52 lines
1.7 KiB
ReStructuredText
52 lines
1.7 KiB
ReStructuredText
H-bridge Light
|
|
==============
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up a hbridge light.
|
|
:image: brightness-medium.svg
|
|
|
|
The ``hbridge`` light platform creates a dual color brightness controlled light from two
|
|
:ref:`float output component <output>`.
|
|
|
|
.. figure:: images/hbridge-ui.png
|
|
:align: center
|
|
:width: 40.0%
|
|
|
|
H-bridge lights are very common for Christmas lighting and they use 2 wires for a bunch of LEDs.
|
|
The pins are switched alternatively to allow two sets of lights to operate.
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
light:
|
|
- platform: hbridge
|
|
id: mainlight
|
|
name: "Hbridge Lights"
|
|
pin_a: pina
|
|
pin_b: pinb
|
|
|
|
Internally, H-bridge lights are implemented as cold/warm white lights. This means that the brightness of the two colors
|
|
is mapped to the cold white and warm white values, even if the colors aren't actually white in reality. To individually
|
|
control the colors in the :ref:`light control actions <light-turn_on_action>`, you need to use the ``cold_white`` and
|
|
``warm_white`` options.
|
|
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
|
|
- **pin_a** (**Required**, :ref:`config-id`): The id of the first float :ref:`output` to use for this light.
|
|
- **pin_b** (**Required**, :ref:`config-id`): The id of the second float :ref:`output` to use for this light.
|
|
- All other options from :ref:`Light <config-light>`.
|
|
|
|
.. note::
|
|
|
|
As we are switching the H-bridge in software, the light may glitch every so often when other tasks run on the MCU.
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :doc:`/components/light/index`
|
|
- :doc:`/components/output/esp8266_pwm`
|
|
- :apiref:`hbridge/light/hbridge_light.h`
|
|
- :ghedit:`Edit`
|