mirrors
/
authelia
mirror of https://github.com/authelia/authelia.git
0
0
Fork 0
Code Issues Projects Releases Wiki Activity
authelia/internal/configuration/config.template.yml

1427 lines
58 KiB
YAML
Raw Permalink Blame History

# yamllint disable rule:comments-indentation
---
###############################################################################
## Authelia Configuration ##
###############################################################################
##
## Notes:
##
## - the default location of this file is assumed to be configuration.yml unless otherwise noted
## - when using docker the container expects this by default to be at /config/configuration.yml
## - the default location where this file is loaded from can be overridden with the X_AUTHELIA_CONFIG environment var
## - the comments in this configuration file are helpful but users should consult the official documentation on the
## website at https://www.authelia.com/ or https://www.authelia.com/configuration/prologue/introduction/
## - this configuration file template is not automatically updated
##
## Certificates directory specifies where Authelia will load trusted certificates (public portion) from in addition to
## the system certificates store.
## They should be in base64 format, and have one of the following extensions: *.cer, *.crt, *.pem.
# certificates_directory: '/config/certificates/'
## The theme to display: light, dark, grey, auto.
# theme: 'light'
## Set the default 2FA method for new users and for when a user has a preferred method configured that has been
## disabled. This setting must be a method that is enabled.
## Options are totp, webauthn, mobile_push.
# default_2fa_method: ''
##
## Server Configuration
##
# server:
## The address for the Main server to listen on in the address common syntax.
## Formats:
## - [<scheme>://]<hostname>[:<port>][/<path>]
## - [<scheme>://][hostname]:<port>[/<path>]
## Square brackets indicate optional portions of the format. Scheme must be 'tcp', 'tcp4', 'tcp6', or 'unix'.
## The default scheme is 'unix' if the address is an absolute path otherwise it's 'tcp'. The default port is '9091'.
## If the path is specified this configures the router to handle both the `/` path and the configured path.
# address: 'tcp://:9091/'
## Set the path on disk to Authelia assets.
## Useful to allow overriding of specific static assets.
# asset_path: '/config/assets/'
## Disables writing the health check vars to /app/.healthcheck.env which makes healthcheck.sh return exit code 0.
## This is disabled by default if either /app/.healthcheck.env or /app/healthcheck.sh do not exist.
# disable_healthcheck: false
## Authelia by default doesn't accept TLS communication on the server port. This section overrides this behaviour.
# tls:
## The path to the DER base64/PEM format private key.
# key: ''
## The path to the DER base64/PEM format public certificate.
# certificate: ''
## The list of certificates for client authentication.
# client_certificates: []
## Server headers configuration/customization.
# headers:
## The CSP Template. Read the docs.
# csp_template: ''
## Server Buffers configuration.
# buffers:
## Buffers usually should be configured to be the same value.
## Explanation at https://www.authelia.com/c/server#buffer-sizes
## Read buffer size adjusts the server's max incoming request size in bytes.
## Write buffer size does the same for outgoing responses.
## Read buffer.
# read: 4096
## Write buffer.
# write: 4096
## Server Timeouts configuration.
# timeouts:
## Read timeout in the duration common syntax.
# read: '6 seconds'
## Write timeout in the duration common syntax.
# write: '6 seconds'
## Idle timeout in the duration common syntax.
# idle: '30 seconds'
## Server Endpoints configuration.
## This section is considered advanced and it SHOULD NOT be configured unless you've read the relevant documentation.
# endpoints:
## Enables the pprof endpoint.
# enable_pprof: false
## Enables the expvars endpoint.
# enable_expvars: false
## Configure the authz endpoints.
# authz:
# forward-auth:
# implementation: 'ForwardAuth'
# authn_strategies: []
# ext-authz:
# implementation: 'ExtAuthz'
# authn_strategies: []
# auth-request:
# implementation: 'AuthRequest'
# authn_strategies: []
# legacy:
# implementation: 'Legacy'
# authn_strategies: []
##
## Log Configuration
##
# log:
## Level of verbosity for logs: info, debug, trace.
# level: 'debug'
## Format the logs are written as: json, text.
# format: 'json'
## File path where the logs will be written. If not set logs are written to stdout.
# file_path: '/config/authelia.log'
## Whether to also log to stdout when a log_file_path is defined.
# keep_stdout: false
##
## Telemetry Configuration
##
# telemetry:
##
## Metrics Configuration
##
# metrics:
## Enable Metrics.
# enabled: false
## The address for the Metrics server to listen on in the address common syntax.
## Formats:
## - [<scheme>://]<hostname>[:<port>][/<path>]
## - [<scheme>://][hostname]:<port>[/<path>]
## Square brackets indicate optional portions of the format. Scheme must be 'tcp', 'tcp4', 'tcp6', or 'unix'.
## The default scheme is 'unix' if the address is an absolute path otherwise it's 'tcp'. The default port is '9959'.
## If the path is not specified it defaults to `/metrics`.
# address: 'tcp://:9959/metrics'
## Metrics Server Buffers configuration.
# buffers:
## Read buffer.
# read: 4096
## Write buffer.
# write: 4096
## Metrics Server Timeouts configuration.
# timeouts:
## Read timeout in the duration common syntax.
# read: '6 seconds'
## Write timeout in the duration common syntax.
# write: '6 seconds'
## Idle timeout in the duration common syntax.
# idle: '30 seconds'
##
## TOTP Configuration
##
## Parameters used for TOTP generation.
# totp:
## Disable TOTP.
# disable: false
## The issuer name displayed in the Authenticator application of your choice.
# issuer: 'authelia.com'
## The TOTP algorithm to use.
## It is CRITICAL you read the documentation before changing this option:
## https://www.authelia.com/c/totp#algorithm
# algorithm: 'SHA1'
## The number of digits a user has to input. Must either be 6 or 8.
## Changing this option only affects newly generated TOTP configurations.
## It is CRITICAL you read the documentation before changing this option:
## https://www.authelia.com/c/totp#digits
# digits: 6
## The period in seconds a Time-based One-Time Password is valid for.
## Changing this option only affects newly generated TOTP configurations.
# period: 30
## The skew controls number of Time-based One-Time Passwords either side of the current one that are valid.
## Warning: before changing skew read the docs link below.
# skew: 1
## See: https://www.authelia.com/c/totp#input-validation to read
## the documentation.
## The size of the generated shared secrets. Default is 32 and is sufficient in most use cases, minimum is 20.
# secret_size: 32
## The allowed algorithms for a user to pick from.
# allowed_algorithms:
# - 'SHA1'
## The allowed digits for a user to pick from.
# allowed_digits:
# - 6
## The allowed periods for a user to pick from.
# allowed_periods:
# - 30
## Disable the reuse security policy which prevents replays of one-time password code values.
# disable_reuse_security_policy: false
##
## WebAuthn Configuration
##
## Parameters used for WebAuthn.
# webauthn:
## Disable WebAuthn.
# disable: false
## The interaction timeout for WebAuthn dialogues in the duration common syntax.
# timeout: '60 seconds'
## The display name the browser should show the user for when using WebAuthn to login/register.
# display_name: 'Authelia'
## Conveyance preference controls if we collect the attestation statement including the AAGUID from the device.
## Options are none, indirect, direct.
# attestation_conveyance_preference: 'indirect'
## User verification controls if the user must make a gesture or action to confirm they are present.
## Options are required, preferred, discouraged.
# user_verification: 'preferred'
##
## Duo Push API Configuration
##
## Parameters used to contact the Duo API. Those are generated when you protect an application of type
## "Partner Auth API" in the management panel.
# duo_api:
# disable: false
# hostname: 'api-123456789.example.com'
# integration_key: 'ABCDEF'
## Secret can also be set using a secret: https://www.authelia.com/c/secrets
# secret_key: '1234567890abcdefghifjkl'
# enable_self_enrollment: false
##
## Identity Validation Configuration
##
## This configuration tunes the identity validation flows.
identity_validation:
## Reset Password flow. Adjusts how the reset password flow operates.
reset_password:
## Maximum allowed time before the JWT is generated and when the user uses it in the duration common syntax.
# jwt_lifespan: '5 minutes'
## The algorithm used for the Reset Password JWT.
# jwt_algorithm: 'HS256'
## The secret key used to sign and verify the JWT.
jwt_secret: 'a_very_important_secret'
## Elevated Session flows. Adjusts the flow which require elevated sessions for example managing credentials, adding,
## removing, etc.
# elevated_session:
## Maximum allowed lifetime after the One-Time Code is generated that it is considered valid.
# code_lifespan: '5 minutes'
## Maximum allowed lifetime after the user uses the One-Time Code and the user must perform the validation again in
## the duration common syntax.
# elevation_lifespan: '10 minutes'
## Number of characters the one-time password contains.
# characters: 8
## In addition to the One-Time Code requires the user performs a second factor authentication.
# require_second_factor: false
## Skips the elevation requirement and entry of the One-Time Code if the user has performed second factor
## authentication.
# skip_second_factor: false
##
## NTP Configuration
##
## This is used to validate the servers time is accurate enough to validate TOTP.
# ntp:
## The address of the NTP server to connect to in the address common syntax.
## Format: [<scheme>://]<hostname>[:<port>].
## Square brackets indicate optional portions of the format. Scheme must be 'udp', 'udp4', or 'udp6'.
## The default scheme is 'udp'. The default port is '123'.
# address: 'udp://time.cloudflare.com:123'
## NTP version.
# version: 4
## Maximum allowed time offset between the host and the NTP server in the duration common syntax.
# max_desync: '3 seconds'
## Disables the NTP check on startup entirely. This means Authelia will not contact a remote service at all if you
## set this to true, and can operate in a truly offline mode.
# disable_startup_check: false
## The default of false will prevent startup only if we can contact the NTP server and the time is out of sync with
## the NTP server more than the configured max_desync. If you set this to true, an error will be logged but startup
## will continue regardless of results.
# disable_failure: false
##
## Authentication Backend Provider Configuration
##
## Used for verifying user passwords and retrieve information such as email address and groups users belong to.
##
## The available providers are: `file`, `ldap`. You must use only one of these providers.
# authentication_backend:
## Password Reset Options.
# password_reset:
## Disable both the HTML element and the API for reset password functionality.
# disable: false
## External reset password url that redirects the user to an external reset portal. This disables the internal reset
## functionality.
# custom_url: ''
## The amount of time to wait before we refresh data from the authentication backend in the duration common syntax.
## To disable this feature set it to 'disable', this will slightly reduce security because for Authelia, users will
## always belong to groups they belonged to at the time of login even if they have been removed from them in LDAP.
## To force update on every request you can set this to '0' or 'always', this will increase processor demand.
## See the below documentation for more information.
## Refresh Interval docs: https://www.authelia.com/c/1fa#refresh-interval
# refresh_interval: '5 minutes'
##
## LDAP (Authentication Provider)
##
## This is the recommended Authentication Provider in production
## because it allows Authelia to offload the stateful operations
## onto the LDAP service.
# ldap:
## The address of the directory server to connect to in the address common syntax.
## Format: [<scheme>://]<hostname>[:<port>].
## Square brackets indicate optional portions of the format. Scheme must be 'ldap', 'ldaps', or 'ldapi`.
## The default scheme is 'ldapi' if the address is an absolute path otherwise it's 'ldaps'.
## The default port is '636', unless the scheme is 'ldap' in which case it's '389'.
# address: 'ldaps://127.0.0.1:636'
## The LDAP implementation, this affects elements like the attribute utilised for resetting a password.
## Acceptable options are as follows:
## - 'activedirectory' - for Microsoft Active Directory.
## - 'freeipa' - for FreeIPA.
## - 'lldap' - for lldap.
## - 'custom' - for custom specifications of attributes and filters.
## This currently defaults to 'custom' to maintain existing behaviour.
##
## Depending on the option here certain other values in this section have a default value, notably all of the
## attribute mappings have a default value that this config overrides, you can read more about these default values
## at https://www.authelia.com/c/ldap#defaults
# implementation: 'custom'
## The dial timeout for LDAP in the duration common syntax.
# timeout: '5 seconds'
## Use StartTLS with the LDAP connection.
# start_tls: false
# tls:
## The server subject name to check the servers certificate against during the validation process.
## This option is not required if the certificate has a SAN which matches the address options hostname.
# server_name: 'ldap.example.com'
## Skip verifying the server certificate entirely. In preference to setting this we strongly recommend you add the
## certificate or the certificate of the authority signing the certificate to the certificates directory which is
## defined by the `certificates_directory` option at the top of the configuration.
## It's important to note the public key should be added to the directory, not the private key.
## This option is strongly discouraged but may be useful in some self-signed situations where validation is not
## important to the administrator.
# skip_verify: false
## Minimum TLS version for the connection.
# minimum_version: 'TLS1.2'
## Maximum TLS version for the connection.
# maximum_version: 'TLS1.3'
## The certificate chain used with the private_key if the server requests TLS Client Authentication
## i.e. Mutual TLS.
# certificate_chain: |
# -----BEGIN CERTIFICATE-----
# ...
# -----END CERTIFICATE-----
# -----BEGIN CERTIFICATE-----
# ...
# -----END CERTIFICATE-----
## The private key used with the certificate_chain if the server requests TLS Client Authentication
## i.e. Mutual TLS.
# private_key: |
# -----BEGIN RSA PRIVATE KEY-----
# ...
# -----END RSA PRIVATE KEY-----
## The distinguished name of the container searched for objects in the directory information tree.
## See also: additional_users_dn, additional_groups_dn.
# base_dn: 'dc=example,dc=com'
## The additional_users_dn is prefixed to base_dn and delimited by a comma when searching for users.
## i.e. with this set to OU=Users and base_dn set to DC=a,DC=com; OU=Users,DC=a,DC=com is searched for users.
# additional_users_dn: 'ou=users'
## The users filter used in search queries to find the user profile based on input filled in login form.
## Various placeholders are available in the user filter which you can read about in the documentation which can
## be found at: https://www.authelia.com/c/ldap#users-filter-replacements
##
## Recommended settings are as follows:
## - Microsoft Active Directory: (&({username_attribute}={input})(objectCategory=person)(objectClass=user))
## - OpenLDAP:
## - (&({username_attribute}={input})(objectClass=person))
## - (&({username_attribute}={input})(objectClass=inetOrgPerson))
##
## To allow sign in both with username and email, one can use a filter like
## (&(|({username_attribute}={input})({mail_attribute}={input}))(objectClass=person))
# users_filter: '(&({username_attribute}={input})(objectClass=person))'
## The additional_groups_dn is prefixed to base_dn and delimited by a comma when searching for groups.
## i.e. with this set to OU=Groups and base_dn set to DC=a,DC=com; OU=Groups,DC=a,DC=com is searched for groups.
# additional_groups_dn: 'ou=groups'
## The groups filter used in search queries to find the groups based on relevant authenticated user.
## Various placeholders are available in the groups filter which you can read about in the documentation which can
## be found at: https://www.authelia.com/c/ldap#groups-filter-replacements
##
## If your groups use the `groupOfUniqueNames` structure use this instead:
## (&(uniqueMember={dn})(objectClass=groupOfUniqueNames))
# groups_filter: '(&(member={dn})(objectClass=groupOfNames))'
## The group search mode to use. Options are 'filter' or 'memberof'. It's essential to read the docs if you wish to
## use 'memberof'. Also 'filter' is the best choice for most use cases.
# group_search_mode: 'filter'
## Follow referrals returned by the server.
## This is especially useful for environments where read-only servers exist. Only implemented for write operations.
# permit_referrals: false
## The username and password of the admin user.
# user: 'cn=admin,dc=example,dc=com'
## Password can also be set using a secret: https://www.authelia.com/c/secrets
# password: 'password'
## The attributes for users and objects from the directory server.
# attributes:
## The distinguished name attribute if your directory server supports it. Users should read the docs before
## configuring. Only used for the 'memberof' group search mode.
# distinguished_name: ''
## The attribute holding the username of the user. This attribute is used to populate the username in the session
## information. For your information, Microsoft Active Directory usually uses 'sAMAccountName' and OpenLDAP
## usually uses 'uid'. Beware that this attribute holds the unique identifiers for the users binding the user and
## the configuration stored in database; therefore only single value attributes are allowed and the value must
## never be changed once attributed to a user otherwise it would break the configuration for that user.
## Technically non-unique attributes like 'mail' can also be used but we don't recommend using them, we instead
## advise to use a filter to perform alternative lookups and the attributes mentioned above
## (sAMAccountName and uid) to follow https://datatracker.ietf.org/doc/html/rfc2307.
# username: 'uid'
## The attribute holding the display name of the user. This will be used to greet an authenticated user.
# display_name: 'displayName'
## The attribute holding the mail address of the user. If multiple email addresses are defined for a user, only
## the first one returned by the directory server is used.
# mail: 'mail'
## The attribute which provides distinguished names of groups an object is a member of.
## Only used for the 'memberof' group search mode.
# member_of: 'memberOf'
## The attribute holding the name of the group.
# group_name: 'cn'
##
## File (Authentication Provider)
##
## With this backend, the users database is stored in a file which is updated when users reset their passwords.
## Therefore, this backend is meant to be used in a dev environment and not in production since it prevents Authelia
## to be scaled to more than one instance. The options under 'password' have sane defaults, and as it has security
## implications it is highly recommended you leave the default values. Before considering changing these settings
## please read the docs page below:
## https://www.authelia.com/r/passwords#tuning
##
## Important: Kubernetes (or HA) users must read https://www.authelia.com/t/statelessness
##
# file:
# path: '/config/users_database.yml'
# watch: false
# search:
# email: false
# case_insensitive: false
# password:
# algorithm: 'argon2'
# argon2:
# variant: 'argon2id'
# iterations: 3
# memory: 65536
# parallelism: 4
# key_length: 32
# salt_length: 16
# scrypt:
# iterations: 16
# block_size: 8
# parallelism: 1
# key_length: 32
# salt_length: 16
# pbkdf2:
# variant: 'sha512'
# iterations: 310000
# salt_length: 16
# sha2crypt:
# variant: 'sha512'
# iterations: 50000
# salt_length: 16
# bcrypt:
# variant: 'standard'
# cost: 12
##
## Password Policy Configuration.
##
# password_policy:
## The standard policy allows you to tune individual settings manually.
# standard:
# enabled: false
## Require a minimum length for passwords.
# min_length: 8
## Require a maximum length for passwords.
# max_length: 0
## Require uppercase characters.
# require_uppercase: true
## Require lowercase characters.
# require_lowercase: true
## Require numeric characters.
# require_number: true
## Require special characters.
# require_special: true
## zxcvbn is a well known and used password strength algorithm. It does not have tunable settings.
# zxcvbn:
# enabled: false
## Configures the minimum score allowed.
# min_score: 3
##
## Privacy Policy Configuration
##
## Parameters used for displaying the privacy policy link and drawer.
# privacy_policy:
## Enables the display of the privacy policy using the policy_url.
# enabled: false
## Enables the display of the privacy policy drawer which requires users accept the privacy policy
## on a per-browser basis.
# require_user_acceptance: false
## The URL of the privacy policy document. Must be an absolute URL and must have the 'https://' scheme.
## If the privacy policy enabled option is true, this MUST be provided.
# policy_url: ''
##
## Access Control Configuration
##
## Access control is a list of rules defining the authorizations applied for one resource to users or group of users.
##
## If 'access_control' is not defined, ACL rules are disabled and the 'deny' rule is applied, i.e., access is denied
## to everyone. Otherwise restrictions follow the rules defined.
##
## Note: One can use the wildcard * to match any subdomain.
## It must stand at the beginning of the pattern. (example: *.example.com)
##
## Note: You must put patterns containing wildcards between simple quotes for the YAML to be syntactically correct.
##
## Definition: A 'rule' is an object with the following keys: 'domain', 'subject', 'policy' and 'resources'.
##
## - 'domain' defines which domain or set of domains the rule applies to.
##
## - 'subject' defines the subject to apply authorizations to. This parameter is optional and matching any user if not
## provided. If provided, the parameter represents either a user or a group. It should be of the form
## 'user:<username>' or 'group:<groupname>'.
##
## - 'policy' is the policy to apply to resources. It must be either 'bypass', 'one_factor', 'two_factor' or 'deny'.
##
## - 'resources' is a list of regular expressions that matches a set of resources to apply the policy to. This parameter
## is optional and matches any resource if not provided.
##
## Note: the order of the rules is important. The first policy matching (domain, resource, subject) applies.
# access_control:
## Default policy can either be 'bypass', 'one_factor', 'two_factor' or 'deny'. It is the policy applied to any
## resource if there is no policy to be applied to the user.
# default_policy: 'deny'
# networks:
# - name: 'internal'
# networks:
# - '10.10.0.0/16'
# - '192.168.2.0/24'
# - name: 'VPN'
# networks: '10.9.0.0/16'
# rules:
## Rules applied to everyone
# - domain: 'public.example.com'
# policy: 'bypass'
## Domain Regex examples. Generally we recommend just using a standard domain.
# - domain_regex: '^(?P<User>\w+)\.example\.com$'
# policy: 'one_factor'
# - domain_regex: '^(?P<Group>\w+)\.example\.com$'
# policy: 'one_factor'
# - domain_regex:
# - '^appgroup-.*\.example\.com$'
# - '^appgroup2-.*\.example\.com$'
# policy: 'one_factor'
# - domain_regex: '^.*\.example\.com$'
# policy: 'two_factor'
# - domain: 'secure.example.com'
# policy: 'one_factor'
## Network based rule, if not provided any network matches.
# networks:
# - 'internal'
# - 'VPN'
# - '192.168.1.0/24'
# - '10.0.0.1'
# - domain:
# - 'secure.example.com'
# - 'private.example.com'
# policy: 'two_factor'
# - domain: 'singlefactor.example.com'
# policy: 'one_factor'
## Rules applied to 'admins' group
# - domain: 'mx2.mail.example.com'
# subject: 'group:admins'
# policy: 'deny'
# - domain: '*.example.com'
# subject:
# - 'group:admins'
# - 'group:moderators'
# policy: 'two_factor'
## Rules applied to 'dev' group
# - domain: 'dev.example.com'
# resources:
# - '^/groups/dev/.*$'
# subject: 'group:dev'
# policy: 'two_factor'
## Rules applied to user 'john'
# - domain: 'dev.example.com'
# resources:
# - '^/users/john/.*$'
# subject: 'user:john'
# policy: 'two_factor'
## Rules applied to user 'harry'
# - domain: 'dev.example.com'
# resources:
# - '^/users/harry/.*$'
# subject: 'user:harry'
# policy: 'two_factor'
## Rules applied to user 'bob'
# - domain: '*.mail.example.com'
# subject: 'user:bob'
# policy: 'two_factor'
# - domain: 'dev.example.com'
# resources:
# - '^/users/bob/.*$'
# subject: 'user:bob'
# policy: 'two_factor'
##
## Session Provider Configuration
##
## The session cookies identify the user once logged in.
## The available providers are: `memory`, `redis`. Memory is the provider unless redis is defined.
session:
## The secret to encrypt the session data. This is only used with Redis / Redis Sentinel.
## Secret can also be set using a secret: https://www.authelia.com/c/secrets
secret: 'insecure_session_secret'
## Cookies configures the list of allowed cookie domains for sessions to be created on.
## Undefined values will default to the values below.
# cookies:
# -
## The name of the session cookie.
# name: 'authelia_session'
## The domain to protect.
## Note: the Authelia portal must also be in that domain.
# domain: 'example.com'
## Required. The fully qualified URI of the portal to redirect users to on proxies that support redirections.
## Rules:
## - MUST use the secure scheme 'https://'
## - The above 'domain' option MUST either:
## - Match the host portion of this URI.
## - Match the suffix of the host portion when prefixed with '.'.
# authelia_url: 'https://auth.example.com'
## Optional. The fully qualified URI used as the redirection location if the portal is accessed directly. Not
## configuring this option disables the automatic redirection behaviour.
##
## Note: this parameter is optional. If not provided, user won't be redirected upon successful authentication
## unless they were redirected to Authelia by the proxy.
##
## Rules:
## - MUST use the secure scheme 'https://'
## - MUST not match the 'authelia_url' option.
## - The above 'domain' option MUST either:
## - Match the host portion of this URI.
## - Match the suffix of the host portion when prefixed with '.'.
# default_redirection_url: 'https://www.example.com'
## Sets the Cookie SameSite value. Possible options are none, lax, or strict.
## Please read https://www.authelia.com/c/session#same_site
# same_site: 'lax'
## The value for inactivity, expiration, and remember_me are in seconds or the duration common syntax.
## All three of these values affect the cookie/session validity period. Longer periods are considered less secure
## because a stolen cookie will last longer giving attackers more time to spy or attack.
## The inactivity time before the session is reset. If expiration is set to 1h, and this is set to 5m, if the user
## does not select the remember me option their session will get destroyed after 1h, or after 5m since the last
## time Authelia detected user activity.
# inactivity: '5 minutes'
## The time before the session cookie expires and the session is destroyed if remember me IS NOT selected by the
## user.
# expiration: '1 hour'
## The time before the cookie expires and the session is destroyed if remember me IS selected by the user. Setting
## this value to -1 disables remember me for this session cookie domain. If allowed and the user uses the remember
## me checkbox this overrides the expiration option and disables the inactivity option.
# remember_me: '1 month'
## Cookie Session Domain default 'name' value.
# name: 'authelia_session'
## Cookie Session Domain default 'same_site' value.
# same_site: 'lax'
## Cookie Session Domain default 'inactivity' value.
# inactivity: '5m'
## Cookie Session Domain default 'expiration' value.
# expiration: '1h'
## Cookie Session Domain default 'remember_me' value.
# remember_me: '1M'
##
## Redis Provider
##
## Important: Kubernetes (or HA) users must read https://www.authelia.com/t/statelessness
##
# redis:
# host: '127.0.0.1'
# port: 6379
## Use a unix socket instead
# host: '/var/run/redis/redis.sock'
## The connection timeout in the duration common syntax.
# timeout: '5 seconds'
## The maximum number of retries on a failed command. Set it to 0 to disable retries.
# max_retries: 3
## Username used for redis authentication. This is optional and a new feature in redis 6.0.
# username: 'authelia'
## Password can also be set using a secret: https://www.authelia.com/c/secrets
# password: 'authelia'
## This is the Redis DB Index https://redis.io/commands/select (sometimes referred to as database number, DB, etc).
# database_index: 0
## The maximum number of concurrent active connections to Redis.
# maximum_active_connections: 8
## The target number of idle connections to have open ready for work. Useful when opening connections is slow.
# minimum_idle_connections: 0
## The Redis TLS configuration. If defined will require a TLS connection to the Redis instance(s).
# tls:
## The server subject name to check the servers certificate against during the validation process.
## This option is not required if the certificate has a SAN which matches the host option.
# server_name: 'myredis.example.com'
## Skip verifying the server certificate entirely. In preference to setting this we strongly recommend you add the
## certificate or the certificate of the authority signing the certificate to the certificates directory which is
## defined by the `certificates_directory` option at the top of the configuration.
## It's important to note the public key should be added to the directory, not the private key.
## This option is strongly discouraged but may be useful in some self-signed situations where validation is not
## important to the administrator.
# skip_verify: false
## Minimum TLS version for the connection.
# minimum_version: 'TLS1.2'
## Maximum TLS version for the connection.
# maximum_version: 'TLS1.3'
## The certificate chain used with the private_key if the server requests TLS Client Authentication
## i.e. Mutual TLS.
# certificate_chain: |
# -----BEGIN CERTIFICATE-----
# ...
# -----END CERTIFICATE-----
# -----BEGIN CERTIFICATE-----
# ...
# -----END CERTIFICATE-----
## The private key used with the certificate_chain if the server requests TLS Client Authentication
## i.e. Mutual TLS.
# private_key: |
# -----BEGIN RSA PRIVATE KEY-----
# ...
# -----END RSA PRIVATE KEY-----
## The Redis HA configuration options.
## This provides specific options to Redis Sentinel, sentinel_name must be defined (Master Name).
# high_availability:
## Sentinel Name / Master Name.
# sentinel_name: 'mysentinel'
## Specific username for Redis Sentinel. The node username and password is configured above.
# sentinel_username: 'sentinel_specific_user'
## Specific password for Redis Sentinel. The node username and password is configured above.
# sentinel_password: 'sentinel_specific_pass'
## The additional nodes to pre-seed the redis provider with (for sentinel).
## If the host in the above section is defined, it will be combined with this list to connect to sentinel.
## For high availability to be used you must have either defined; the host above or at least one node below.
# nodes:
# - host: 'sentinel-node1'
# port: 6379
# - host: 'sentinel-node2'
# port: 6379
## Choose the host with the lowest latency.
# route_by_latency: false
## Choose the host randomly.
# route_randomly: false
##
## Regulation Configuration
##
## This mechanism prevents attackers from brute forcing the first factor. It bans the user if too many attempts are made
## in a short period of time.
# regulation:
## The number of failed login attempts before user is banned. Set it to 0 to disable regulation.
# max_retries: 3
## The time range during which the user can attempt login before being banned in the duration common syntax. The user
## is banned if the authentication failed 'max_retries' times in a 'find_time' seconds window.
# find_time: '2 minutes'
## The length of time before a banned user can login again in the duration common syntax.
# ban_time: '5 minutes'
##
## Storage Provider Configuration
##
## The available providers are: `local`, `mysql`, `postgres`. You must use one and only one of these providers.
# storage:
## The encryption key that is used to encrypt sensitive information in the database. Must be a string with a minimum
## length of 20. Please see the docs if you configure this with an undesirable key and need to change it, you MUST use
## the CLI to change this in the database if you want to change it from a previously configured value.
# encryption_key: 'you_must_generate_a_random_string_of_more_than_twenty_chars_and_configure_this'
##
## Local (Storage Provider)
##
## This stores the data in a SQLite3 Database.
## This is only recommended for lightweight non-stateful installations.
##
## Important: Kubernetes (or HA) users must read https://www.authelia.com/t/statelessness
##
# local:
## Path to the SQLite3 Database.
# path: '/config/db.sqlite3'
##
## MySQL / MariaDB (Storage Provider)
##
# mysql:
## The address of the MySQL server to connect to in the address common syntax.
## Format: [<scheme>://]<hostname>[:<port>].
## Square brackets indicate optional portions of the format. Scheme must be 'tcp', 'tcp4', 'tcp6', or 'unix`.
## The default scheme is 'unix' if the address is an absolute path otherwise it's 'tcp'. The default port is '3306'.
# address: 'tcp://127.0.0.1:3306'
## The database name to use.
# database: 'authelia'
## The username used for SQL authentication.
# username: 'authelia'
## The password used for SQL authentication.
## Can also be set using a secret: https://www.authelia.com/c/secrets
# password: 'mypassword'
## The connection timeout in the duration common syntax.
# timeout: '5 seconds'
## MySQL TLS settings. Configuring this requires TLS.
# tls:
## The server subject name to check the servers certificate against during the validation process.
## This option is not required if the certificate has a SAN which matches the address options hostname.
# server_name: 'mysql.example.com'
## Skip verifying the server certificate entirely. In preference to setting this we strongly recommend you add the
## certificate or the certificate of the authority signing the certificate to the certificates directory which is
## defined by the `certificates_directory` option at the top of the configuration.
## It's important to note the public key should be added to the directory, not the private key.
## This option is strongly discouraged but may be useful in some self-signed situations where validation is not
## important to the administrator.
# skip_verify: false
## Minimum TLS version for the connection.
# minimum_version: 'TLS1.2'
## Maximum TLS version for the connection.
# maximum_version: 'TLS1.3'
## The certificate chain used with the private_key if the server requests TLS Client Authentication
## i.e. Mutual TLS.
# certificate_chain: |
# -----BEGIN CERTIFICATE-----
# ...
# -----END CERTIFICATE-----
# -----BEGIN CERTIFICATE-----
# ...
# -----END CERTIFICATE-----
## The private key used with the certificate_chain if the server requests TLS Client Authentication
## i.e. Mutual TLS.
# private_key: |
# -----BEGIN RSA PRIVATE KEY-----
# ...
# -----END RSA PRIVATE KEY-----
##
## PostgreSQL (Storage Provider)
##
# postgres:
## The address of the PostgreSQL server to connect to in the address common syntax.
## Format: [<scheme>://]<hostname>[:<port>].
## Square brackets indicate optional portions of the format. Scheme must be 'tcp', 'tcp4', 'tcp6', or 'unix`.
## The default scheme is 'unix' if the address is an absolute path otherwise it's 'tcp'. The default port is '5432'.
# address: 'tcp://127.0.0.1:5432'
## The database name to use.
# database: 'authelia'
## The schema name to use.
# schema: 'public'
## The username used for SQL authentication.
# username: 'authelia'
## The password used for SQL authentication.
## Can also be set using a secret: https://www.authelia.com/c/secrets
# password: 'mypassword'
## The connection timeout in the duration common syntax.
# timeout: '5 seconds'
## PostgreSQL TLS settings. Configuring this requires TLS.
# tls:
## The server subject name to check the servers certificate against during the validation process.
## This option is not required if the certificate has a SAN which matches the address options hostname.
# server_name: 'postgres.example.com'
## Skip verifying the server certificate entirely. In preference to setting this we strongly recommend you add the
## certificate or the certificate of the authority signing the certificate to the certificates directory which is
## defined by the `certificates_directory` option at the top of the configuration.
## It's important to note the public key should be added to the directory, not the private key.
## This option is strongly discouraged but may be useful in some self-signed situations where validation is not
## important to the administrator.
# skip_verify: false
## Minimum TLS version for the connection.
# minimum_version: 'TLS1.2'
## Maximum TLS version for the connection.
# maximum_version: 'TLS1.3'
## The certificate chain used with the private_key if the server requests TLS Client Authentication
## i.e. Mutual TLS.
# certificate_chain: |
# -----BEGIN CERTIFICATE-----
# ...
# -----END CERTIFICATE-----
# -----BEGIN CERTIFICATE-----
# ...
# -----END CERTIFICATE-----
## The private key used with the certificate_chain if the server requests TLS Client Authentication
## i.e. Mutual TLS.
# private_key: |
# -----BEGIN RSA PRIVATE KEY-----
# ...
# -----END RSA PRIVATE KEY-----
##
## Notification Provider
##
## Notifications are sent to users when they require a password reset, a WebAuthn registration or a TOTP registration.
## The available providers are: filesystem, smtp. You must use only one of these providers.
# notifier:
## You can disable the notifier startup check by setting this to true.
# disable_startup_check: false
##
## File System (Notification Provider)
##
## Important: Kubernetes (or HA) users must read https://www.authelia.com/t/statelessness
##
# filesystem:
# filename: '/config/notification.txt'
##
## SMTP (Notification Provider)
##
## Use a SMTP server for sending notifications. Authelia uses the PLAIN or LOGIN methods to authenticate.
## [Security] By default Authelia will:
## - force all SMTP connections over TLS including unauthenticated connections
## - use the disable_require_tls boolean value to disable this requirement
## (only works for unauthenticated connections)
## - validate the SMTP server x509 certificate during the TLS handshake against the hosts trusted certificates
## (configure in tls section)
# smtp:
## The address of the SMTP server to connect to in the address common syntax.
# address: 'smtp://127.0.0.1:25'
## The connection timeout in the duration common syntax.
# timeout: '5 seconds'
## The username used for SMTP authentication.
# username: 'test'
## The password used for SMTP authentication.
## Can also be set using a secret: https://www.authelia.com/c/secrets
# password: 'password'
## The sender is used to is used for the MAIL FROM command and the FROM header.
## If this is not defined and the username is an email, we use the username as this value. This can either be just
## an email address or the RFC5322 'Name <email address>' format.
# sender: 'Authelia <admin@example.com>'
## HELO/EHLO Identifier. Some SMTP Servers may reject the default of localhost.
# identifier: 'localhost'
## Subject configuration of the emails sent. {title} is replaced by the text from the notifier.
# subject: '[Authelia] {title}'
## This address is used during the startup check to verify the email configuration is correct.
## It's not important what it is except if your email server only allows local delivery.
# startup_check_address: 'test@authelia.com'
## By default we require some form of TLS. This disables this check though is not advised.
# disable_require_tls: false
## Disables sending HTML formatted emails.
# disable_html_emails: false
# tls:
## The server subject name to check the servers certificate against during the validation process.
## This option is not required if the certificate has a SAN which matches the address options hostname.
# server_name: 'smtp.example.com'
## Skip verifying the server certificate entirely. In preference to setting this we strongly recommend you add the
## certificate or the certificate of the authority signing the certificate to the certificates directory which is
## defined by the `certificates_directory` option at the top of the configuration.
## It's important to note the public key should be added to the directory, not the private key.
## This option is strongly discouraged but may be useful in some self-signed situations where validation is not
## important to the administrator.
# skip_verify: false
## Minimum TLS version for the connection.
# minimum_version: 'TLS1.2'
## Maximum TLS version for the connection.
# maximum_version: 'TLS1.3'
## The certificate chain used with the private_key if the server requests TLS Client Authentication
## i.e. Mutual TLS.
# certificate_chain: |
# -----BEGIN CERTIFICATE-----
# ...
# -----END CERTIFICATE-----
# -----BEGIN CERTIFICATE-----
# ...
# -----END CERTIFICATE-----
## The private key used with the certificate_chain if the server requests TLS Client Authentication
## i.e. Mutual TLS.
# private_key: |
# -----BEGIN RSA PRIVATE KEY-----
# ...
# -----END RSA PRIVATE KEY-----
##
## Identity Providers
##
# identity_providers:
##
## OpenID Connect (Identity Provider)
##
## It's recommended you read the documentation before configuration of this section.
## See: https://www.authelia.com/c/oidc/provider
# oidc:
## The hmac_secret is used to sign OAuth2 tokens (authorization code, access tokens and refresh tokens).
## HMAC Secret can also be set using a secret: https://www.authelia.com/c/secrets
# hmac_secret: 'this_is_a_secret_abc123abc123abc'
## The JWK's issuer option configures multiple JSON Web Keys. It's required that at least one of the JWK's
## configured has the RS256 algorithm. For RSA keys (RS or PS) the minimum is a 2048 bit key.
# jwks:
# -
## Key ID embedded into the JWT header for key matching. Must be an alphanumeric string with 7 or less characters.
## This value is automatically generated if not provided. It's recommended to not configure this.
# key_id: 'example'
## The key algorithm used with this key.
# algorithm: 'RS256'
## The key use expected with this key. Currently only 'sig' is supported.
# use: 'sig'
## Required Private Key in PEM DER form.
# key: |
# -----BEGIN RSA PRIVATE KEY-----
# ...
# -----END RSA PRIVATE KEY-----
## Optional matching certificate chain in PEM DER form that matches the key. All certificates within the chain
## must be valid and current, and from top to bottom each certificate must be signed by the subsequent one.
# certificate_chain: |
# -----BEGIN CERTIFICATE-----
# ...
# -----END CERTIFICATE-----
# -----BEGIN CERTIFICATE-----
# ...
# -----END CERTIFICATE-----
## Enables additional debug messages.
# enable_client_debug_messages: false
## SECURITY NOTICE: It's not recommended changing this option and values below 8 are strongly discouraged.
# minimum_parameter_entropy: 8
## SECURITY NOTICE: It's not recommended changing this option, and highly discouraged to have it set to 'never'
## for security reasons.
# enforce_pkce: 'public_clients_only'
## SECURITY NOTICE: It's not recommended changing this option. We encourage you to read the documentation and fully
## understanding it before enabling this option.
# enable_jwt_access_token_stateless_introspection: false
## The signing algorithm used for signing the discovery and metadata responses. An issuer JWK with a matching
## algorithm must be available when configured. Most clients completely ignore this and it has a performance cost.
# discovery_signed_response_alg: 'none'
## The signing key id used for signing the discovery and metadata responses. An issuer JWK with a matching key id
## must be available when configured. Most clients completely ignore this and it has a performance cost.
# discovery_signed_response_key_id: ''
## Authorization Policies which can be utilized by clients. The 'policy_name' is an arbitrary value that you pick
## which is utilized as the value for the 'authorization_policy' on the client.
# authorization_policies:
# policy_name:
# default_policy: 'two_factor'
# rules:
# - policy: 'one_factor'
# subject: 'group:services'
## The lifespans configure the expiration for these token types in the duration common syntax. In addition to this
## syntax the lifespans can be customized per-client.
# lifespans:
## Configures the default/fallback lifespan for given token types. This behaviour applies to all clients and all
## grant types but you can override this behaviour using the custom lifespans.
# access_token: '1 hour'
# authorize_code: '1 minute'
# id_token: '1 hour'
# refresh_token: '90 minutes'
## Cross-Origin Resource Sharing (CORS) settings.
# cors:
## List of endpoints in addition to the metadata endpoints to permit cross-origin requests on.
# endpoints:
# - 'authorization'
# - 'pushed-authorization-request'
# - 'token'
# - 'revocation'
# - 'introspection'
# - 'userinfo'
## List of allowed origins.
## Any origin with https is permitted unless this option is configured or the
## allowed_origins_from_client_redirect_uris option is enabled.
# allowed_origins:
# - 'https://example.com'
## Automatically adds the origin portion of all redirect URI's on all clients to the list of allowed_origins,
## provided they have the scheme http or https and do not have the hostname of localhost.
# allowed_origins_from_client_redirect_uris: false
## Clients is a list of registered clients and their configuration.
## It's recommended you read the documentation before configuration of a registered client.
## See: https://www.authelia.com/c/oidc/registered-clients
# clients:
# -
## The Client ID is the OAuth 2.0 and OpenID Connect 1.0 Client ID which is used to link an application to a
## configuration.
# client_id: 'myapp'
## The description to show to users when they end up on the consent screen. Defaults to the ID above.
# client_name: 'My Application'
## The client secret is a shared secret between Authelia and the consumer of this client.
# yamllint disable-line rule:line-length
# client_secret: '$pbkdf2-sha512$310000$c8p78n7pUMln0jzvd4aK4Q$JNRBzwAo0ek5qKn50cFzzvE9RXV88h1wJn5KGiHrD0YKtZaR/nCb2CJPOsKaPK0hjf.9yHxzQGZziziccp6Yng' # The digest of 'insecure_secret'.
## Sector Identifiers are occasionally used to generate pairwise subject identifiers. In most cases this is not
## necessary. It is critical to read the documentation for more information.
# sector_identifier_uri: 'https://example.com/sector.json'
## Sets the client to public. This should typically not be set, please see the documentation for usage.
# public: false
## Redirect URI's specifies a list of valid case-sensitive callbacks for this client.
# redirect_uris:
# - 'https://oidc.example.com:8080/oauth2/callback'
## Request URI's specifies a list of valid case-sensitive TLS-secured URIs for this client for use as
## URIs to fetch Request Objects.
# request_uris:
# - 'https://oidc.example.com:8080/oidc/request-object.jwk'
## Audience this client is allowed to request.
# audience: []
## Scopes this client is allowed to request.
# scopes:
# - 'openid'
# - 'groups'
# - 'email'
# - 'profile'
## Grant Types configures which grants this client can obtain.
## It's not recommended to define this unless you know what you're doing.
# grant_types:
# - 'authorization_code'
## Response Types configures which responses this client can be sent.
## It's not recommended to define this unless you know what you're doing.
# response_types:
# - 'code'
## Response Modes configures which response modes this client supports.
# response_modes:
# - 'form_post'
# - 'query'
## The policy to require for this client; one_factor or two_factor. Can also be the key names for the
## authorization policies section.
# authorization_policy: 'two_factor'
## The custom lifespan name to use for this client. This must be configured independent of the client before
## utilization. Custom lifespans are reusable similar to authorization policies.
# lifespan: ''
## The consent mode controls how consent is obtained.
# consent_mode: 'auto'
## This value controls the duration a consent on this client remains remembered when the consent mode is
## configured as 'auto' or 'pre-configured' in the duration common syntax.
# pre_configured_consent_duration: '1 week'
## Requires the use of Pushed Authorization Requests for this client when set to true.
# require_pushed_authorization_requests: false
## Enforces the use of PKCE for this client when set to true.
# require_pkce: false
## Enforces the use of PKCE for this client when configured, and enforces the specified challenge method.
## Options are 'plain' and 'S256'.
# pkce_challenge_method: 'S256'
## The permitted client authentication method for the Token Endpoint for this client.
## For confidential client types this value defaults to 'client_secret_basic' and for the public client types it
## defaults to 'none' per the specifications.
# token_endpoint_auth_method: 'client_secret_basic'
## The permitted client authentication signing algorithm for the Token Endpoint for this client when using
## the 'client_secret_jwt' or 'private_key_jwt' token_endpoint_auth_method.
# token_endpoint_auth_signing_alg: 'RS256'
## The signing algorithm which must be used for request objects. A client JWK with a matching algorithm must be
## available if configured.
# request_object_signing_alg: 'RS256'
## The signing algorithm used for signing the authorization response. An issuer JWK with a matching algorithm
## must be available when configured. Configuring this value enables the JWT Secured Authorization Response
## Mode (JARM) for this client. JARM is not understood by a majority of clients so you should only configure
## this when you know it's supported.
## Has no effect if authorization_signed_response_key_id is configured.
# authorization_signed_response_alg: 'none'
## The signing key id used for signing the authorization response. An issuer JWK with a matching key id must be
## available when configured. Configuring this value enables the JWT Secured Authorization Response Mode (JARM)
## for this client. JARM is not understood by a majority of clients so you should only configure this when you
## know it's supported.
# authorization_signed_response_key_id: ''
## The signing algorithm used for ID Tokens. An issuer JWK with a matching algorithm must be available when
## configured. Has no effect if id_token_signed_response_key_id is configured.
# id_token_signed_response_alg: 'RS256'
## The signing key id used for ID Tokens. An issuer JWK with a matching key id must be available when
## configured.
# id_token_signed_response_key_id: ''
## The signing algorithm used for Access Tokens. An issuer JWK with a matching algorithm must be available.
## Has no effect if access_token_signed_response_key_id is configured. Values other than 'none' enable RFC9068
## for this client.
# access_token_signed_response_alg: 'none'
## The signing key id used for Access Tokens. An issuer JWK with a matching key id must be available when
## configured. Values other than a blank value enable RFC9068 for this client.
# access_token_signed_response_key_id: ''
## The signing algorithm used for User Info responses. An issuer JWK with a matching algorithm must be
## available. Has no effect if userinfo_signing_key_id is configured.
# userinfo_signed_response_alg: 'none'
## The signing key id used for User Info responses. An issuer JWK with a matching key id must be available when
## configured.
# userinfo_signed_response_key_id: ''
## The signing algorithm used for Introspection responses. An issuer JWK with a matching algorithm must be
## available when configured. Has no effect if introspection_signed_response_key_id is configured.
# introspection_signed_response_alg: 'none'
## The signing key id used for Introspection responses. An issuer JWK with a matching key id must be available
## when configured.
# introspection_signed_response_key_id: ''
## Trusted public keys configuration for request object signing for things such as 'private_key_jwt'.
## URL of the HTTPS endpoint which serves the keys. Please note the 'jwks_uri' and the 'jwks' option below
## are mutually exclusive.
# jwks_uri: 'https://app.example.com/jwks.json'
## Trusted public keys configuration for request object signing for things such as 'private_key_jwt'.
## List of JWKs known and registered with this client. It's recommended to use the 'jwks_uri' option if
## available due to key rotation. Please note the 'jwks' and the 'jwks_uri' option above are mutually exclusive.
# jwks:
# -
## Key ID used to match the JWT's to an individual identifier. This option is required if configured.
# key_id: 'example'
## The key algorithm expected with this key.
# algorithm: 'RS256'
## The key use expected with this key. Currently only 'sig' is supported.
# use: 'sig'
## Required Public Key in PEM DER form.
# key: |
# -----BEGIN RSA PUBLIC KEY-----
# ...
# -----END RSA PUBLIC KEY-----
## The matching certificate chain in PEM DER form that matches the key if available.
# certificate_chain: |
# -----BEGIN CERTIFICATE-----
# ...
# -----END CERTIFICATE-----
# -----BEGIN CERTIFICATE-----
# ...
# -----END CERTIFICATE-----
...
Reference in New Issue View Git Blame Copy Permalink