peterge1998
0637ab3e09
Add information about error: Battery is lower than 20%
2020-04-09 20:06:28 +02:00
sorryusernameisalreadytaken
7452304491
Dennis just pleased to use this domain " Please use the domain "builder.dontvacuum.me" instead of "dustbuilder.xvm.mit.edu" in the future. That way I can balance the loads easier."
2020-03-03 14:36:12 +01:00
CrazYoshi
b515a7e683
adding --ip option after upgrade-firmware to avoid "no request" error
2020-02-28 19:02:25 +01:00
BoxedBrain
eb04ba6d1a
As shown on DustBuilder: "Please use the domain builder.dontvacuum.me instead of dustbuilder.xvm.mit.edu"
2020-02-25 16:00:46 +01:00
JPT77
e43e99fa78
added more troubleshooting
2020-02-14 13:52:56 +01:00
JPT77
edc631739d
added more troubleshooting
2020-02-14 13:45:54 +01:00
JPT77
70fff2afca
added Troubleshooting Firmware Installation section
2020-02-13 20:31:11 +01:00
JPT77
4139a1464e
added requirement Wifi, warning about versions, cd firmware
2020-02-13 20:23:21 +01:00
Sören Beye
768f7cbd54
Updated Installation Instructions (markdown)
2020-01-20 08:51:03 +01:00
Sören Beye
b952a98aa1
Revert 28b74102988256ed64e96bea51aacc1997dea6ad...db89b8255d30abe183e2d5d62cb06a4e4d85031f on Installation Instructions
2019-10-25 12:27:11 +02:00
Dominik
db89b8255d
Revert f837741c56c81014a38f9afaa47aa1c4628271be...28b74102988256ed64e96bea51aacc1997dea6ad on Installation Instructions
2019-10-17 08:41:57 +02:00
keksimusmaximus
28b7410298
Updated Gen2 URLs since they were all dead for v11_001886.fullos.pkg, explained initial ssh login a little more detailed.
2019-10-12 16:13:16 +02:00
Sören Beye
922472ac65
Updated Installation Instructions (markdown)
2019-09-30 09:09:42 +02:00
Sam
45ba89fee4
no need for '../firmware/' because of 'pushd firmware'
2019-09-30 01:57:06 +02:00
Franzl123
7e43172f4a
Updated Installation Instructions (markdown)
2019-09-29 23:01:07 +02:00
SimonCW
affebf2941
Fix directory structure to be consistent with the explanations above. The image is built in the `firmware` dir, not `image`
2019-09-22 16:40:13 +02:00
Mataschke
42738acdc4
Updated Installation Instructions (markdown)
2019-09-07 20:48:04 +00:00
Sylvia van Os
af4694e990
Add firewall hints for RedHat-based systems
2019-08-18 13:20:42 +02:00
Tschipel
0284d5c206
Die Befehle 'mkdir image' und 'cd image' sind nicht mehr aktuell
2019-08-12 18:45:35 +02:00
magnulu
95c6133c36
Changed example URL to reflect recommended firmware version
2019-06-06 20:40:52 +02:00
Dennis Giese
7ca5cb301b
Updated Installation Instructions (markdown)
2019-05-25 18:35:20 -04:00
Andreas Schneider
19e960e0f8
Updated Installation Instructions (markdown)
2019-05-19 19:55:04 +02:00
Sascha Schmidt
e004a7f500
Inserted two obstacles I encoutert during installation.
2019-05-14 18:15:21 +02:00
thepill
5ae275b5ce
Updated Installation Instructions (markdown)
2019-05-04 23:34:11 +02:00
thepill
75f1bd09fc
Updated Installation Instructions (markdown)
2019-05-04 23:31:17 +02:00
thepill
550f5463ce
Make clear that the current firmware doesn't matter
2019-05-04 22:32:44 +02:00
bruvv
6e6a92d196
Updated Installation Instructions (markdown)
2019-04-24 22:00:44 +02:00
bruvv
0ecbad6228
Updated Installation Instructions (markdown)
2019-04-24 22:00:26 +02:00
Sören Beye
a8619798e0
Updated Installation Instructions (markdown)
2019-04-24 20:22:13 +02:00
Sören Beye
ae9f35bbb4
Updated Installation Instructions (markdown)
2019-04-24 19:57:54 +02:00
fvollmer
599b6e7569
update command to use mirobo to update firmware (flasher.py uses miio anyway)
2019-04-22 13:10:40 +02:00
vene4ka
fe6375d147
Updated Installation Instructions (markdown)
2019-04-14 13:48:33 +03:00
d1slact0r
f837741c56
Updated Installation Instructions (markdown)
2019-04-12 15:20:05 +02:00
ThUnD3r|Gr33n
3efc9be71f
Updated Installation Instructions (markdown)
2019-04-10 11:15:12 +02:00
ThUnD3r|Gr33n
35cbf40444
Updated Installation Instructions (markdown)
2019-04-10 11:13:11 +02:00
tadly
9def054018
fixes Gen1 URL code tag
2019-04-08 16:55:50 +02:00
Andreas Schneider
75e299515b
Updated Installation Instructions (markdown)
2019-04-08 10:40:10 +02:00
d1slact0r
63bf88835d
updated to the correct path
2019-04-08 10:06:43 +02:00
Andreas Schneider
00c5a966b8
Updated Installation Instructions (markdown)
2019-04-08 09:46:24 +02:00
Sören Beye
37e10937f7
Updated Installation Instructions (markdown)
2019-04-07 20:29:08 +02:00
Sören Beye
4b6d5ddd40
Updated Installation Instructions (markdown)
2019-04-07 13:55:52 +02:00
Sören Beye
80cb6a14d7
Removed --disable-logs since thats already integrated in --valetudo-path
2019-04-06 10:17:33 +02:00
Sören Beye
8669da8fb2
Updated Installation Instructions (markdown)
2019-04-05 23:33:48 +02:00
Sören Beye
17c13100dc
Installation Instructions v0.1
2019-04-04 20:11:09 +02:00