344 lines
16 KiB
XML
344 lines
16 KiB
XML
<?xml version="1.0" encoding="utf-8"?>
|
|
|
|
<Product xmlns='http://code.google.com/p/open-zwave/'>
|
|
<!--
|
|
Fibaro Motion Sensor FGMS-001
|
|
http://www.fibaro.com/manuals/en/Motion-Sensor/Motion-Sensor_EN_5.3.14.pdf
|
|
-->
|
|
<!-- Configuration -->
|
|
<CommandClass id="112">
|
|
<Value type="byte" genre="config" instance="1" index="1" label="Motion sensor's sensitivity" min="0" max="255" value="10">
|
|
<Help>
|
|
The lower the value, the more sensitive the PIR sensor.
|
|
Available settings: 8 - 255
|
|
Default setting: 10
|
|
</Help>
|
|
</Value>
|
|
<Value type="byte" genre="config" instance="1" index="2" label="Motion sensor's blind time (insensitivity)" min="0" max="15" value="15">
|
|
<Help>
|
|
Period of time through which the PIR sensor is "blind" (insensitive) to
|
|
motion. After this time period the PIR sensor will be again able to
|
|
detect motion. The longer the insensitivity period, the longer the
|
|
battery life. If the sensor is required to detect motion quickly, the time
|
|
period may be shortened. The time of insensitivity should be shorter
|
|
that the time period set in parameter 6.
|
|
Available settings: 0 - 15
|
|
Formula to calculate the time: time [s] = 0.5 x (value + 1)
|
|
Default setting: 15 (8 seconds)
|
|
</Help>
|
|
</Value>
|
|
<Value type="list" genre="config" instance="1" index="3" label="PIR sensor's pulse counter" min="0" max="3" value="1" size="1">
|
|
<Help>
|
|
Sets the number of moves required for the PIR sensor to report
|
|
motion. The lower the value, the less sensitive the PIR sensor. It's
|
|
not recommended to modify this parameter settings.
|
|
Available settings: 0 - 3
|
|
Formula to calculate the number of pulses: pulses = (value + 1)
|
|
Default setting: 1 (2 pulses)
|
|
</Help>
|
|
<Item label="1 pulse" value="0" />
|
|
<Item label="2 pulses" value="1" />
|
|
<Item label="3 pulses" value="2" />
|
|
<Item label="4 pulses" value="3" />
|
|
</Value>
|
|
<Value type="list" genre="config" instance="1" index="4" label="PIR sensor's window time" min="0" max="3" value="2" size="1">
|
|
<Help>
|
|
Period of time during which the number of moves set in parameter 3
|
|
must be detected in order for the PIR sensor to report motion. The
|
|
higher the value, the more sensitive the PIR sensor. It's not
|
|
recommended to modify this parameter setting.
|
|
Available settings: 0 - 3
|
|
Formula to calculate the time: time [s] = 4 x (value + 1)
|
|
Default setting: 2 (12 seconds)
|
|
</Help>
|
|
<Item label="4 seconds" value="0" />
|
|
<Item label="8 seconds" value="1" />
|
|
<Item label="12 seconds" value="2" />
|
|
<Item label="16 seconds" value="3" />
|
|
</Value>
|
|
<Value type="short" genre="config" instance="1" index="6" label="Motion alarm cancellation delay" min="0" max="65535" value="30">
|
|
<Help>
|
|
Motion alarm will be cancelled in the main controller and the
|
|
associated devices after the period of time set in this parameter. Any
|
|
motion detected during the cancellation delay time countdown will
|
|
result in the countdown being restarted. In case of small values,
|
|
below 10 seconds, the value of parameter 2 must be modified (PIR
|
|
sensor's "Blind Time").
|
|
Available settings: 1 - 65535
|
|
Default setting: 30 (30 seconds)
|
|
</Help>
|
|
</Value>
|
|
<Value type="list" genre="config" instance="1" index="8" label="PIR sensor operating mode" min="0" max="2" value="0" size="1">
|
|
<Help>
|
|
The parameter determines the part of day in which the PIR sensor
|
|
will be active. This parameter influences only the motion reports and
|
|
associations. Tamper, light intensity and temperature measurements
|
|
will be still active, regardless of this parameter settings.
|
|
Default setting: 0 (always active)
|
|
</Help>
|
|
<Item label="PIR sensor always active" value="0" />
|
|
<Item label="PIR sensor active during the day only" value="1" />
|
|
<Item label="PIR sensor active during the night only" value="2" />
|
|
</Value>
|
|
<Value type="short" genre="config" instance="1" index="9" label="Night / day" min="0" max="65535" value="200">
|
|
<Help>
|
|
The parameter defines the difference between night and day, in
|
|
terms of light intensity, used in parameter 8.
|
|
Available settings: 1 - 65535
|
|
Default setting: 200 (200 lux)
|
|
</Help>
|
|
</Value>
|
|
<Value type="list" genre="config" instance="1" index="12" label="Basic command class frames configuration" min="0" max="2" value="0" size="1">
|
|
<Help>
|
|
The parameter determines the command frames sent in 1-st
|
|
association group, assigned to PIR sensor.
|
|
Values of BASIC ON and BASIC OFF command frames may be
|
|
modified by dedicated parameters.
|
|
Default setting: 0 (ON and OFF)
|
|
</Help>
|
|
<Item label="BASIC ON and BASIC OFF command frames sent in Basic Command Class." value="0" />
|
|
<Item label="only the BASIC ON command frame sent in Basic Command Class." value="1" />
|
|
<Item label="only the BASIC OFF command frame sent in Basic Command Class." value="2" />
|
|
</Value>
|
|
<Value type="byte" genre="config" instance="1" index="14" label="BASIC ON command frame value" min="0" max="255" value="255">
|
|
<Help>
|
|
The value of 255 allows to turn ON a device. In case of the Dimmer,
|
|
the value of 255 means turning ON at the last memorized state, e.g.
|
|
the Dimmer turned ON at 30% and turned OFF using the value of
|
|
255, and then turned OFF, will be turned ON at 30%, i.e. the last
|
|
memorized state.
|
|
Available settings: 0 - 255
|
|
Default setting: 255
|
|
</Help>
|
|
</Value>
|
|
<Value type="byte" genre="config" instance="1" index="16" label="BASIC OFF command frame value" min="0" max="255" value="0">
|
|
<Help>
|
|
The command frame sent at the moment of motion alarm
|
|
cancellation, after the cancellation delay time, specified in parameter
|
|
6, has passed.
|
|
The value of 0 allows to turn a device OFF while the value of 255
|
|
allows to turn ON a device. In case of the Dimmer, the value of 255
|
|
means turning ON at the last memorized state, e.g. the Dimmer
|
|
turned ON at 30% and turned OFF using the value of 255, and then
|
|
turned OFF, will be turned ON at 30%, i.e. the last memorized state.
|
|
Available settings: 0 - 255
|
|
Default setting: 0
|
|
</Help>
|
|
</Value>
|
|
<Value type="byte" genre="config" instance="1" index="20" label="Tamper sensitivity" min="0" max="122" value="15">
|
|
<Help>
|
|
The parameter determines the changes in forces acting on the Fibaro
|
|
Motion Sensor resulting in tamper alarm being reported - g-force
|
|
acceleration.
|
|
Available settings: 0 - 122 (0.08 - 2g; multiply by 0.016g; 0 = tamper inactive)
|
|
Default setting: 15 (0.224g)
|
|
</Help>
|
|
</Value>
|
|
<Value type="short" genre="config" instance="1" index="22" label="Tamper alarm cancellation delay" min="0" max="65535" value="30">
|
|
<Help>
|
|
Time period after which a tamper alarm will be cancelled. Another
|
|
tampering detected during the countdown to cancellation will not
|
|
extend the delay.
|
|
Available settings: 1 - 65535
|
|
Default setting: 30 (seconds)
|
|
</Help>
|
|
</Value>
|
|
<Value type="list" genre="config" instance="1" index="24" label="Tamper operating modes" min="0" max="4" value="0" size="1">
|
|
<Help>
|
|
The parameter determines the behaviour of tamper and how it
|
|
reports.
|
|
Tamper: Tamper alarm is reported in Sensor Alarm command class.
|
|
Cancellation: Cancellation is reported in Sensor Alarm command class after the time period set in parameter 22 (Tamper Alarm Cancellation Delay).
|
|
Orientation: Sensor's orientation in space is reported in Fibaro Command Class after the time period set in parameter 22.
|
|
Vibration: The maximum level of vibrations recorded in the time period set
|
|
in parameter 22 is reported. Reports stop being sent when the
|
|
vibrations cease. The reports are sent in Sensor Alarm command
|
|
class. Value displayed in the "value" field (0 - 100) depends on the
|
|
vibrations force. Reports to the association groups are sent using
|
|
Sensor Alarm command class.
|
|
Default setting: 0 (Tamper)
|
|
</Help>
|
|
<Item label="Tamper" value="0" />
|
|
<Item label="Tamper + Cancellation" value="1" />
|
|
<Item label="Tamper + Orientation" value="2" />
|
|
<Item label="Tamper + Cancellation + Orientation" value="3" />
|
|
<Item label="Vibration" value="4" />
|
|
</Value>
|
|
<Value type="list" genre="config" instance="1" index="26" label="Tamper alarm broadcast mode" min="0" max="1" value="0" size="1">
|
|
<Help>
|
|
The parameter determines whether the tamper alarm frame will or
|
|
will not be sent in broadcast mode. Alarm frames sent in broadcast
|
|
mode may be received by all of the devices within communication
|
|
range (if they accept such frames).
|
|
Default setting: 0
|
|
</Help>
|
|
<Item label="Tamper alarm is not sent in broadcast mode." value="0" />
|
|
<Item label="Tamper alarm sent in broadcast mode." value="1" />
|
|
</Value>
|
|
<Value type="short" genre="config" instance="1" index="40" label="Illumination report threshold" min="0" max="65535" value="200">
|
|
<Help>
|
|
The parameter determines the change in light intensity level
|
|
resulting in illumination report being sent to the main controller.
|
|
Available settings: 0 - 65535 (1 - 65535 lux; 0 = reports are not
|
|
sent)
|
|
Default setting: 200 (200 lux)
|
|
</Help>
|
|
</Value>
|
|
<Value type="short" genre="config" instance="1" index="42" label="Illumination reports interval" min="0" max="65535" value="0">
|
|
<Help>
|
|
Time interval between consecutive illumination reports. The reports
|
|
are sent even if there are no changes in the light intensity.
|
|
Available settings: 0 - 65535 (1 - 65535 seconds; 0 = reports are
|
|
not sent)
|
|
Default setting: 0 (no reports)
|
|
NOTE
|
|
Frequent reports will shorten the battery life.
|
|
Parameter value under 5 may result in blocking the
|
|
temperature reports.
|
|
</Help>
|
|
</Value>
|
|
<Value type="byte" genre="config" instance="1" index="60" label="Temperature report threshold" min="0" max="255" value="10">
|
|
<Help>
|
|
The parameter determines the change in level of temperature
|
|
resulting in temperature report being sent to the main controller.
|
|
Available settings: 0 - 255 (0.1 - 25.5C; 0 = reports are not sent)
|
|
Default setting: 10 (1C)
|
|
</Help>
|
|
</Value>
|
|
<Value type="short" genre="config" instance="1" index="62" label="Interval of temperature measuring" min="0" max="65535" value="900">
|
|
<Help>
|
|
The parameter determines how often the temperature will be
|
|
measured. The shorter the time, the more frequently the temperature
|
|
will be measured, but the battery life will shorten.
|
|
Available settings: 0 - 65535 (1 - 65535 seconds; 0 = temperature
|
|
will not be measured)
|
|
Default setting: 900 (900 seconds)
|
|
NOTE
|
|
Frequent reports will shorten the battery life.
|
|
Parameter value under 5 may result in blocking the
|
|
illumination reports.
|
|
</Help>
|
|
</Value>
|
|
<Value type="short" genre="config" instance="1" index="64" label="Temperature reports interval" min="0" max="65535" value="0">
|
|
<Help>
|
|
The parameter determines how often the temperature reports will be
|
|
sent to the main controller.
|
|
Available settings: 0 - 65535 (1 - 65535 seconds; 0 = reports are not
|
|
sent)
|
|
Default setting: 0
|
|
</Help>
|
|
</Value>
|
|
<Value type="short" genre="config" instance="1" index="66" label="Temperature offset" min="0" max="65535" value="0">
|
|
<Help>
|
|
The value to be added to the actual temperature, measured by the
|
|
sensor (temperature compensation).
|
|
Available settings: 0 - 100 (0 to 100C) or 64536 - 65535 (-100 to -0.10C)
|
|
Default setting: 0
|
|
</Help>
|
|
</Value>
|
|
<Value type="list" genre="config" instance="1" index="80" label="LED signaling mode" min="0" max="26" value="10" size="1">
|
|
<Help>
|
|
The parameter determines the way in which LED behaves
|
|
after motion has been detected.
|
|
Values 1 and from 3 to 9 = single long blink at the moment of reporting
|
|
motion. No other motion will be indicated until alarm is cancelled.
|
|
Values from 10 to 18 = single long blink at the moment of reporting
|
|
motion and one short blink each time the motion is detected again.
|
|
Values from 19 to 26 = single long blink at the moment of reporting
|
|
motion and two short blinks each time the motion is detected again.
|
|
Default setting: 10 (flashlight)
|
|
</Help>
|
|
<Item label="LED inactive." value="0" />
|
|
<Item label="1 long blink, LED colour depends on the temperature. Set by parameters 86 and 87." value="1" />
|
|
<Item label="Flashlight mode - LED glows in white for 10 seconds." value="2" />
|
|
<Item label="Long blink White." value="3" />
|
|
<Item label="Long blink Red." value="4" />
|
|
<Item label="Long blink Green." value="5" />
|
|
<Item label="Long blink Blue." value="6" />
|
|
<Item label="Long blink Yellow." value="7" />
|
|
<Item label="Long blink Cyan." value="8" />
|
|
<Item label="Long blink Magenta." value="9" />
|
|
<Item label="Long blink, then short blink, LED colour depends on the temperature. Set by parameters 86 and 87." value="10" />
|
|
<Item label="Flashlight mode - LED glows in white through 10 seconds. Each next detected motion extends the glowing by next 10 seconds." value="11" />
|
|
<Item label="Long blink, then short blinks White." value="12" />
|
|
<Item label="Long blink, then short blinks Red." value="13" />
|
|
<Item label="Long blink, then short blinks Green." value="14" />
|
|
<Item label="Long blink, then short blinks Blue." value="15" />
|
|
<Item label="Long blink, then short blinks Yellow." value="16" />
|
|
<Item label="Long blink, then short blinks Cyan" value="17" />
|
|
<Item label="Long blink, then short blinks Magenta" value="18" />
|
|
<Item label="Long blink, then 2 short blinks, LED colour depends on the temperature. Set by parameters 86 and 87." value="19" />
|
|
<Item label="Long blink, then 2 short blinks White" value="20" />
|
|
<Item label="Long blink, then 2 short blinks Red" value="21" />
|
|
<Item label="Long blink, then 2 short blinks Green" value="22" />
|
|
<Item label="Long blink, then 2 short blinks Blue" value="23" />
|
|
<Item label="Long blink, then 2 short blinks Yellow" value="24" />
|
|
<Item label="Long blink, then 2 short blinks Cyan" value="25" />
|
|
<Item label="Long blink, then 2 short blinks Magenta" value="26" />
|
|
</Value>
|
|
<Value type="byte" genre="config" instance="1" index="81" label="LED brightness" min="0" max="100" value="50">
|
|
<Help>
|
|
The parameter determines the brightness of LED when indicating
|
|
motion.
|
|
Available settings: 0 - 100 (1 - 100%; 0 = brightness determined by
|
|
the ambient lighting - see parameters 82 and 83)
|
|
Default setting: 50
|
|
</Help>
|
|
</Value>
|
|
<Value type="short" genre="config" instance="1" index="82" label="Ambient illumination level below which LED brightness is set to 1%" min="0" max="65535" value="100">
|
|
<Help>
|
|
The parameter is relevant only when the parameter 81 is set to 0.
|
|
Available settings: 0 to parameter 83 value
|
|
Default setting: 100 (100 lux)
|
|
</Help>
|
|
</Value>
|
|
<Value type="short" genre="config" instance="1" index="83" label="Ambient illumination level above which LED brightness is set to 100%" min="0" max="65535" value="1000">
|
|
<Help>
|
|
The parameter is relevant only when the parameter 81 is set to 0.
|
|
Available settings: parameter 82 value to 65535
|
|
Default setting: 1000 (1000 lux)
|
|
NOTE
|
|
The value of the parameter 83 must be higher than
|
|
the value of the parameter 82.
|
|
</Help>
|
|
</Value>
|
|
<Value type="byte" genre="config" instance="1" index="86" label="Minimum temperature resulting in blue LED illumination" min="0" max="255" value="18">
|
|
<Help>
|
|
This parameter is relevant only when parameter 80 has been
|
|
properly configured.
|
|
Available settings: 0 to parameter 87 value (degrees Celsius)
|
|
Default setting: 18 (18C)
|
|
</Help>
|
|
</Value>
|
|
<Value type="byte" genre="config" instance="1" index="87" label="Maximum temperature resulting in red LED illumination" min="0" max="255" value="28">
|
|
<Help>
|
|
This parameter is relevant only when parameter 80 has been
|
|
properly configured.
|
|
Available settings: parameter 86 value to 255 (degrees Celsius)
|
|
Default setting: 28 (28C)
|
|
</Help>
|
|
</Value>
|
|
<Value type="list" genre="config" instance="1" index="89" label="LED indicating tamper alarm" min="0" max="1" value="1" size="1">
|
|
<Help>
|
|
Indicating mode resembles a police car (white, red and blue).
|
|
Default setting: 1 (on)
|
|
</Help>
|
|
<Item label="LED does not indicate tamper alarm." value="0" />
|
|
<Item label="LED indicates tamper alarm." value="1" />
|
|
</Value>
|
|
</CommandClass>
|
|
|
|
<!-- Basic set as report -->
|
|
<CommandClass id="32" setasreport="true"/>
|
|
|
|
<!-- Association Groups -->
|
|
<CommandClass id="133">
|
|
<Associations num_groups="3">
|
|
<Group index="1" max_associations="5" label="Basic Report"/>
|
|
<Group index="2" max_associations="5" label="Tamper Alarm"/>
|
|
<Group index="3" max_associations="1" label="Lifeline" auto="true"/>
|
|
</Associations>
|
|
</CommandClass>
|
|
|
|
</Product>
|