60 lines
1.9 KiB
ReStructuredText
60 lines
1.9 KiB
ReStructuredText
.. _mmc5983:
|
|
|
|
MMC5983 Magnetometer
|
|
====================
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up MMC5983 magnetometer.
|
|
:image: mmc5983.jpg
|
|
:keywords: MMC5983
|
|
|
|
The ``mmc5983`` component allows you to use your MMC5983 triple-axis magnetometer (`datasheet`_, `SparkFun`_) with ESPHome.
|
|
|
|
The :ref:`I²C Bus <i2c>` is required to be set up for this sensor to work. The device supports 400kHz
|
|
operation, so you may specify up to ``frequency: 400kHz`` in your ``i2c`` configuration.
|
|
|
|
.. figure:: ../../images/mmc5983.jpg
|
|
:align: center
|
|
:width: 30.0%
|
|
|
|
MMC5983 Magnetometer.
|
|
|
|
.. _datasheet: https://www.memsic.com/Public/Uploads/uploadfile/files/20220119/MMC5983MADatasheetRevA.pdf
|
|
.. _SparkFun: https://www.sparkfun.com/products/19921
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
sensor:
|
|
- platform: mmc5983
|
|
field_strength_x:
|
|
name: "Field X"
|
|
field_strength_y:
|
|
id: "field_y"
|
|
internal: true
|
|
field_strength_z:
|
|
name: "Field Z"
|
|
filters:
|
|
- throttle: 120s
|
|
update_interval: 60s
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
|
|
- **field_strength_x** (*Optional*): The information for the X-axis field sensor. All options from
|
|
:ref:`Sensor <config-sensor>`.
|
|
- **field_strength_y** (*Optional*): The information for the Y-axis field sensor. All options from
|
|
:ref:`Sensor <config-sensor>`.
|
|
- **field_strength_z** (*Optional*): The information for the Z-axis field sensor. All options from
|
|
:ref:`Sensor <config-sensor>`.
|
|
- **update_interval** (*Optional*, :ref:`config-time`): The interval to check the sensor. Defaults to ``60s``.
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :ref:`sensor-filters`
|
|
- :doc:`mmc5603`
|
|
- :apiref:`mmc5983/mmc5983.h`
|
|
- `SparkFun MMC5983MA Magnetometer Arduino Library <https://github.com/sparkfun/SparkFun_MMC5983MA_Magnetometer_Arduino_Library>`__
|
|
- :ghedit:`Edit`
|