272 lines
12 KiB
XML
272 lines
12 KiB
XML
<?xml version="1.0" encoding="utf-8"?>
|
|
|
|
<Product xmlns='http://code.google.com/p/open-zwave/'>
|
|
<!--
|
|
Fibaro Smart Implant
|
|
https://www.fibaro.com/us/products/smart-implant/
|
|
https://manuals.fibaro.com/content/manuals/en/FGBS-222/FGBS-222-EN-T-v1.0.pdf
|
|
https://products.z-wavealliance.org/products/3195
|
|
-->
|
|
<!-- Configuration -->
|
|
<CommandClass id="112">
|
|
<Value type="list" genre="config" instance="1" index="20" label="Input 1 operating mode" value="2" size="1">
|
|
<Help>
|
|
This parameter allows to choose mode of 1st input (IN1).
|
|
Change it depending on connected device.
|
|
</Help>
|
|
<Item label="Normally closed alarm input" value="0" />
|
|
<Item label="Normally open alarm input" value="1" />
|
|
<Item label="Monostable button" value="2" />
|
|
<Item label="Bistable button" value="3" />
|
|
<Item label="Analog input without internal pull-up" value="4" />
|
|
<Item label="Analog input with internal pullup" value="5" />
|
|
</Value>
|
|
|
|
<Value type="list" genre="config" instance="1" index="21" label="Input 2 operating mode" value="2" size="1">
|
|
<Help>
|
|
This parameter allows to choose mode of 2nd input (IN2).
|
|
Change it depending on connected device.
|
|
</Help>
|
|
<Item label="Normally closed alarm input" value="0" />
|
|
<Item label="Normally open alarm input" value="1" />
|
|
<Item label="Monostable button" value="2" />
|
|
<Item label="Bistable button" value="3" />
|
|
<Item label="Analog input without internal pull-up" value="4" />
|
|
<Item label="Analog input with internal pullup" value="5" />
|
|
</Value>
|
|
|
|
<Value type="list" genre="config" instance="1" index="24" label="Inputs orientation" value="0" size="1">
|
|
<Help>
|
|
This parameter allows reversing operation of IN1 and IN2 inputs without changing the wiring.
|
|
Use in case of incorrect wiring.
|
|
</Help>
|
|
<Item label="Default (IN1 - 1st input, IN2 - 2nd input)" value="0" />
|
|
<Item label="Reversed (IN1 - 2nd input, IN2 - 1st input)" value="1" />
|
|
</Value>
|
|
|
|
<Value type="list" genre="config" instance="1" index="25" label="Outputs orientation" value="0" size="1">
|
|
<Help>
|
|
This parameter allows reversing operation of OUT1 and OUT2 inputs without changing the wiring.
|
|
Use in case of incorrect wiring.
|
|
</Help>
|
|
<Item label="Default (OUT1 - 1st output, OUT2 - 2nd output)" value="0" />
|
|
<Item label="Reversed (OUT1 - 2nd output, OUT2 - 1st output)" value="1" />
|
|
</Value>
|
|
|
|
<Value type="byte" genre="config" instance="1" index="40" label="Input 1 sent scenes" value="0" size="1">
|
|
<Help>
|
|
This parameter defines which actions result in sending scene ID and attribute assigned to them.
|
|
Parameter is relevant only if parameter 20 is set to 2 or 3. bitmask.
|
|
0 => No scenes sent.
|
|
1 => Key pressed 1 time.
|
|
2 => Key pressed 2 times.
|
|
4 => Key pressed 3 times.
|
|
8 => Key hold down and key released.
|
|
</Help>
|
|
</Value>
|
|
|
|
<Value type="byte" genre="config" instance="1" index="41" label="Input 2 sent scenes" value="0" size="1">
|
|
<Help>
|
|
This parameter defines which actions result in sending scene ID and attribute assigned to them.
|
|
Parameter is relevant only if parameter 21 is set to 2 or 3. bitmask.
|
|
0 => No scenes sent.
|
|
1 => Key pressed 1 time.
|
|
2 => Key pressed 2 times.
|
|
4 => Key pressed 3 times.
|
|
8 => Key hold down and key released.
|
|
</Help>
|
|
</Value>
|
|
|
|
<Value type="short" genre="config" instance="1" index="47" label="Input 1 value sent to 2nd association group when activated" min="0" max="255" value="255">
|
|
<Help>
|
|
This parameter defines value sent to devices in 2nd association group when IN1 input is triggered (using Basic Command Class).
|
|
Available settings: 0-255.
|
|
Default setting: 255.
|
|
</Help>
|
|
</Value>
|
|
|
|
<Value type="short" genre="config" instance="1" index="49" label="Input 1 value sent to 2nd association group when deactivated" min="0" max="255" value="255">
|
|
<Help>
|
|
This parameter defines value sent to devices in 2nd association group when IN1 input is deactivated (using Basic Command Class).
|
|
Available settings: 0-255.
|
|
Default setting: 255.
|
|
</Help>
|
|
</Value>
|
|
|
|
<Value type="short" genre="config" instance="1" index="52" label="Input 2 value sent to 3rd association group when activated" min="0" max="255" value="255">
|
|
<Help>
|
|
This parameter defines value sent to devices in 3rd association group when IN2 input is triggered (using Basic Command Class).
|
|
Available settings: 0-255.
|
|
Default setting: 255.
|
|
</Help>
|
|
</Value>
|
|
|
|
<Value type="short" genre="config" instance="1" index="54" label="Input 2 value sent to 3rd association group when deactivated" min="0" max="255" value="255">
|
|
<Help>
|
|
This parameter defines value sent to devices in 3rd association group when IN2 input is deactivated (using Basic Command Class).
|
|
Available settings: 0-255.
|
|
Default setting: 255.
|
|
</Help>
|
|
</Value>
|
|
|
|
<Value type="byte" genre="config" instance="1" index="150" label="Input 1 sensitivity" min="1" max="100" units="10ms" value="10">
|
|
<Help>
|
|
This parameter defines the inertia time of IN1 input in alarm modes.
|
|
Adjust this parameter to prevent bouncing or signal disruptions.
|
|
Parameter is relevant only if parameter 20 is set to 0 or 1 (alarm mode).
|
|
Available settings: 1-100 (10ms-1000ms, 10ms step).
|
|
Default setting: 10 (100ms).
|
|
</Help>
|
|
</Value>
|
|
|
|
<Value type="byte" genre="config" instance="1" index="151" label="Input 2 sensitivity" min="1" max="100" units="10ms" value="10">
|
|
<Help>
|
|
This parameter defines the inertia time of IN2 input in alarm modes.
|
|
Adjust this parameter to prevent bouncing or signal disruptions. Parameter is relevant only if parameter 21 is set to 0 or 1 (alarm mode).
|
|
Available settings: 1-100 (10ms-1000ms, 10ms step).
|
|
Default setting: 10 (100ms).
|
|
</Help>
|
|
</Value>
|
|
|
|
<Value type="short" genre="config" instance="1" index="152" label="Input 1 delay of alarm cancellation" min="0" max="3600" units="seconds" value="0">
|
|
<Help>
|
|
This parameter defines additional delay of cancelling the alarm on IN1 input.
|
|
Parameter is relevant only if parameter 20 is set to 0 or 1 (alarm mode).
|
|
Available settings:
|
|
0 - no delay.
|
|
1-3600s.
|
|
Default setting: 0 (no delay).
|
|
</Help>
|
|
</Value>
|
|
|
|
<Value type="short" genre="config" instance="1" index="153" label="Input 2 delay of alarm cancellation" min="0" max="3600" units="seconds" value="0">
|
|
<Help>
|
|
This parameter defines additional delay of cancelling the alarm on IN2 input.
|
|
Parameter is relevant only if parameter 21 is set to 0 or 1 (alarm mode).
|
|
Available settings:
|
|
0 - no delay.
|
|
1-3600s.
|
|
Default setting: 0 (no delay).
|
|
</Help>
|
|
</Value>
|
|
|
|
<Value type="list" genre="config" instance="1" index="154" label="Output 1 logic of operation" value="0" size="1">
|
|
<Help>This parameter defines logic of OUT1 output operation.</Help>
|
|
<Item label="contacts normally open" value="0" />
|
|
<Item label="contacts normally closed" value="1" />
|
|
</Value>
|
|
|
|
<Value type="list" genre="config" instance="1" index="155" label="Output 2 logic of operation" value="0" size="1">
|
|
<Help>This parameter defines logic of OUT2 output operation.</Help>
|
|
<Item label="contacts normally open" value="0" />
|
|
<Item label="contacts normally closed" value="1" />
|
|
</Value>
|
|
|
|
<Value type="short" genre="config" instance="1" index="156" label="Output 1 auto off" min="0" max="27000" units="0.1s" value="0">
|
|
<Help>
|
|
This parameter defines time after which OUT1 will be automatically deactivated.
|
|
Available settings:
|
|
0 - auto off disabled.
|
|
1-27000 (0.1s-45min, 0.1s step).
|
|
Default setting: 0 (auto off disabled).
|
|
</Help>
|
|
</Value>
|
|
|
|
<Value type="short" genre="config" instance="1" index="157" label="Output 2 auto off" min="0" max="27000" units="0.1s" value="0">
|
|
<Help>
|
|
This parameter defines time after which OUT2 will be automatically deactivated.
|
|
Available settings:
|
|
0 - auto off disabled.
|
|
1-27000 (0.1s-45min, 0.1s step).
|
|
Default setting: 0 (auto off disabled).
|
|
</Help>
|
|
</Value>
|
|
|
|
<Value type="byte" genre="config" instance="1" index="63" label="Analog inputs minimal change to report" min="0" max="100" units="0.1v" value="5">
|
|
<Help>
|
|
This parameter defines minimal change (from the last reported) of
|
|
analog input value that results in sending new report. Parameter is
|
|
relevant only for analog inputs (parameter 20 or 21 set to 4 or 5).
|
|
Available settings:
|
|
0 - (reporting on change disabled).
|
|
1-100 (0.1-10V, 0.1V step).
|
|
Default setting: 5 (0.5V).
|
|
</Help>
|
|
</Value>
|
|
|
|
<Value type="short" genre="config" instance="1" index="64" label="Analog inputs periodical reports" min="0" max="32400" units="seconds" value="0">
|
|
<Help>
|
|
This parameter defines reporting period of analog inputs value.
|
|
Periodical reports are independent from changes in value (parameter 63). Parameter is relevant only for analog inputs (parameter
|
|
20 or 21 set to 4 or 5).
|
|
Available settings:
|
|
0 (periodical reports disabled).
|
|
60-32400 (60s-9h).
|
|
Default setting: 0 (periodical reports disabled).
|
|
</Help>
|
|
</Value>
|
|
|
|
<Value type="short" genre="config" instance="1" index="65" label="Internal temperature sensor minimal change to report" min="0" max="255" value="5">
|
|
<Help>
|
|
This parameter defines minimal change (from the last reported)
|
|
of internal temperature sensor value that results in sending new
|
|
report.
|
|
Available settings:
|
|
0 - (reporting on change disabled).
|
|
1-255 (0.1-25.5C).
|
|
Default setting: 5 (0.5C).
|
|
</Help>
|
|
</Value>
|
|
|
|
<Value type="short" genre="config" instance="1" index="66" label="Internal temperature sensor periodical reports" min="0" max="32400" units="seconds" value="0">
|
|
<Help>
|
|
This parameter defines reporting period of internal temperature
|
|
sensor value. Periodical reports are independent from changes in
|
|
value (parameter 65).
|
|
Available settings:
|
|
0 (periodical reports disabled).
|
|
60-32400 (60s-9h).
|
|
Default setting: 0 (periodical reports disabled).
|
|
</Help>
|
|
</Value>
|
|
|
|
<Value type="short" genre="config" instance="1" index="67" label="External sensors minimal change to report" min="0" max="255" value="5">
|
|
<Help>
|
|
This parameter defines minimal change (from the last reported) of
|
|
external sensors values (DS18B20 or DHT22) that results in sending new
|
|
report. Parameter is relevant only for connected DS18B20 or DHT22
|
|
sensors.
|
|
Available settings:
|
|
0 - (reporting on change disabled).
|
|
1-255 (0.1-25.5 units).
|
|
Default setting: 5 (0.5 units)
|
|
</Help>
|
|
</Value>
|
|
|
|
<Value type="short" genre="config" instance="1" index="68" label="External sensors periodical reports" min="0" max="32400" units="seconds" value="0">
|
|
<Help>
|
|
This parameter defines reporting period of analog inputs value.
|
|
Periodical reports are independent from changes in value (parameter 67).
|
|
Parameter is relevant only for connected DS18B20 or DHT22 sensors.
|
|
Available settings:
|
|
0 - (periodical reports disabled).
|
|
60-32400 (60s-9h).
|
|
Default setting: 0 (periodical reports disabled).
|
|
</Help>
|
|
</Value>
|
|
</CommandClass>
|
|
|
|
<CommandClass id="96" mapping="endpoints" />
|
|
<CommandClass id="32" setasreport="true" />
|
|
|
|
<!-- Association Groups -->
|
|
<CommandClass id="133">
|
|
<Associations num_groups="3">
|
|
<Group index="1" max_associations="1" label="Lifeline" />
|
|
<Group index="2" max_associations="5" label="Input IN1" />
|
|
<Group index="3" max_associations="5" label="Input IN2" />
|
|
</Associations>
|
|
</CommandClass>
|
|
|
|
</Product>
|