32 lines
1.6 KiB
XML
32 lines
1.6 KiB
XML
<?xml version="1.0" encoding="utf-8"?>
|
|
|
|
<Product xmlns='http://code.google.com/p/open-zwave/'>
|
|
|
|
<!-- Configuration -->
|
|
<CommandClass id="112">
|
|
<Value type="list" genre="config" instance="1" index="1" label="1. Reset to factory Default" value="0" size="1">
|
|
<Help>Attention: This will delete all your configuration, but the device will remain in the network. Handle with care.</Help>
|
|
<Item label="Keep current config" value="0" />
|
|
<Item label="Reset to factory Default" value="1" />
|
|
</Value>
|
|
|
|
<Value type="list" genre="config" instance="1" index="2" label="2. Commands sent on external dry contact" value="0" size="1">
|
|
<Help>Configure what the external contact sends when trigger</Help>
|
|
<Item label="Alarm Report Type 2(default)" value="0" />
|
|
<Item label="Basic On or Basic OFF" value="1" />
|
|
</Value>
|
|
|
|
<Value type="list" genre="config" instance="1" index="5" label="5. Operating Mode" value="0" size="1">
|
|
<Help>Defines if the sensor is in normal wakeup-mode or always on. This function shall be used only for testing since it draining the battery very fast.</Help>
|
|
<Item label="Normal Wakeup (default)" value="0" />
|
|
<Item label="Always awake" value="3" />
|
|
</Value>
|
|
|
|
<Value type="short" genre="config" instance="1" index="6" label="6. Temperature Offset" min="0" max="65535" value="0">
|
|
<Help>Offset to the temperature. This parameter can be used to calibrate the temperature sensor function if needed. Note. As factory default the temperature sensor function is calibrated. 0 = 0K (default), not 0 = Temperature Offset in K</Help>
|
|
</Value>
|
|
|
|
</CommandClass>
|
|
|
|
</Product>
|