open-zwave/config/polycontrol/doorlock.xml

87 lines
4.2 KiB
XML

<?xml version="1.0" encoding="utf-8"?>
<Product xmlns="http://code.google.com/p/open-zwave/">
<!-- Polycontrol: Danalock 150 door lock -->
<!-- COMMAND_CLASS_BASIC does not respond to requests -->
<CommandClass id="32" setasreport="true"/>
<CommandClass id="112">
<Value type="list" genre="config" instance="1" index="1" label="Direction" min="0" max="1" value="0" size="1">
<Help>0=The motor goes clockwise when unlatched; 1= The motor goes counterclockwise when unlatched</Help>
<Item label="Clockwise" value="0"/>
<Item label="Counterclockwise" value="1"/>
</Value>
<Value type="list" genre="config" instance="1" index="2" label="Lock Speed" min="1" max="5" value="5" size="1">
<Help>Speed (Torque)</Help>
<Item label="Slowest" value="1"/>
<Item label="Slow" value="2"/>
<Item label="Normal" value="3"/>
<Item label="Fast" value="4"/>
<Item label="Fastest" value="5"/>
</Value>
<Value type="list" genre="config" instance="1" index="3" label="Lock Mode" min="0" max="2" value="1" size="1">
<Help>0=Stepper motor mode wave drive (Power Saving); 1=Stepper motor mode full drive(Normal)</Help>
<Item label="Wave drive" value="0"/>
<Item label="Full drive" value="1"/>
<Item label="Relay mode" value="2"/>
</Value>
<Value type="byte" genre="config" instance="1" index="4" label="Lock Turn Degrees" min="1" max="100" value="9">
<Help>Factor 10 turn degree( 1 = degrees, 9 = 90 degres, etc. )</Help>
</Value>
<Value type="byte" genre="config" instance="1" index="5" label="Auto Latch time" min="0" max="60" value="0">
<Help>How many seconds from the lock has been unlatched to it automatically close again. If 0 then it's disabled</Help>
</Value>
<Value type="list" genre="config" instance="1" index="6" label="Sound" min="0" max="1" value="1" size="1">
<Help>Disable or enable the beep sound from latch or unlatch operations(</Help>
<Item label="Disable" value="0"/>
<Item label="Enable" value="1"/>
</Value>
<Value type="list" genre="config" instance="1" index="7" label="Battery Type" min="0" max="1" value="0" size="1">
<Help>Set the type of battery that powers the device. This affect the returned battery state.</Help>
<Item label="3.6V" value="0"/>
<Item label="3.0V" value="1"/>
</Value>
<Value type="byte" genre="config" instance="1" index="8" label="Battery Alarm Percent" min="0" max="100" value="0">
<Help>When the battery level is equal to, or under this value, the device will notify with a beep sound after latch or unlatch</Help>
</Value>
<Value type="list" genre="config" instance="1" index="9" label="Turn and Go" min="0" max="1" value="0" size="1">
<Help>Used if the lock is using a optional rotation sensor. Latch and Go on will turn automatically when manual turn is detected.</Help>
<Item label="Off" value="0"/>
<Item label="On" value="1"/>
</Value>
<Value type="byte" genre="config" instance="1" index="10" label="Brake and Go Back" min="0" max="15" value="0">
<Help>
0 = Disabled.
1-15 Seconds to brake.
When used the lock will brake for x amount of seconds and then turn 75 degrees back.
Made for special doors without door lever.(Only when unlatching).</Help>
</Value>
<Value type="list" genre="config" instance="1" index="11" label="Async" min="0" max="1" value="0" size="1">
<Help>
Used if the lock is using an optional rotation sensor.
When async is enabled the lock will auto calibrate if already unlatched and asked to Unlatch again (used for special door locks where the key turn is asynced from the inside nob.)
</Help>
<Item label="Off" value="0"/>
<Item label="On" value="1"/>
</Value>
<Value type="list" genre="config" instance="1" index="12" label="Door lock operation report type" min="0" max="2" value="0" size="1">
<Help>
0 = Simple supported by all controllers that support door locks.
1 = Advanced, more specific reports through notification Command Class.
2 = No Door lock operation reports are sent unsolicited.
</Help>
<Item label="Simple" value="0"/>
<Item label="Advanced" value="1"/>
<Item label="Nothing" value="2"/>
</Value>
</CommandClass>
<CommandClass id="133">
<Associations num_groups="1">
<Group index="1" max_associations="1" label="Lifeline" />
</Associations>
</CommandClass>
</Product>