181 lines
10 KiB
XML
181 lines
10 KiB
XML
<?xml version="1.0" encoding="utf-8"?>
|
|
<!-- Fibaro: FGK101 Door Opening Sensor -->
|
|
<Product xmlns='http://code.google.com/p/open-zwave/'>
|
|
|
|
<!-- Configuration -->
|
|
<CommandClass id="112">
|
|
<Value type="list" size="1" genre="config" instance="1" index="1" label="Operation Mode" value="0">
|
|
<Help>Parameter defines device operation mode.</Help>
|
|
<Item label="Door/Window Sensor or external alarm sensor" value="0" />
|
|
<Item label="External switch" value="1" />
|
|
</Value>
|
|
|
|
<Value type="list" genre="config" instance="1" index="2" label="DOOR/WINDOW/ALARM" value="1" size="1">
|
|
<Help>Parameter defines state of the sensor when the magnet is close.
|
|
If you connect the alarm sensor, it determines the output type.
|
|
Parameter inactive in Switch Mode (parameter 1 set to 1).</Help>
|
|
<Item label="Closed" value="0" />
|
|
<Item label="Opened" value="1" />
|
|
</Value>
|
|
|
|
<Value type="byte" genre="config" instance="1" index="3" label="Visual LED indications" value="6" min="1" max="7" size="1">
|
|
<Help>This parameter defines events indicated by the visual LED indicator.
|
|
Disabling events might extend battery life.
|
|
0 - no indications
|
|
1 - indication of opening/closing status change (input IN)
|
|
2 - indication of wake up (1 x click or periodical)
|
|
4 - indication of device tampering
|
|
</Help>
|
|
</Value>
|
|
<Value type="list" genre="config" instance="1" index="4" label="Range test after double click" min="0" max="1" value="0" size="1">
|
|
<Help>Parameter defines state of the sensor when the magnet is close.
|
|
If you connect the alarm sensor, it determines the output type.
|
|
Parameter inactive in Switch Mode (parameter 1 set to 1).</Help>
|
|
<Item label="Disabled" value="0" />
|
|
<Item label="Enabled" value="1" />
|
|
</Value>
|
|
<Value type="list" genre="config" instance="1" index="10" label="2nd association group triggers" value="0" size="1">
|
|
<Help>Parameter defines events which result in sending on/off commands to devices added to the 2nd association group.
|
|
These commands are sent alternately to switch the devices on and off.
|
|
Commands represent the values of BASIC SET command frames.
|
|
Parameter is inactive in external button mode (parameter 1 set to 1). </Help>
|
|
<Item label="Switch after opening and closing" value="0" />
|
|
<Item label="Switch after opening" value="1" />
|
|
<Item label="Switch after closing" value="2" />
|
|
</Value>
|
|
<Value type="list" genre="config" instance="1" index="11" label="Commands sent to 2nd association group" value="0" size="1">
|
|
<Help>Command frames sent to devices added to the 2nd association group. </Help>
|
|
<Item label="ON" value="0" />
|
|
<Item label="OFF" value="1" />
|
|
<Item label="ON and OFF" value="2" />
|
|
</Value>
|
|
<Value type="short" genre="config" instance="1" index="12" label="Value of ON command frame sent to 2nd association group" value="255" min="0" max="255" size="2">
|
|
<Help>The value of 0 turns OFF the device, 255 turns it ON.
|
|
In case of associating the Dimmer or Roller Shutter module, values 1-99 allow to set an associated device to a specified level.
|
|
</Help>
|
|
</Value>
|
|
<Value type="short" genre="config" instance="1" index="13" label="Value of OFF command frame sent to 2nd association group" value="0" min="0" max="255" size="2">
|
|
<Help>The value of 0 turns OFF the device, 255 turns it ON.
|
|
In case of associating the Dimmer or Roller Shutter module, values 1-99 allow to set an associated device to a specified level.
|
|
</Help>
|
|
</Value>
|
|
<Value type="short" genre="config" instance="1" index="14" label="Time delay of ON command frame" value="0" min="0" max="32400" size="2" units="seconds">
|
|
<Help>Time period after which ON command frame will be sent.
|
|
</Help>
|
|
</Value>
|
|
<Value type="short" genre="config" instance="1" index="15" label="Time delay of OFF command frame" value="0" min="0" max="32400" size="2" units="seconds">
|
|
<Help>Time period after which OFF command frame will be sent.
|
|
</Help>
|
|
</Value>
|
|
<Value type="list" genre="config" instance="1" index="20" label="Type of sent alarm frames" min="0" max="5" value="0" size="1">
|
|
<Help>Type of control frames transmitted to the main controller and 3rd association group Alarm.
|
|
If an external sensor is connected to IN input, it is possible to choose its functionality.
|
|
Otherwise it is recommended to set this parameter to default value.</Help>
|
|
<Item label="Door/Window Sensor (General Purpose Alarm)" value="0" />
|
|
<Item label="Smoke sensor (Smoke Alarm)" value="1" />
|
|
<Item label="CO detector (CO Alarm)" value="2" />
|
|
<Item label="CO2 detector (CO2 Alarm)" value="3" />
|
|
<Item label="High temperature sensor (Heat Alarm)" value="4" />
|
|
<Item label="Flood sensor (Water Alarm)" value="5" />
|
|
</Value>
|
|
|
|
<Value type="short" genre="config" instance="1" index="30" label="Delay of tamper alarm cancellation" value="5" min="0" max="32400" size="2" units="seconds">
|
|
<Help>Time period after which a tamper alarm will be cancelled.
|
|
</Help>
|
|
</Value>
|
|
<Value type="list" genre="config" instance="1" index="31" label="Reporting tamper alarm cancellation" min="0" max="1" value="0" size="1">
|
|
<Help>Reporting cancellation of tamper alarm to the controller and 5th association group.</Help>
|
|
<Item label="Do not send tamper cancellation report" value="0" />
|
|
<Item label="Send tamper cancellation report" value="1" />
|
|
</Value>
|
|
<Value type="short" genre="config" instance="1" index="50" label="Interval of temperature measurements" value="300" min="0" max="32400" size="2" units="seconds">
|
|
<Help>This parameter defines how often the temperature will be measured.
|
|
The shorter the time, the more frequently the temperature will be measured, but the battery life will shorten.
|
|
0 - temperature measurements disabled
|
|
5-32400 - time in seconds
|
|
</Help>
|
|
</Value>
|
|
<Value type="short" genre="config" instance="1" index="51" label="Temperature reports threshold" value="10" min="0" max="300" size="2">
|
|
<Help>This parameter defines the change of temperature in comparison with last reported, resulting in temperature report being sent to the main controller.
|
|
0 - temperature reports based on threshold disabled
|
|
1-300 - temperature threshold (0.1-30C, 0.1C step)
|
|
</Help>
|
|
</Value>
|
|
<Value type="short" genre="config" instance="1" index="52" label="Interval of temperature reports" value="0" min="0" max="32400" size="2" units="seconds">
|
|
<Help>This parameter determines how often the temperature reports will be sent to the main controller.
|
|
0 - periodic temperature reports disabled
|
|
5-32400 - time in seconds
|
|
</Help>
|
|
</Value>
|
|
<Value type="int" genre="config" instance="1" index="53" label="Temperature offset" value="0" min="-1000" max="1000" size="4">
|
|
<Help>The value to be added to the actual temperature, measured by the sensor (temperature compensation). (0,1C steps)
|
|
</Help>
|
|
</Value>
|
|
<Value type="list" genre="config" instance="1" index="54" label="Temperature alarm reports" value="0" size="1">
|
|
<Help>Temperature alarms reported to the Z-Wave controller.
|
|
Thresholds are set in parameters 55 and 56.</Help>
|
|
<Item label="Temperature alarms disabled" value="0" />
|
|
<Item label="High temperature alarm" value="1" />
|
|
<Item label="Low temperature alarm" value="2" />
|
|
<Item label="High and low temperature alarms" value="3" />
|
|
</Value>
|
|
<Value type="short" genre="config" instance="1" index="55" label="High temperature alarm threshold" value="540" min="0" max="1000" size="2">
|
|
<Help>If temperature is higher than set value, overheat notification will be sent and high temperature scene will be triggered (if activated).
|
|
0-1000 (0-100C, 0.1C step).
|
|
</Help>
|
|
</Value>
|
|
<Value type="short" genre="config" instance="1" index="56" label="Low temperature alarm threshold" value="40" min="-300" max="700" size="2">
|
|
<Help>If temperature is lower than the set value, underheat notification will be sent and low temperature scene will be triggered (if activated).
|
|
300-700 (-30-70C, 0.1C step)
|
|
</Help>
|
|
</Value>
|
|
<Value type="short" genre="config" instance="1" index="70" label="Scene activation functionality" value="0" min="0" max="3903" size="2">
|
|
<Help>The device can trigger scenes using scene IDs assigned to different events.
|
|
To deactivate all scenes set the value to 0.
|
|
To activate all scenes set the value to 3903.
|
|
1 - [ID 10] opening door/window (single click).
|
|
2 - [ID 11] closing door/window (single click).
|
|
4 - [ID 12] holding.
|
|
8 - [ID 13] releasing.
|
|
16 - [ID 14] double click.
|
|
32 - [ID 15] triple click.
|
|
256 - [ID 50] high temperature - door/window opened.
|
|
512 - [ID 50] high temperature - door/window closed.
|
|
1024 - [ID 51] low temperature - door/window opened.
|
|
2048 - [ID 51] low temperature - door/window closed.
|
|
</Help>
|
|
</Value>
|
|
<Value type="byte" genre="config" instance="1" index="71" label="Alarm broadcast" value="0" min="0" max="7" size="1">
|
|
<Help>Settings for broadcasting ON/OFF commands, sensor alarm and tamper alarm.
|
|
Value other than 0 means alarms are sent in Broadcast Mode, to all devices only within the range of the device.
|
|
They are not repeated by the mesh network.
|
|
0 - broadcasts inactive.
|
|
1 - ON/OFF commands broadcast active.
|
|
2 - sensor alarm broadcast active.
|
|
4 - tamper alarm broadcast active.
|
|
</Help>
|
|
</Value>
|
|
<Value type="byte" genre="config" instance="1" index="72" label="Associations in Z-Wave network Security Mode" value="15" min="0" max="15" size="1">
|
|
<Help>This parameter defines how commands are sent in specified association groups: as secure or non-secure.
|
|
Parameter is active only in Z-Wave network security mode. It does not apply to 1st group Lifeline
|
|
0 - none of the groups sent as secure.
|
|
1 - 2nd group Control sent as secure.
|
|
2 - 3rd group Alarm sent as secure.
|
|
4 - 4th group Sensor ZW3 sent as secure.
|
|
8 - 5th group Tamper ZW3 sent as secure.
|
|
</Help>
|
|
</Value>
|
|
</CommandClass>
|
|
|
|
<!-- Association Groups -->
|
|
<CommandClass id="133">
|
|
<Associations num_groups="5">
|
|
<Group index="1" max_associations="1" label="Lifeline"/>
|
|
<Group index="2" max_associations="5" label="Control BASIC SET reports" />
|
|
<Group index="3" max_associations="5" label="Alarm reports"/>
|
|
<Group index="4" max_associations="5" label="Sensor ZW3 BASIC SET reports" auto="true"/>
|
|
<Group index="5" max_associations="5" label="Tamper ZW3 tamper alarm"/>
|
|
</Associations>
|
|
</CommandClass>
|
|
</Product>
|