67 lines
1.8 KiB
ReStructuredText
67 lines
1.8 KiB
ReStructuredText
EE895 CO₂, Temperature and Pressure Sensor
|
|
===================================================
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up EE895 CO₂ Temperature and Pressure
|
|
:image: EE895.png
|
|
|
|
The ``ee895`` sensor platform allows you to use your EE895 CO₂
|
|
(`datasheet <https://www.epluse.com/fileadmin/data/product/ee895/BA_EE895.pdf>`__,
|
|
`E+E EE895 <https://www.epluse.com/products/co2-measurement/co2-modules-and-probes/ee895/>`__) sensor with ESPHome.
|
|
The :ref:`I²C Bus <i2c>` is required to be set up in your configuration for this sensor to work. We recommend the use of pull up resistors.
|
|
|
|
.. figure:: images/EE895.png
|
|
:align: center
|
|
:width: 80.0%
|
|
|
|
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
sensor:
|
|
- platform: ee895
|
|
co2:
|
|
name: "Office CO2"
|
|
accuracy_decimals: 0
|
|
temperature:
|
|
name: "Office Temperature"
|
|
accuracy_decimals: 2
|
|
pressure:
|
|
name: "Office Pressure"
|
|
accuracy_decimals: 1
|
|
address: 0x5F
|
|
update_interval: 15s
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
|
|
- **temperature** (**Required**): The information for the Temperature sensor.
|
|
|
|
- All options from :ref:`Sensor <config-sensor>`.
|
|
|
|
- **co2** (**Required**): The information for the CO₂ sensor.
|
|
|
|
- All options from :ref:`Sensor <config-sensor>`.
|
|
|
|
- **pressure** (**Required**): The information for the Pressure sensor.
|
|
|
|
- All options from :ref:`Sensor <config-sensor>`.
|
|
|
|
- **address** (*Optional*, int): Manually specify the I²C address of the sensor.
|
|
Defaults to ``0x5F``.
|
|
|
|
- **update_interval** (*Optional*, :ref:`config-time`): The interval to check the
|
|
sensor. Defaults to ``60s``.
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :ref:`sensor-filters`
|
|
- :doc:`tee501`
|
|
- :doc:`hte501`
|
|
- :doc:`dht`
|
|
- :doc:`dht12`
|
|
- :apiref:`ee895/ee895.h`
|
|
- :ghedit:`Edit`
|