81 lines
2.5 KiB
ReStructuredText
81 lines
2.5 KiB
ReStructuredText
Wiegand keypad and tag reader
|
|
=============================
|
|
|
|
.. seo::
|
|
:description: Wiegand-standard key input and card/tag reader panel
|
|
:image: wiegand.jpg
|
|
|
|
The ``wiegand`` component allows you to integrate Wiegand-standard key
|
|
input and card or tag reader panels in Home Assistant.
|
|
|
|
.. figure:: ../images/wiegand.jpg
|
|
:align: center
|
|
|
|
S20-ID keypad and tag reader
|
|
|
|
|
|
.. note::
|
|
|
|
Some keypads are preconfigured by the factory to act as Wiegand input
|
|
devices. In order to work with this component, they may need to
|
|
be reconfigured to act as *Wiegand 26 output* or *Wiegand 34 output*
|
|
devices.
|
|
|
|
|
|
Component
|
|
---------
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
wiegand:
|
|
- id: mykeypad
|
|
d0: GPIOXX
|
|
d1: GPIOXX
|
|
on_key:
|
|
- lambda: ESP_LOGI("KEY", "received key %d", x);
|
|
on_tag:
|
|
- lambda: ESP_LOGI("TAG", "received tag %s", x.c_str());
|
|
on_raw:
|
|
- lambda: ESP_LOGI("RAW", "received raw %d bits, value %llx", bits, value);
|
|
|
|
|
|
|
|
Configuration variables:
|
|
|
|
- **id** (*Optional*, :ref:`config-id`): Set the ID of this device for use in lambdas.
|
|
- **d0** (**Required**, :ref:`Pin Schema <config-pin_schema>`): The pin where the ``D0`` output
|
|
of the Wiegand's interface connects.
|
|
- **d1** (**Required**, :ref:`Pin Schema <config-pin_schema>`): The pin where the ``D1`` output
|
|
of the Wiegand's interface connects.
|
|
|
|
|
|
Automations:
|
|
------------
|
|
|
|
- **on_key** (*Optional*, :ref:`Automation <automation>`): An automation to perform
|
|
when a key has been pressed on the pad. The key is in a variable called ``x``.
|
|
- **on_tag** (*Optional*, :ref:`Automation <automation>`): An automation to perform
|
|
when a Wiegand-compatible card or a tag has been read by the device. The tag code is
|
|
in a variable called ``x``.
|
|
- **on_raw** (*Optional*, :ref:`Automation <automation>`): An automation to perform
|
|
for any data sent by the device. The value is in a variable called ``value``, the number of
|
|
bits is in a variable called ``bits``. Note that this will include parity bits as well and
|
|
no parity checking is done.
|
|
|
|
|
|
.. note::
|
|
|
|
Automatic handling of multiple keys (e.g. PIN code entry) is possible with the
|
|
the :ref:`Key Collector <key_collector>` component.
|
|
|
|
Keys 10 and 11 are ``*`` and ``#``. They might be labelled as ``ENT`` or ``ESC``,
|
|
but check the logs to see which key code you get and use the corresponding character.
|
|
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :doc:`/components/key_collector`
|
|
- :ghedit:`Edit`
|