83 lines
2.9 KiB
ReStructuredText
83 lines
2.9 KiB
ReStructuredText
ESP32 RMT LED Strip
|
|
===================
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up addressable lights like NEOPIXEL on an ESP32 using the RMT peripheral.
|
|
:image: color_lens.svg
|
|
|
|
This is a component using the ESP32 RMT peripheral to drive most addressable LED strips.
|
|
|
|
.. code-block:: yaml
|
|
|
|
light:
|
|
- platform: esp32_rmt_led_strip
|
|
rgb_order: GRB
|
|
pin: GPIOXX
|
|
num_leds: 30
|
|
rmt_channel: 0
|
|
chipset: ws2812
|
|
name: "My Light"
|
|
|
|
Configuration variables
|
|
-----------------------
|
|
|
|
- **pin** (**Required**, :ref:`config-pin`): The pin for the data line of the light.
|
|
- **num_leds** (**Required**, int): The number of LEDs in the strip.
|
|
- **rmt_channel** (**Required**, int): The RMT channel to use. If using multiple strips, you need to use different channels.
|
|
|
|
.. csv-table::
|
|
:header: "ESP32 Variant", "Channels"
|
|
|
|
"ESP32", "0, 1, 2, 3, 4, 5, 6, 7"
|
|
"ESP32-S2", "0, 1, 2, 3"
|
|
"ESP32-S3", "0, 1, 2, 3"
|
|
"ESP32-C3", "0, 1"
|
|
|
|
- **chipset** (**Required**, enum): The chipset to apply known timings from. Not used if specifying the timings manually, see below.
|
|
- ``WS2811``
|
|
- ``WS2812``
|
|
- ``SK6812``
|
|
- ``APA106``
|
|
- ``SM16703``
|
|
|
|
- **rgb_order** (**Required**, string): The RGB order of the strip.
|
|
- ``RGB``
|
|
- ``RBG``
|
|
- ``GRB``
|
|
- ``GBR``
|
|
- ``BGR``
|
|
- ``BRG``
|
|
|
|
- **is_rgbw** (*Optional*, boolean): Set to ``true`` if the strip is RGBW. Defaults to ``false``.
|
|
- **is_wrgb** (*Optional*, boolean): Set to ``true`` if the strip is WRGB. Defaults to ``false``.
|
|
- **max_refresh_rate** (*Optional*, :ref:`config-time`):
|
|
A time interval used to limit the number of commands a light can handle per second. For example
|
|
16ms will limit the light to a refresh rate of about 60Hz. Defaults to sending commands as quickly as
|
|
changes are made to the lights.
|
|
|
|
- All other options from :ref:`Light <config-light>`.
|
|
|
|
|
|
Manual Timings
|
|
**************
|
|
|
|
These can be used if you know the timings and your chipset is not set above. If you have a new specific chipset,
|
|
please consider adding support to the codebase and add it to the list above.
|
|
|
|
- **bit0_high** (*Optional*, :ref:`config-time`): The time to hold the data line high for a ``0`` bit.
|
|
- **bit0_low** (*Optional*, :ref:`config-time`): The time to hold the data line low for a ``0`` bit.
|
|
- **bit1_high** (*Optional*, :ref:`config-time`): The time to hold the data line high for a ``1`` bit.
|
|
- **bit1_low** (*Optional*, :ref:`config-time`): The time to hold the data line low for a ``1`` bit.
|
|
- **reset_high** (*Optional*, :ref:`config-time`): The time to hold the data line high after writing
|
|
the state. Defaults to ``0 us``.
|
|
- **reset_low** (*Optional*, :ref:`config-time`): The time to hold the data line low after writing
|
|
the state. Defaults to ``0 us``.
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :doc:`/components/light/index`
|
|
- :doc:`/components/power_supply`
|
|
- :apiref:`esp32_rmt_led_strip/esp32_rmt_led_strip.h`
|
|
- :ghedit:`Edit`
|