48 lines
1.3 KiB
ReStructuredText
48 lines
1.3 KiB
ReStructuredText
Generic Output Button
|
|
=====================
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up generic output buttons in ESPHome that control an output component.
|
|
:image: upload.svg
|
|
|
|
The ``output`` button platform allows you to use any output component as a button. This can for example be used to
|
|
momentarily set a GPIO pin using a button.
|
|
|
|
.. figure:: images/generic-ui.png
|
|
:align: center
|
|
:width: 80.0%
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
output:
|
|
- platform: gpio
|
|
pin: GPIOXX
|
|
id: output1
|
|
|
|
button:
|
|
- platform: output
|
|
name: "Generic Output"
|
|
output: output1
|
|
duration: 500ms
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
|
|
- **output** (**Required**, :ref:`config-id`): The ID of the output component to use.
|
|
- **duration** (**Required**, :ref:`config-time`): How long the output should be set when the button is pressed.
|
|
- All other options from :ref:`Button <config-button>`.
|
|
|
|
.. note::
|
|
|
|
When used with a :doc:`/components/output/gpio`, the pin will be low by default and pulled high when the button is
|
|
pressed. To invert this behaviour and have the pin pulled low when the button is pressed, set the `inverted` option
|
|
in the :ref:`config-pin_schema`.
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :doc:`/components/output/index`
|
|
- :apiref:`output/button/output_button.h`
|
|
- :ghedit:`Edit`
|