esphome-docs/components/switch/factory_reset.rst

50 lines
1.8 KiB
ReStructuredText

Factory Reset Switch
====================
.. seo::
:description: Instructions for setting up switches that can remotely invalidate all ESPHome preferences stored in flash and reboot ESP.
:image: restart.svg
The ``factory_reset`` switch allows you to remotely invalidate (reset) all ESPHome :ref:`preferences <preferences-flash_write_interval>` stored in flash memory and reboot your node.
After reboot all states, parameters and variables will be reinitialized with their default values. This is useful:
- for devices preflashed with ESPHome to reset behavior back to factory state
- in case of moving a device to a new environment or starting a new use-case (e.g. reset counters or state)
- for privacy concerns when giving away a device
.. note::
**USE WITH GREAT CAUTION!** All credentials, global variables, counters and saved states stored in non-volatile memory will be lost with no chance of recovering them.
Even raw reading of flash memory with ``esptool`` will not help, since data is physically erased from flash memory.
For devices configured using :doc:`captive portal </components/captive_portal>`, this will reset WiFi settings as well, thus making such devices offline.
You'll need to be in close proximity to your device to configure it again using a built-in WiFi access point and captive portal.
.. figure:: images/factory-rst-ui.png
:align: center
:width: 80.0%
.. code-block:: yaml
# Example configuration entry
switch:
- platform: factory_reset
name: Restart with Factory Default Settings
Configuration variables:
------------------------
- All options from :ref:`Switch <config-switch>`.
See Also
--------
- :doc:`shutdown`
- :doc:`restart`
- :doc:`safe_mode`
- :doc:`/components/button/factory_reset`
- :doc:`template`
- :apiref:`factory_reset/factory_reset_switch.h`
- :ghedit:`Edit`