64 lines
1.7 KiB
ReStructuredText
64 lines
1.7 KiB
ReStructuredText
MS5611 Atmospheric Pressure Sensor
|
|
==================================
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up MS5611 atmospheric pressure sensors.
|
|
:image: ms5611.jpg
|
|
:keywords: MS5611
|
|
|
|
The ``ms5611`` sensor platform allows you to use your MS5611 atmospheric pressure sensors
|
|
(`hobbytronics`_) temperature and pressure sensors with ESPHome. The :ref:`I²C <i2c>` is
|
|
required to be set up in your configuration for this sensor to work.
|
|
|
|
.. figure:: images/ms5611-full.jpg
|
|
:align: center
|
|
:width: 50.0%
|
|
|
|
MS5611 Atmospheric Pressure Sensor
|
|
|
|
.. _hobbytronics: http://www.hobbytronics.co.uk/ms5611-altitude-sensor
|
|
|
|
.. figure:: images/ms5611-ui.png
|
|
:align: center
|
|
:width: 80.0%
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
sensor:
|
|
- platform: ms5611
|
|
temperature:
|
|
name: "Outside Temperature"
|
|
pressure:
|
|
name: "Outside Pressure"
|
|
address: 0x77
|
|
update_interval: 60s
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
|
|
- **pressure** (**Required**): The information for the pressure sensor.
|
|
|
|
- All options from :ref:`Sensor <config-sensor>`.
|
|
|
|
- **temperature** (**Required**): The information for the temperature.
|
|
sensor
|
|
|
|
- All options from :ref:`Sensor <config-sensor>`.
|
|
|
|
- **address** (*Optional*, int): Manually specify the I²C address of
|
|
the sensor. Defaults to ``0x77``.
|
|
- **update_interval** (*Optional*, :ref:`config-time`): The interval to check the
|
|
sensor. Defaults to ``60s``.
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :ref:`sensor-filters`
|
|
- :doc:`bmp280`
|
|
- :doc:`bme280`
|
|
- :doc:`bmp085`
|
|
- `Arduino MS5611 Library <https://github.com/jarzebski/Arduino-MS5611>`__ by `Korneliusz Jarzębski <https://github.com/jarzebski>`__
|
|
- :apiref:`ms5611/ms5611.h`
|
|
- :ghedit:`Edit`
|