68 lines
2.5 KiB
ReStructuredText
68 lines
2.5 KiB
ReStructuredText
Tuya Select
|
|
===========
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up a Tuya device select.
|
|
:image: tuya.png
|
|
|
|
The ``tuya`` select platform creates a select from a tuya serial component
|
|
and requires :doc:`/components/tuya` to be configured.
|
|
|
|
.. code-block:: text
|
|
|
|
[08:51:09][C][tuya:032]: Tuya:
|
|
[08:51:09][C][tuya:043]: Datapoint 1: switch (value: ON)
|
|
[08:51:09][C][tuya:045]: Datapoint 24: int value (value: 220)
|
|
[08:51:09][C][tuya:045]: Datapoint 16: int value (value: 22)
|
|
[08:51:09][C][tuya:049]: Datapoint 2: enum (value: 1)
|
|
[08:51:09][C][tuya:045]: Datapoint 19: int value (value: 40)
|
|
[08:51:09][C][tuya:045]: Datapoint 101: int value (value: 1)
|
|
[08:51:09][C][tuya:045]: Datapoint 27: int value (value: -2)
|
|
[08:51:09][C][tuya:049]: Datapoint 43: enum (value: 1)
|
|
[08:51:09][C][tuya:049]: Datapoint 102: enum (value: 1)
|
|
[08:51:09][C][tuya:051]: Datapoint 45: bitmask (value: 0)
|
|
[08:51:09][C][tuya:043]: Datapoint 10: switch (value: ON)
|
|
[08:51:09][C][tuya:041]: Datapoint 38: raw (value: 06.00.14.08.00.0F.0B.1E.0F.0C.1E.0F.11.00.16.16.00.0F.08.00.16.17.00.0F (24))
|
|
[08:51:09][C][tuya:049]: Datapoint 36: enum (value: 1)
|
|
[08:51:09][C][tuya:057]: GPIO Configuration: status: pin 14, reset: pin 0 (not supported)
|
|
[08:51:09][C][tuya:061]: Status Pin: GPIO14
|
|
[08:51:09][C][tuya:063]: Product: '{"p":"gogb05wrtredz3bs","v":"1.0.0","m":0}'
|
|
|
|
On this controller, the datapoint 36 represents the temperature sensor selection
|
|
setting which is what we are interested in controlling using this platform.
|
|
|
|
Based on this, you can create the select as follows:
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Create a select
|
|
select:
|
|
- platform: "tuya"
|
|
name: "Sensor selection"
|
|
enum_datapoint: 2
|
|
optimistic: true
|
|
options:
|
|
0: Internal
|
|
1: Floor
|
|
2: Both
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
|
|
- **enum_datapoint** (**Required**, int): The enum datapoint id number for the select.
|
|
- **options** (**Required**, Map[int, str]): Provide a mapping from values (int) of
|
|
this Select to options (str) of the *enum_datapoint* and vice versa. All options and
|
|
all values have to be unique.
|
|
- **optimistic** (*Optional*, boolean): Whether to operate in optimistic mode - when in this mode,
|
|
any command sent to the Select will immediately update the reported state.
|
|
|
|
- All other options from :ref:`Select <config-select>`.
|
|
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :doc:`/components/select/index`
|
|
- :apiref:`tuya/select/tuya_select.h`
|
|
- :ghedit:`Edit`
|