46 lines
3.7 KiB
XML
46 lines
3.7 KiB
XML
<?xml version="1.0" encoding="utf-8"?>
|
|
<!-- Honeywell(Jasco) 39351 / ZW3005 In-Wall Smart Dimmerh -->
|
|
<Product xmlns='http://code.google.com/p/open-zwave/'>
|
|
<!-- Configuration Parameters - per https://products.z-wavealliance.org/products/2724 -->
|
|
<CommandClass id="112">
|
|
<Value type="list" index="3" genre="config" label="LED Light" min="0" max="2" value="0" size="1">
|
|
<Help>Sets when the LED on the switch is lit.</Help>
|
|
<Item label="LED on when light off" value="0" />
|
|
<Item label="LED on when light on" value="1" />
|
|
<Item label="LED always off" value="2" />
|
|
</Value>
|
|
<Value type="list" index="4" genre="config" label="Invert Switch" min="0" max="1" size="1" value="0">
|
|
<Help>Change the top of the switch to OFF and the bottom of the switch to ON, if the switch was installed upside down.</Help>
|
|
<Item label="No" value="0" />
|
|
<Item label="Yes" value="1" />
|
|
</Value>
|
|
<!-- Both the number of steps (or levels) that the dimmer will change and the timing of the steps can be modified to suit personal preferences. The timing of the steps can be adjusted in 10 millisecond intervals. As an example, the default setting for parameter 8 is 3. This means that the lighting level will change every 30 milliseconds when the Dim Command is received. A value of 255 would mean that the level would change every 2.55 seconds. Combined, the two parameters allow dim rate adjustments from 10 milliseconds to 4.2 minutes to go from maximum-to-minimum or minimum-to-maximum brightness levels. -->
|
|
<Value type="byte" index="7" genre="config" label="Z-Wave Command Dim Step" units="" min="1" max="99" value="1">
|
|
<Help>Indicates how many levels the dimmer will change for each dimming step.</Help>
|
|
</Value>
|
|
<Value type="short" index="8" genre="config" label="Z-Wave Command Dim Rate" units="x 10 milliseconds" min="1" max="255" value="3">
|
|
<Help>This value indicates in 10 millisecond resolution, how often the dim level will change. For example, if you set this parameter to 1, then every 10ms the dim level will change. If you set it to 255, then every 2.55 seconds the dim level will change.</Help>
|
|
</Value>
|
|
<Value type="byte" index="9" genre="config" label="Local Control Dim Step" units="" min="1" max="99" value="1">
|
|
<Help>Indicates how many levels the dimmer will change for each dimming step.</Help>
|
|
</Value>
|
|
<Value type="short" index="10" genre="config" label="Local Control Dim Rate" units="x 10 milliseconds" min="1" max="255" value="3">
|
|
<Help>This value indicates in 10 millisecond resolution, how often the dim level will change. For example, if you set this parameter to 1, then every 10ms the dim level will change. If you set it to 255, then every 2.55 seconds the dim level will change.</Help>
|
|
</Value>
|
|
<Value type="byte" index="11" genre="config" label="ALL ON/ALL OFF Dim Step" units="" min="1" max="99" value="1">
|
|
<Help>Indicates how many levels the dimmer will change for each dimming step.</Help>
|
|
</Value>
|
|
<Value type="short" index="12" genre="config" label="ALL ON/ALL OFF Dim Rate" units="x 10 milliseconds" min="1" max="255" value="3">
|
|
<Help>This value indicates in 10 millisecond resolution, how often the dim level will change. For example, if you set this parameter to 1, then every 10ms the dim level will change. If you set it to 255, then every 2.55 seconds the dim level will change.</Help>
|
|
</Value>
|
|
</CommandClass>
|
|
<!-- Association Groups -->
|
|
<CommandClass id="133">
|
|
<Associations num_groups="3">
|
|
<Group index="1" max_associations="5" label="Lifeline" />
|
|
<Group index="2" max_associations="5" label="Basic - Load" />
|
|
<Group index="3" max_associations="5" label="Basic - Double Tap" />
|
|
</Associations>
|
|
</CommandClass>
|
|
</Product>
|