject the SD card, insert it in the board, and power it up.
|