108 lines
3.1 KiB
ReStructuredText
108 lines
3.1 KiB
ReStructuredText
MLX90393 Triple-axis Magnetometer
|
|
=================================
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up MLX90393 Triple-Axis magnetometer sensor.
|
|
:image: mlx90393.jpg
|
|
:keywords: MLX90393
|
|
|
|
The ``mlx90393`` sensor platform allows you to use your MLX90393
|
|
(`datasheet <https://media.melexis.com/-/media/files/documents/datasheets/mlx90393-datasheet-melexis.pdf>`__,
|
|
`Adafruit`_) three axis magnetometer with ESPHome. The :ref:`I²C <i2c>` is required to be set up in
|
|
your configuration for this sensor to work.
|
|
|
|
.. figure:: images/mlx90393-full.jpg
|
|
:align: center
|
|
:width: 50.0%
|
|
|
|
MLX90393 Triple-axis Magnetometer
|
|
|
|
.. _Adafruit: https://www.adafruit.com/product/4022
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
sensor:
|
|
- platform: mlx90393
|
|
id: mlx
|
|
x_axis:
|
|
name: "x"
|
|
y_axis:
|
|
name: "y"
|
|
z_axis:
|
|
name: "z"
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
|
|
- **x_axis** (*Optional*): The information for the x-axis.
|
|
|
|
- **resolution** (*Optional*, int): Set resolution. Defaults to ``19BIT``. Must be one of:
|
|
|
|
- ``16BIT``
|
|
- ``17BIT``
|
|
- ``18BIT``
|
|
- ``19BIT``
|
|
|
|
- All other options from :ref:`Sensor <config-sensor>`.
|
|
|
|
- **y_axis** (*Optional*): The information for the y-axis.
|
|
|
|
- **resolution** (*Optional*, int): Set resolution. Defaults to ``19BIT``. Must be one of:
|
|
|
|
- ``16BIT``
|
|
- ``17BIT``
|
|
- ``18BIT``
|
|
- ``19BIT``
|
|
|
|
- All other options from :ref:`Sensor <config-sensor>`.
|
|
|
|
- **z_axis** (*Optional*): The information for the z-axis.
|
|
|
|
- **resolution** (*Optional*, int): Set resolution. Defaults to ``16BIT``. Must be one of:
|
|
|
|
- ``16BIT``
|
|
- ``17BIT``
|
|
- ``18BIT``
|
|
- ``19BIT``
|
|
|
|
- All other options from :ref:`Sensor <config-sensor>`.
|
|
|
|
- **temperature** (*Optional*): Built-in temperature sensor.
|
|
|
|
- **oversampling** (*Optional*, int): On-chip oversampling for the temperature sensor. Defaults to ``0``. Must be between ``0`` and ``3``.
|
|
- All other options from :ref:`Sensor <config-sensor>`.
|
|
|
|
- **drdy_pin** (*Optional*, :ref:`Pin Schema <config-pin_schema>`): Data-ready pin. Often labelled ``INT``. Using this pin might lead to slightly quicker read times.
|
|
|
|
- **gain** (*Optional*, int): Specify the gain. Defaults to ``2_5X``. Must be one of
|
|
|
|
- ``1X``
|
|
- ``1_33X``
|
|
- ``1_67X``
|
|
- ``2X``
|
|
- ``2_5X``
|
|
- ``3X``
|
|
- ``4X``
|
|
- ``5X``
|
|
|
|
- **oversampling** (*Optional*, int): On-chip oversampling. Defaults to ``2``. Must be between ``0`` and ``3``.
|
|
|
|
- **filter** (*Optional*, int): On-chip digital filter. Defaults to ``6``. Must be between ``0`` and ``7``.
|
|
|
|
- **update_interval** (*Optional*, :ref:`config-time`): The interval to check the
|
|
sensor. Defaults to ``60s``.
|
|
|
|
- **address** (*Optional*, int): Manually specify the I²C address of
|
|
the sensor. Defaults to ``0x0C``.
|
|
|
|
- **i2c_id** (*Optional*, :ref:`config-id`): Manually specify the ID of the :ref:`I²C Component <i2c>` if you want
|
|
to use multiple I²C buses.
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :ref:`sensor-filters`
|
|
- `arduino-MLX90393 <https://github.com/functionpointer/arduino-MLX90393>`__
|
|
- :ghedit:`Edit`
|