70 lines
2.9 KiB
ReStructuredText
70 lines
2.9 KiB
ReStructuredText
Seeed Studio MR60BHA2 60GHz mmWave Breathing and Heartbeat Detection Sensor Kit
|
|
===============================================================================
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up Seeed Studio MR60BHA2 60GHz mmWave Breathing and Heartbeat Detection Sensor Kit.
|
|
:image: seeed_mr60bha2.jpg
|
|
|
|
Component/Hub
|
|
-------------
|
|
|
|
The ``seeed_mr60bha2`` platform allows you to use Seeed Studio MR60BHA2 60GHz mmWave Fall Detection Sensor Kit with XIAO ESP32C6 (`Product Page <https://www.seeedstudio.com/MR60BHA2-60GHz-mmWave-Sensor-Breathing-and-Heartbeat-Module-p-5945.html>`__) with ESPHome.
|
|
|
|
The :ref:`UART <uart>` is required to be set up in your configuration for this sensor to work, ``parity`` and ``stop_bits`` **must be** respectively ``NONE`` and ``1``.
|
|
You can use the ESP32 software or hardware serial to use this MR60BHA2, its default baud rate is 115200.
|
|
|
|
.. figure:: images/seeed_mr60bha2.jpg
|
|
:align: center
|
|
:width: 50.0%
|
|
|
|
Seeed Studio MR60BHA2 60GHz mmWave Fall Detection Sensor Kit with XIAO ESP32C6
|
|
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
seeed_mr60bha2:
|
|
|
|
Configuration variables:
|
|
************************
|
|
|
|
- **uart_id** (*Optional*, :ref:`config-id`): Manually specify the ID of the :ref:`UART Component <uart>` if you want
|
|
to use multiple UART buses.
|
|
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID for this :doc:`seeed_mr60bha2` component if you need multiple components.
|
|
|
|
Sensor
|
|
------
|
|
|
|
The ``seeed_mr60bha2`` sensor allows you to perform different measurements.
|
|
|
|
.. code-block:: yaml
|
|
|
|
sensor:
|
|
- platform: seeed_mr60bha2
|
|
breath_rate:
|
|
name: "Real-time respiratory rate"
|
|
heart_rate:
|
|
name: "Real-time heart rate"
|
|
distance:
|
|
name: "Distance to detection object"
|
|
|
|
Configuration variables:
|
|
************************
|
|
|
|
- **breath_rate** (*Optional*, int): Radar-detected respiratory rate during the first 60 seconds.
|
|
All options from :ref:`Sensor <config-sensor>`.
|
|
- **heart_rate** (*Optional*, int): Heart rate during the first 60 seconds as detected by the radar.
|
|
All options from :ref:`Sensor <config-sensor>`.
|
|
- **distance** (*Optional*, int): Straight-line distance between the radar and the monitoring object.
|
|
All options from :ref:`Sensor <config-sensor>`.
|
|
|
|
|
|
See Also
|
|
--------
|
|
|
|
- `Official Using Documents for Seeed Studio MR60BHA2 60GHz mmWave Breathing and Heartbeat Detection Sensor Kit with XIAO ESP32C6 <https://wiki.seeedstudio.com/getting_started_with_mr60bha2_mmwave_kit/>`_
|
|
- `Product Detail Page for Seeed Studio MR60BHA2 60GHz mmWave Breathing and Heartbeat Detection Sensor Kit with XIAO ESP32C6 <https://www.seeedstudio.com/MR60BHA2-60GHz-mmWave-Sensor-Breathing-and-Heartbeat-Module-p-5945.html>`_
|
|
- `Source of inspiration for implementation <https://github.com/limengdu/MR60BHA2_ESPHome_external_components/>`_
|
|
- :apiref:`seeed_mr60bha2/seeed_mr60bha2.h`
|
|
- :ghedit:`Edit`
|