esphome-docs/components/display/st7920.rst

65 lines
2.2 KiB
ReStructuredText

ST7920 LCD Graphic Display
==========================
.. seo::
:description: Instructions for setting up ST7920 LCD display drivers.
:image: st7920.jpg
.. _st7920:
Usage
-----
The ``st7920`` display platform allows you to use
ST7920 (`datasheet <http://www.elecrow.com/download/SPE_IM120424014_EONE_12864_Graphic_LCD.pdf>`__,
`electrodragon <https://www.elecrow.com/128x64-graphic-lcd-p-1143.html>`__)
displays with ESPHome. Note that this component is for displays that are connected via the 3-Wire :ref:`SPI bus <spi>`.
It's a monochrome LCD graphic display.
.. figure:: images/st7920-full.jpg
:align: center
:width: 75.0%
ST7920 LCD Graphic Display
Connect D5 to the E pin you chose for the :ref:`SPI bus <spi>`, connect D7 to the R/W pin and ``RS`` to some GPIO pins on the ESP.
For SPI communication it's important to connect PSB on the LCD to GND.
.. code-block:: yaml
# Example configuration entry
spi:
clk_pin: D5
mosi_pin: D7
display:
- platform: st7920
cs_pin:
number: 4
inverted: true
lambda: |-
it.print(0, 0, id(font), "Hello World!");
Configuration variables:
************************
- **cs_pin** (**Required**, :ref:`Pin Schema <config-pin_schema>`): Sometimes also called ``RS``. For ST7920 should be inverted.
- **width** (**Required**, int): The "width" of a screen. Defaults to 128.
- **height** (**Required**, int): The "height" of a screen. Defaults to 64;
- **rotation** (*Optional*): Set the rotation of the display. Everything you draw in ``lambda:`` will be rotated
by this option. One of ```` (default), ``90°``, ``180°``, ``270°``.
- **lambda** (*Optional*, :ref:`lambda <config-lambda>`): The lambda to use for rendering the content on the display.
See :ref:`display-engine` for more information.
- **update_interval** (*Optional*, :ref:`config-time`): The interval to re-draw the screen. Defaults to ``60s``.
- **pages** (*Optional*, list): Show pages instead of a single lambda. See :ref:`display-pages`.
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
See Also
--------
- :doc:`index`
- :apiref:`st7920/st7920.h`
- :ghedit:`Edit`