home-assistant
/
esphome-docs
mirror of https://github.com/esphome/esphome-docs.git
0
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
esphome-docs/components/light/neopixelbus.rst

176 lines
6.5 KiB
ReStructuredText
Raw Permalink Blame History

NeoPixelBus Light
=================
.. seo::
:description: Instructions for setting up Neopixel addressable lights.
:image: color_lens.svg
.. warning::
NeoPixelBus does **not** work with ESP-IDF.
For clockless lights, you can use :doc:`esp32_rmt_led_strip`, and for SPI LEDs see :doc:`spi_led_strip`.
The ``neopixelbus`` light platform allows you to create RGB lights
in ESPHome for individually addressable lights like NeoPixel or WS2812.
It is very similar to the :doc:`fastled` platform.
In fact, most addressable lights are supported through both light platforms. The
difference is that they use different libraries: while the fastled platform uses
the `FastLED <https://github.com/FastLED/FastLED>`__ library, this component uses
the `NeoPixelBus <https://github.com/Makuna/NeoPixelBus/>`__ library internally.
.. code-block:: yaml
# Example configuration entry
light:
- platform: neopixelbus
type: GRB
variant: WS2811
pin: GPIOXX
num_leds: 60
name: "NeoPixel Light"
Configuration variables:
------------------------
**Base Options:**
- **num_leds** (**Required**, int): The number of LEDs attached.
**Type Options:**
- **type** (*Optional*, string): The type of light. This is used to specify
if it is an RGBW or RGB light and in which order the colors are. Defaults to
``GRB``. Change this if you have lights with white channel and/or the colors are in the wrong order.
- **variant** (**Required**, string): The chipset of the light.
The following options are supported:
- ``800KBPS`` (generic option, recommended for chipsets without explicit support)
- ``400KBPS``
- ``WS2811``
- ``WS2812``
- ``WS2812X``
- ``WS2813``
- ``SK6812``
- ``TM1814``
- ``TM1829``
- ``TM1914``
- ``APA106``
- ``LC8812``
Additionally the following two-wire chipsets (set ``data_pin`` and ``clock_pin``)
are supported:
- ``WS2801``
- ``DotStar``
- ``LPD6803``
- ``LPD8806``
- ``P9813``
- **method** (*Optional*, string): The method used to transmit the data. By default, ESPHome will try to use the best method
available for this chipset, ESP platform, and the given pin. See :ref:`methods <neopixelbus-methods>` for more information.
- **invert** (*Optional*, boolean): Invert data output, for use with n-type transistors. Defaults to ``no``.
**Pin Options:**
Some chipsets have two data pins to connect, others only have one.
If you have one line, only specify ``pin``, otherwise specify both ``clock_pin`` and ``data_pin``.
- **pin** (**Required**, :ref:`config-pin`): The pin for the data line of the light.
- **clock_pin** (**Required**, :ref:`config-pin`): The pin for the clock line of the light, for two-wire lights.
- **data_pin** (**Required**, :ref:`config-pin`): The pin for the data line of the light, for two-wire lights.
- All other options from :ref:`Light <config-light>`.
.. warning::
On ESP8266 it's highly recommended to connect the light strip to pin
GPIO3 to reduce flickering.
.. _neopixelbus-methods:
Methods
-------
NeoPixelBus supports different methods to transmit the pixel data to the light strip depending
on the chipset, ESP platform and pin.
Each of these has their own advantages/disadvantages regarding stability and speed. By default
ESPHome will choose the best one that is available on the device. However, you can override this
by manually supplying the ``method`` option.
.. code-block:: yaml
light:
- platform: neopixelbus
# ...
method:
type: esp8266_uart
bus: 0
async: false
Use the ``type`` configuration variable to select the method used. The additional configuration
settings vary by method:
- **bit_bang**: The simplest method and available on all platforms. However, it can produce quite a bit of flickering,
and so is not recommended for use. On ESP8266, supports pins GPIO0-GPIO15, on ESP32 pins GPIO0-GPIO31.
- **esp8266_dma**: The recommended method for ESP8266s. Only available on pin GPIO3.
- **esp8266_uart**: An alternative method for ESP8266s that uses the UART peripheral to send data.
Available on pin GPIO1 for bus 0, and GPIO2 for bus 1. Additional options:
- **bus** (*Optional*, int): The UART bus to use. If 0, the logger ``baud_rate`` option must
be set to 0 and logs over USB/serial won't work.
- **async** (*Optional*, boolean): Use an asynchronous transfer. Defaults to ``false``. If enabled,
the logger must be disabled even if bus 1 is used.
- **esp32_i2s**: The recommended method for ESP32, but not available on the ESP32-S3 or ESP32-C3.
Available on all output pins. Additional options:
- **bus** (*Optional*): The I2S bus to use. The ESP32 has bus 0 or 1 available, but the ESP32-S2 only bus 0.
One of ``0``, ``1``, ``dynamic``.
- **esp32_rmt**: An alternative method for ESP32 that uses the RMT peripheral to send data.
Available on all output pins. Additional options:
- **channel** (*Optional*): The RMT channel to use. The ESP32 has channels 0-7, ESP32-S2 0-3, ESP32-S3 0-3, and ESP32-C3 0-1.
Defaults to 6 on ESP32, and 1 on other ESP32 variants.
The following method is available only for two-wire chips (specify ``data_pin`` and ``clock_pin``):
- **spi**: Uses the hardware SPI interface to transmit the data. Available on both ESP platforms.
Additional options:
- **bus** (*Optional*, string): On ESP32s the SPI bus to be used can be selected. One of ``vspi`` and ``hspi``.
- **speed** (*Optional*, int): The frequency to send data with. Defaults to ``10MHz``. One of
``40MHz``, ``20MHz``, ``10MHz``, ``5MHz``, ``2MHz``, ``1MHz``, ``500KHz``.
On ESP8266 only GPIO13 can be used for ``data_pin`` and only GPIO14 can be used for ``clock_pin``.
The ``method`` key also accepts a short-hand syntax consisting of a single value for historic reasons. Usage of
this method is no longer recommended, but documented here for reference purposes. Possible values were:
- ``ESP8266_DMA`` (for ``esp8266_dma``)
- ``ESP8266_UART0`` (for ``esp8266_uart`` on bus 0)
- ``ESP8266_UART1`` (for ``esp8266_uart`` on bus 1)
- ``ESP8266_ASYNC_UART0`` (for ``esp8266_uart`` on bus 0 with async enabled)
- ``ESP8266_ASYNC_UART1`` (for ``esp8266_uart`` on bus 1 with async enabled)
- ``ESP32_I2S_0`` (for ``esp32_i2s`` on bus 0)
- ``ESP32_I2S_1`` (for ``esp32_i2s`` on bus 1)
- ``BIT_BANG`` (for ``bit_bang``)
See Also
--------
- :doc:`/components/light/index`
- :doc:`/components/light/fastled`
- :doc:`/components/power_supply`
- :apiref:`neopixelbus/neopixelbus_light.h`
- `NeoPixelBus library <https://github.com/Makuna/NeoPixelBus/wiki/ESP8266-NeoMethods>`__
- :ghedit:`Edit`
Reference in New Issue View Git Blame Copy Permalink