78 lines
3.5 KiB
ReStructuredText
78 lines
3.5 KiB
ReStructuredText
Haier Climate Sensors
|
|
=====================
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up additional sensors for Haier climate devices.
|
|
:image: haier.svg
|
|
|
|
Additional sensors for Haier Climate device. **These sensors are supported only by the hOn protocol**.
|
|
|
|
|
|
.. figure:: images/haier-climate.jpg
|
|
:align: center
|
|
:width: 50.0%
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
sensor:
|
|
- platform: haier
|
|
haier_id: haier_ac
|
|
outdoor_temperature:
|
|
name: Haier outdoor temperature
|
|
humidity:
|
|
name: Haier Indoor Humidity
|
|
compressor_current:
|
|
name: Haier Compressor Current
|
|
compressor_frequency:
|
|
name: Haier Compressor Frequency
|
|
expansion_valve_open_degree:
|
|
name: Haier Expansion Valve Open Degree
|
|
indoor_coil_temperature:
|
|
name: Haier Indoor Coil Temperature
|
|
outdoor_coil_temperature:
|
|
name: Haier Outdoor Coil Temperature
|
|
outdoor_defrost_temperature:
|
|
name: Haier Outdoor Defrost Temperature
|
|
outdoor_in_air_temperature:
|
|
name: Haier Outdoor In Air Temperature
|
|
outdoor_out_air_temperature:
|
|
name: Haier Outdoor Out Air Temperature
|
|
power:
|
|
name: Haier Power
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
|
|
- **haier_id** (**Required**, :ref:`config-id`): The id of haier climate component
|
|
- **outdoor_temperature** (*Optional*): Temperature sensor for outdoor temperature.
|
|
All options from :ref:`Sensor <config-sensor>`.
|
|
- **humidity** (*Optional*): Sensor for indoor humidity. Make sure that your climate model supports this type of sensor.
|
|
All options from :ref:`Sensor <config-sensor>`.
|
|
- **compressor_current** (*Optional*): Sensor for climate compressor current. Make sure that your climate model supports this type of sensor.
|
|
All options from :ref:`Sensor <config-sensor>`.
|
|
- **compressor_frequency** (*Optional*): Sensor for climate compressor frequency. Make sure that your climate model supports this type of sensor.
|
|
All options from :ref:`Sensor <config-sensor>`.
|
|
- **expansion_valve_open_degree** (*Optional*): Sensor for climate's expansion valve open degree. Make sure that your climate model supports this type of sensor.
|
|
All options from :ref:`Sensor <config-sensor>`.
|
|
- **indoor_coil_temperature** (*Optional*): Temperature sensor for indoor coil temperature. Make sure that your climate model supports this type of sensor.
|
|
All options from :ref:`Sensor <config-sensor>`.
|
|
- **outdoor_coil_temperature** (*Optional*): Temperature sensor for outdoor coil temperature. Make sure that your climate model supports this type of sensor.
|
|
All options from :ref:`Sensor <config-sensor>`.
|
|
- **outdoor_defrost_temperature** (*Optional*): Temperature sensor for outdoor defrost temperature. Make sure that your climate model supports this type of sensor.
|
|
All options from :ref:`Sensor <config-sensor>`.
|
|
- **outdoor_in_air_temperature** (*Optional*): Temperature sensor incoming air temperature.
|
|
All options from :ref:`Sensor <config-sensor>`.
|
|
- **outdoor_out_air_temperature** (*Optional*): Temperature sensor for outgoing air temperature.
|
|
All options from :ref:`Sensor <config-sensor>`.
|
|
- **power** (*Optional*): Sensor for climate power consumption. Make sure that your climate model supports this type of sensor.
|
|
All options from :ref:`Sensor <config-sensor>`.
|
|
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :doc:`Haier Climate </components/climate/haier>`
|
|
- :ref:`sensor-filters`
|
|
- :ghedit:`Edit`
|