94 lines
5.0 KiB
XML
94 lines
5.0 KiB
XML
<?xml version="1.0" encoding="utf-8"?>
|
|
<Product xmlns='http://code.google.com/p/open-zwave/'>
|
|
<!--
|
|
Coolcam NAS-PD02ZE Motion Sensor (PIR) Version 2
|
|
-->
|
|
<!-- Configuration Parameters -->
|
|
<CommandClass id="112">
|
|
<Value type="list" genre="config" instance="1" index="1" label="Motion detection sensitivity" value="12" min="8" max="255" size="1">
|
|
<Help>Adapt the sensitivity of the motion detection.</Help>
|
|
<Item label="High Sensitivity" value="8" />
|
|
<Item label="Normal Sensitivity" value="12" />
|
|
<Item label="Lower Sensitivity" value="128" />
|
|
<Item label="Lowest Sensitivity" value="255" />
|
|
</Value>
|
|
|
|
<Value type="short" genre="config" instance="1" index="2" label="Motion detection ON time" units="second" value="30" min="5" max="600" size="2">
|
|
<Help>This parameter can be determined how long the associated devices should stay ON status.
|
|
For instance, this parameter is set to 30(second), the PIR detector will send a BASIC_SET Command to an associated device with value basic set level if PIR detector is triggered and the associated device will be turned on 30(second) before it is turned off.
|
|
This Parameter value must be large than Parameter 6#.
|
|
If user set this parameter to default by Configure CC, the parameter #6 will be set to default value.
|
|
Available Settings:5 to 600(second).
|
|
</Help>
|
|
</Value>
|
|
|
|
<Value type="byte" genre="config" instance="1" index="3" label="Basic Set Level" value="255" min="0" max="255" size="1">
|
|
<Help>Basic Set Command will be sent, on the associated devices (group 2), where contains a value when PIR detector is triggered, the receiver will take it for consideration; for instance, if a lamp module is received the Basic Set Command of which value is decisive as to how bright of dim level of lamp module shall be.
|
|
This Parameter is used to some associated devices.
|
|
Available Settings: 0, 1 to 99 or 255.
|
|
</Help>
|
|
</Value>
|
|
|
|
<Value type="list" genre="config" instance="1" index="4" label="Motion detection function" value="1" size="1">
|
|
<Help>
|
|
Enable the motion detection (PIR) function.
|
|
This parameter does not effect the luminance reporting.
|
|
</Help>
|
|
<Item label="Disable" value="0" />
|
|
<Item label="Enable" value="255" />
|
|
</Value>
|
|
|
|
<Value type="short" genre="config" instance="1" index="5" label="Ambient Illumination Lux Level" units="lux" value="100" min="0" max="1000" size="2">
|
|
<Help>
|
|
Define the illumination level value which determines when the 'Illumination switch ON function' is activated.
|
|
If the illumination level falls below this value and a person moves across or within the detected area, the motion sensor will switch on the associated device (group 2).
|
|
0 to 1000(Lux).
|
|
</Help>
|
|
</Value>
|
|
|
|
<Value type="byte" genre="config" instance="1" index="6" label="Motion detection blind time" units="second" value="8" min="1" max="8" size="1">
|
|
<Help>
|
|
Period after motion detection in which the sensor is insensitive for new motion detection.
|
|
This value must be less than the 'Motion detection ON time'.
|
|
Available Settings: 1 to 8(s).
|
|
</Help>
|
|
</Value>
|
|
|
|
<Value type="short" genre="config" instance="1" index="7" label="Illumination reporting interval" units="second" value="180" min="60" max="36000" size="2">
|
|
<Help>
|
|
Determine the time between illumination reports, even when value has not changed.
|
|
NOTE: This Value Must Be less than Wakeup Interval Time.
|
|
Available Settings: 60 ~ 36000(second).
|
|
</Help>
|
|
</Value>
|
|
|
|
<Value type="list" genre="config" instance="1" index="8" label="Illumination function" value="0" size="1">
|
|
<Help>
|
|
Enable the function to switch on a associated device (group 2) once motion has been detected and the illumination level will be less than the value specified in 'Illumination switch ON level'.
|
|
</Help>
|
|
<Item label="Disable" value="0" />
|
|
<Item label="Enable" value="1" />
|
|
</Value>
|
|
|
|
<Value type="byte" genre="config" instance="1" index="9" label="Illumination report threshold" units="lux" value="20" min="0" max="255" size="1">
|
|
<Help>This parameter defines by how much Lux Level must change, in lux, to be reported to the main controller.</Help>
|
|
</Value>
|
|
|
|
<Value type="list" genre="config" instance="1" index="10" label="Motion detection LED indication" value="1" size="1">
|
|
<Help>Enable LED/PIR to blink red when motion detected.</Help>
|
|
<Item label="Disable" value="0" />
|
|
<Item label="Enable" value="1" />
|
|
</Value>
|
|
|
|
</CommandClass>
|
|
<!-- Association Groups -->
|
|
<CommandClass id="133">
|
|
<Associations num_groups="4">
|
|
<Group index="1" max_associations="4" label="Lifeline" />
|
|
<Group index="2" max_associations="4" label="Control Commands BASIC_SET" />
|
|
<Group index="3" max_associations="4" label="Send Notification Report" />
|
|
<Group index="4" max_associations="4" label="Send Sensor Binary Report" />
|
|
</Associations>
|
|
</CommandClass>
|
|
</Product>
|