65 lines
2.2 KiB
ReStructuredText
65 lines
2.2 KiB
ReStructuredText
MCP9600 Thermocouple Amplifier
|
|
===========================================
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up the MCP9600 thermocouple amplifier
|
|
:image: mcp9600.jpg
|
|
:keywords: MCP9600
|
|
|
|
The ``mcp9600`` sensor platform allows you to use your MCP9600 and MCP9601
|
|
(`datasheet <https://cdn-learn.adafruit.com/assets/assets/000/105/040/original/MCP960X-Data-Sheet-20005426%281%29.pdf>`__,
|
|
`Adafruit`_) to measure the temperature of a connected thermocouple while also measuring the ambient temperature around the sensor with ESPHome. :ref:`I²C <i2c>` is
|
|
required to be set up in your configuration for this sensor to work.
|
|
|
|
.. note::
|
|
|
|
The :ref:`I²C <i2c>` bus must be set to a minimum of ``10khz`` due to the limitations of the MCP9600 and MCP9601.
|
|
|
|
.. figure:: images/mcp9600.jpg
|
|
:align: center
|
|
:width: 80.0%
|
|
|
|
MCP9600 Thermocouple Amplifier
|
|
|
|
.. _Adafruit: https://www.adafruit.com/product/4101
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
sensor:
|
|
- platform: mcp9600
|
|
hot_junction:
|
|
name: "Thermocouple Temperature"
|
|
cold_junction:
|
|
name: "Ambient Temperature"
|
|
thermocouple_type: K
|
|
address: 0x67
|
|
update_interval: 60s
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
|
|
- **hot_junction** (*Optional*): The information for the Hot Junction temperature sensor.
|
|
|
|
- All options from :ref:`Sensor <config-sensor>`.
|
|
|
|
- **cold_junction** (*Optional*): The information for the Cold Junction temperature sensor.
|
|
|
|
- All options from :ref:`Sensor <config-sensor>`.
|
|
|
|
- **thermocouple_type** (*Optional*): Set the thermocouple type. Options are:
|
|
K, J, T, N, S, E, B and R type thermocouple. Defaults to ``K``.
|
|
- **address** (*Optional*, int): Manually specify the I²C address of
|
|
the sensor. Defaults to ``0x67``.
|
|
- **update_interval** (*Optional*, :ref:`config-time`): The interval to check the
|
|
sensor. Defaults to ``60s``.
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :ref:`sensor-filters`
|
|
- :apiref:`mcp9600/mcp9600.h`
|
|
- `Adafruit MCP9600 Library <https://github.com/adafruit/Adafruit_MCP9600>`__ by `Adafruit <https://www.adafruit.com/>`__
|
|
- `SparkFun MCP9600 Library <https://github.com/sparkfun/SparkFun_MCP9600_Arduino_Library>`__ by `SparkFun <https://www.sparkfun.com/>`__
|
|
- :ghedit:`Edit`
|