216 lines
13 KiB
XML
216 lines
13 KiB
XML
<?xml version="1.0" encoding="utf-8"?>
|
|
|
|
<Product xmlns='http://code.google.com/p/open-zwave/'>
|
|
<!--
|
|
Fibaro FGWPG111 Wall Plug
|
|
https://products.z-wavealliance.org/products/2899
|
|
https://products.z-wavealliance.org/products/2854
|
|
-->
|
|
|
|
<!-- COMMAND_CLASS_BASIC supported -->
|
|
<CommandClass id="32" action="add" request_flags="5"/>
|
|
|
|
<!-- Configuration -->
|
|
<CommandClass id="112">
|
|
<Value type="list" genre="config" instance="1" index="2" label="Remember device status after a power failure" value="1" size="1">
|
|
<Help>This parameter determines how the Wall Plug will react in the event of power supply failure (e.g. taking out from the electrical outlet).
|
|
After the power supply is back on, the Wall Plug can be restored to previous state or remain switched off.
|
|
This parameter is ignored in Always On mode - the device automatically turns ON after plugging it into the socket.
|
|
Default setting: 1
|
|
</Help>
|
|
<Item label="Device remains switched off" value="0"/>
|
|
<Item label="Device restores the state from before the power failure" value="1"/>
|
|
</Value>
|
|
|
|
<Value type="short" genre="config" instance="1" index="3" label="Overload safety switch" value="0" min="0" max="30000" size="2">
|
|
<Help>This function allows to turning off the controlled device in case of exceeding the defined power.
|
|
Controlled device can be turned back on via button or sending a control frame.
|
|
Available settings: 10 - 30000 (1,0W - 3000,0W step 0,1W).
|
|
Default setting: 0 (function inactive)
|
|
</Help>
|
|
</Value>
|
|
|
|
<Value type="byte" genre="config" instance="1" index="11" label="Power reporting" value="15" min="0" max="100" size="1">
|
|
<Help>This parameter determines the minimum percentage change inactive power consumption (in relation to the previously reported) that will result in sending new power report.
|
|
Available settings: 1-100. 0 - power reports inactive.
|
|
Default Setting: 15 (%)
|
|
</Help>
|
|
</Value>
|
|
|
|
<Value type="short" genre="config" instance="1" index="12" label="Energy reporting threshold" value="10" min="0" max="500" size="2">
|
|
<Help>This parameter determines the minimum change in energy consumption (in relation to the previously reported), that will result in sending a new report.
|
|
Available settings: 1-500 (0,01kWh - 5kWh). 0 - energy reports inactive.
|
|
Default Setting: 10 (0,1 kWh)
|
|
</Help>
|
|
</Value>
|
|
|
|
<Value type="short" genre="config" instance="1" index="13" label="Periodic power reporting" min="0" max="32400" value="3600" size="2">
|
|
<Help>This parameter defines time period between reports sent when changes in power load have not been record if changes are smaller than defined in parameter 11.
|
|
By default reports are sent every hour.
|
|
Available settings: 0 - 32400 (s). 0 - periodic reports inactive.
|
|
Default setting: 3600
|
|
</Help>
|
|
</Value>
|
|
|
|
<Value type="short" genre="config" instance="1" index="14" label="Periodic energy reporting" min="0" max="32400" value="3600" size="2">
|
|
<Help>This parameter defines time period between reports sent when changes in power load have not been recorded or if changes are smaller than in paramater 11.
|
|
By default reports are sent every hour.
|
|
Available settings: 0 - 32400 (s). 0 - periodic reports inactive.
|
|
Default setting: 3600
|
|
</Help>
|
|
</Value>
|
|
|
|
<Value type="list" genre="config" instance="1" index="15" label="Measuring energy consumed by the Wall Plug itself" value="0" size="1">
|
|
<Help>This parameter determines whether power metering should include the amount of power consumed by the Wall Plug itself.
|
|
Results are being added to the value of power consumed by controlled device.
|
|
Default setting: 0 Inactive
|
|
</Help>
|
|
<Item label="Inactive" value="0"/>
|
|
<Item label="Active" value="1"/>
|
|
</Value>
|
|
|
|
<Value type="short" genre="config" instance="1" index="21" label="UP value association group 3" value="500" min="100" max="30000" size="2">
|
|
<Help>Upper power threshold, used in parameter 23. Up value cannot be lower than a value specified in parameter 22.
|
|
Available settings: 100 - 30000 (10,0W - 30000,0W).
|
|
Default setting: 500 (50W)
|
|
</Help>
|
|
</Value>
|
|
|
|
<Value type="short" genre="config" instance="1" index="22" label="DOWN value association group 3" value="300" min="0" max="29900" size="2">
|
|
<Help>Lower power threshold, used in parameter 23.
|
|
DOWN value cannot be higher than a value specified in parameter 21.
|
|
Available settings: 0 - 29900 (0,0W - 2990,0W step 0,1W).
|
|
Default setting: 300 (30W)
|
|
</Help>
|
|
</Value>
|
|
|
|
<Value type="list" genre="config" instance="1" index="23" label="Controlling association group 3" value="3" size="1">
|
|
<Help>This parameter defines the way that 3rd association group devices are controlled.
|
|
Depends on the actual measured power(according to parameters 21 and 22 settings).
|
|
Default setting: 3
|
|
</Help>
|
|
<Item label="Send frame (with value set in parameter 26) only if power exceeded value of parameter 21 turn the associated devices ON, once the power drops below DOWN value (parameter 21)"
|
|
value="1"/>
|
|
<Item label="Send frame (with value set in parameter 27) only if power dropped below value of paramater 22"
|
|
value="2"/>
|
|
<Item label="Send frame in both cases" value="3"/>
|
|
</Value>
|
|
|
|
<Value type="short" genre="config" instance="1" index="24" label="Switch ON value - association group 2" value="255" min="0" max="255" size="2">
|
|
<Help>The value of BASIC SET command frame sent to the devices associated in 2nd group On/Off (Button) when turning the device ON using the button.
|
|
Available settings: 0-99 or 255.
|
|
Default setting: 255
|
|
</Help>
|
|
</Value>
|
|
|
|
<Value type="short" genre="config" instance="1" index="25" label="Switch OFF value - association group 2" value="255" min="0" max="255" size="2">
|
|
<Help>The value of BASIC SET command frame sent to the devices associated in 2nd group On/Off (Button) when turning the device OFF using the button.
|
|
Available settings: 0-99 or 255.
|
|
Default setting: 0
|
|
</Help>
|
|
</Value>
|
|
|
|
<Value type="short" genre="config" instance="1" index="26" label="THRESHOLD UP value - association group 3" value="255" min="0" max="255" size="2">
|
|
<Help>The value of BASIC SET command frame sent to the devices associated in 3rd group On/Off (Power) if power exceeded value of parameter 21.
|
|
Available settings: 0-99 or 255.
|
|
Default setting: 255
|
|
</Help>
|
|
</Value>
|
|
|
|
<Value type="short" genre="config" instance="1" index="27" label="THRESHOLD DOWN value - association group 3" value="255" min="0" max="255" size="2">
|
|
<Help>The value of BASIC SET command frame sent to the devices associated in 3rd group On/Off (Power) if power dropped below value of parameter 22.
|
|
Available settings: 0-99 or 255.
|
|
Default setting: 0
|
|
</Help>
|
|
</Value>
|
|
|
|
<Value type="list" genre="config" instance="1" index="30" label="Active Alarms" value="63" min="1" max="63" size="1">
|
|
<Help>Define Z-Wave network alarms to which the Wall Plug will respond.</Help>
|
|
<Item label="General alarm" value="1"/>
|
|
<Item label="Smoke alarm" value="2"/>
|
|
<Item label="CO alarm" value="4"/>
|
|
<Item label="CO2 alarm" value="8"/>
|
|
<Item label="High temperature alarm" value="16"/>
|
|
<Item label="Flood alarm" value="32"/>
|
|
<Item label="All alarms" value="63"/>
|
|
</Value>
|
|
|
|
<Value type="byte" genre="config" instance="1" index="31" label="Response to alarm frames" value="0" min="0" max="50" size="1">
|
|
<Help>This parameter defines how the Wall Plug will respond to alarms (device's status change).
|
|
In case of values 1 or 2 the Wall Plug is operating normally and LED frame signals an alarm through time defined in parameter 32 or until the alarm is cancelled.
|
|
In case of values 5 to 50 the Wall Plug does not report status change, power changes, ignores BASIC SET command frames.
|
|
After time defined in parameter 32 or after the alarm cancellation, connected device is set to the previous state.
|
|
0 - no reaction 1-turn connected device on 2-turn connected device off 5-50(0,5-50,0s step 0,1s)-cyclically change device state with set period.
|
|
Default setting:0-no reaction
|
|
</Help>
|
|
</Value>
|
|
|
|
<Value type="short" genre="config" instance="1" index="32" label="Alarm state duration" value="600" min="1" max="32400" size="2">
|
|
<Help>This parameter specifies the duration of alarm state.
|
|
If a device sending an alarm frame through the Z-Wave network sets alarm duration as well, this settings are ignored.
|
|
Available settings 1-32400(s)
|
|
Default setting: 600
|
|
</Help>
|
|
</Value>
|
|
|
|
<Value type="short" genre="config" instance="1" index="40" label="Power load for violet colour" value="30000" min="1000" max="30000" size="2">
|
|
<Help>This parameter determines maximum active power value, which when exceeded, causes the LED frame to flash violet. Function is active only when parameter 41 is set to 1 or 2.
|
|
Available settings: 1000 - 30000 (100,0W - 3000,0W, step 0,1W).
|
|
Default setting: 30000 (3000W)
|
|
</Help>
|
|
</Value>
|
|
|
|
<Value type="list" genre="config" instance="1" index="41" label="LED frame colour when controlled device is on" value="1" size="1">
|
|
<Help>When set to 1 or 2, LED frame colour will change depending on active power and parameter 40.
|
|
Other colours are set permanently and do not depend on power consumption
|
|
</Help>
|
|
<Item label="Illumination turned off completely" value="0"/>
|
|
<Item label="Colour changes smoothly depending on active power" value="1"/>
|
|
<Item label="Colour changes in steps depending on active power" value="2"/>
|
|
<Item label="White illumination" value="3"/>
|
|
<Item label="Red illumination" value="4"/>
|
|
<Item label="Green illumination" value="5"/>
|
|
<Item label="Blue illumination" value="6"/>
|
|
<Item label="Yellow illumination" value="7"/>
|
|
<Item label="Cyan illumination" value="8"/>
|
|
<Item label="Magenta illumination" value="9"/>
|
|
</Value>
|
|
|
|
<Value type="list" genre="config" instance="1" index="42" label="LED frame colour when controlled device is off" value="0" size="1">
|
|
<Help>This parameter defines the illumination colour after turning off.</Help>
|
|
<Item label="illumination turned off completely" value="0"/>
|
|
<Item label="LED frame is illuminated with a colour corresponding to the last measured power, before the controlled device was turned off" value="1"/>
|
|
<Item label="White illumination" value="3"/>
|
|
<Item label="Red illumination" value="4"/>
|
|
<Item label="Green illumination" value="5"/>
|
|
<Item label="Blue illumination" value="6"/>
|
|
<Item label="Yellow illumination" value="7"/>
|
|
<Item label="Cyan illumination" value="8"/>
|
|
<Item label="Magenta illumination" value="9"/>
|
|
</Value>
|
|
|
|
<Value type="list" genre="config" instance="1" index="43" label="LED frame colour at the Z-Wave network alarm detection" value="2" size="1">
|
|
<Help>This parameter defines the illumination colour in case of Z-Wave alarm.</Help>
|
|
<Item label="Illumination turned off completely" value="0"/>
|
|
<Item label="No change in colour. LED frame colour is determined by settings of parameters 41 or 42" value="1"/>
|
|
<Item label="LED frame flashes red / blue / white" value="2"/>
|
|
<Item label="White illumination" value="3"/>
|
|
<Item label="Red illumination" value="4"/>
|
|
<Item label="Green illumination" value="5"/>
|
|
<Item label="Blue illumination" value="6"/>
|
|
<Item label="Yellow illumination" value="7"/>
|
|
<Item label="Cyan illumination" value="8"/>
|
|
<Item label="Magenta illumination" value="9"/>
|
|
</Value>
|
|
</CommandClass>
|
|
|
|
<!-- Association Groups -->
|
|
<CommandClass id="133">
|
|
<Associations num_groups="3">
|
|
<Group index="1" max_associations="1" label="Lifeline"/>
|
|
<Group index="2" max_associations="5" label="BasicSet forward relay status on local Button event"/>
|
|
<Group index="3" max_associations="5" label="BasicSet base on Plug power"/>
|
|
</Associations>
|
|
</CommandClass>
|
|
|
|
</Product> |