esphome-docs/components/sensor/fs3000.rst

51 lines
1.9 KiB
ReStructuredText

FS3000 Air Velocity Sensor
==========================
.. seo::
:description: Instructions for setting up the FS3000 Air Velocity sensor.
:image: fs3000.jpg
:keywords: FS3000
The FS3000 Air Velocity sensor allows you to use your FS3000
(`datasheet <https://www.renesas.com/kr/en/document/dst/fs3000-datasheet?r=1395551>`__,
`sparkfun <https://www.sparkfun.com/products/18377>`__)
sensors with ESPHome.
.. figure:: images/fs3000.jpg
:align: center
:width: 30.0%
FS3000 Air Velocity Sensor.
(Credit: `SparkFun <https://www.sparkfun.com/products/18377>`__, image compressed)
.. _SparkFun: https://www.sparkfun.com/products/18377
The FS3000 is a solid state air velocity sensor that communicates over over I²C. It is based on a MEMS thermopile sensor. There are two subtypes available: the FS3000-1005 measures air velocities between 0 meters/second and 7.23 meters/second, and the FS3000-1015 measures air velocities between 0 meters/second and 15 meters/second.
To use the sensor, first set up an :ref:`I²C Bus <i2c>` and connect the sensor to the specified pins.
.. code-block:: yaml
# Example configuration entry
sensor:
- platform: fs3000
name: "Air Velocity"
model: 1005
update_interval: 60s
Configuration variables:
------------------------
- **model** (**Required**, string): Specify FS3000 model, can be ``1005`` or ``1015``.
- **address** (*Optional*, int): Manually specifiy the I²C address of the sensor. Defaults to ``0x28``.
- **update_interval** (*Optional*, :ref:`config-time`): The interval to check the sensor. Defaults to ``60s``.
- All other options from :ref:`Sensor <config-sensor>`.
See Also
--------
- :ref:`sensor-filters`
- :apiref:`fs3000/fs3000.h`
- `SparkFun FS3000 Library <https://github.com/sparkfun/SparkFun_FS3000_Arduino_Library>`__ by `SparkFun <https://www.sparkfun.com/>`__
- :ghedit:`Edit`