linux/drivers/s390
Linus Torvalds 1b294a1f35 Networking changes for 6.10.
Core & protocols
 ----------------
 
  - Complete rework of garbage collection of AF_UNIX sockets.
    AF_UNIX is prone to forming reference count cycles due to fd passing
    functionality. New method based on Tarjan's Strongly Connected Components
    algorithm should be both faster and remove a lot of workarounds
    we accumulated over the years.
 
  - Add TCP fraglist GRO support, allowing chaining multiple TCP packets
    and forwarding them together. Useful for small switches / routers which
    lack basic checksum offload in some scenarios (e.g. PPPoE).
 
  - Support using SMP threads for handling packet backlog i.e. packet
    processing from software interfaces and old drivers which don't
    use NAPI. This helps move the processing out of the softirq jumble.
 
  - Continue work of converting from rtnl lock to RCU protection.
    Don't require rtnl lock when reading: IPv6 routing FIB, IPv6 address
    labels, netdev threaded NAPI sysfs files, bonding driver's sysfs files,
    MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics, TC Qdiscs,
    neighbor entries, ARP entries via ioctl(SIOCGARP), a lot of the link
    information available via rtnetlink.
 
  - Small optimizations from Eric to UDP wake up handling, memory accounting,
    RPS/RFS implementation, TCP packet sizing etc.
 
  - Allow direct page recycling in the bulk API used by XDP, for +2% PPS.
 
  - Support peek with an offset on TCP sockets.
 
  - Add MPTCP APIs for querying last time packets were received/sent/acked,
    and whether MPTCP "upgrade" succeeded on a TCP socket.
 
  - Add intra-node communication shortcut to improve SMC performance.
 
  - Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol driver.
 
  - Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
 
  - Add reset reasons for tracing what caused a TCP reset to be sent.
 
  - Introduce direction attribute for xfrm (IPSec) states.
    State can be used either for input or output packet processing.
 
 Things we sprinkled into general kernel code
 --------------------------------------------
 
  - Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
    This required touch-ups and renaming of a few existing users.
 
  - Add Endian-dependent __counted_by_{le,be} annotations.
 
  - Make building selftests "quieter" by printing summaries like
    "CC object.o" rather than full commands with all the arguments.
 
 Netfilter
 ---------
 
  - Use GFP_KERNEL to clone elements, to deal better with OOM situations
    and avoid failures in the .commit step.
 
 BPF
 ---
 
  - Add eBPF JIT for ARCv2 CPUs.
 
  - Support attaching kprobe BPF programs through kprobe_multi link in
    a session mode, meaning, a BPF program is attached to both function entry
    and return, the entry program can decide if the return program gets
    executed and the entry program can share u64 cookie value with return
    program. "Session mode" is a common use-case for tetragon and bpftrace.
 
  - Add the ability to specify and retrieve BPF cookie for raw tracepoint
    programs in order to ease migration from classic to raw tracepoints.
 
  - Add an internal-only BPF per-CPU instruction for resolving per-CPU
    memory addresses and implement support in x86, ARM64 and RISC-V JITs.
    This allows inlining functions which need to access per-CPU state.
 
  - Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
    atomics in bpf_arena which can be JITed as a single x86 instruction.
    Support BPF arena on ARM64.
 
  - Add a new bpf_wq API for deferring events and refactor process-context
    bpf_timer code to keep common code where possible.
 
  - Harden the BPF verifier's and/or/xor value tracking.
 
  - Introduce crypto kfuncs to let BPF programs call kernel crypto APIs.
 
  - Support bpf_tail_call_static() helper for BPF programs with GCC 13.
 
  - Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
    program to have code sections where preemption is disabled.
 
 Driver API
 ----------
 
  - Skip software TC processing completely if all installed rules are
    marked as HW-only, instead of checking the HW-only flag rule by rule.
 
  - Add support for configuring PoE (Power over Ethernet), similar to
    the already existing support for PoDL (Power over Data Line) config.
 
  - Initial bits of a queue control API, for now allowing a single queue
    to be reset without disturbing packet flow to other queues.
 
  - Common (ethtool) statistics for hardware timestamping.
 
 Tests and tooling
 -----------------
 
  - Remove the need to create a config file to run the net forwarding tests
    so that a naive "make run_tests" can exercise them.
 
  - Define a method of writing tests which require an external endpoint
    to communicate with (to send/receive data towards the test machine).
    Add a few such tests.
 
  - Create a shared code library for writing Python tests. Expose the YAML
    Netlink library from tools/ to the tests for easy Netlink access.
 
  - Move netfilter tests under net/, extend them, separate performance tests
    from correctness tests, and iron out issues found by running them
    "on every commit".
 
  - Refactor BPF selftests to use common network helpers.
 
  - Further work filling in YAML definitions of Netlink messages for:
    nftables, team driver, bonding interfaces, vlan interfaces, VF info,
    TC u32 mark, TC police action.
 
  - Teach Python YAML Netlink to decode attribute policies.
 
  - Extend the definition of the "indexed array" construct in the specs
    to cover arrays of scalars rather than just nests.
 
  - Add hyperlinks between definitions in generated Netlink docs.
 
 Drivers
 -------
 
  - Make sure unsupported flower control flags are rejected by drivers,
    and make more drivers report errors directly to the application rather
    than dmesg (large number of driver changes from Asbjørn Sloth Tønnesen).
 
  - Ethernet high-speed NICs:
    - Broadcom (bnxt):
      - support multiple RSS contexts and steering traffic to them
      - support XDP metadata
      - make page pool allocations more NUMA aware
    - Intel (100G, ice, idpf):
      - extract datapath code common among Intel drivers into a library
      - use fewer resources in switchdev by sharing queues with the PF
      - add PFCP filter support
      - add Ethernet filter support
      - use a spinlock instead of HW lock in PTP clock ops
      - support 5 layer Tx scheduler topology
    - nVidia/Mellanox:
      - 800G link modes and 100G SerDes speeds
      - per-queue IRQ coalescing configuration
    - Marvell Octeon:
      - support offloading TC packet mark action
 
  - Ethernet NICs consumer, embedded and virtual:
    - stop lying about skb->truesize in USB Ethernet drivers, it messes up
      TCP memory calculations
    - Google cloud vNIC:
      - support changing ring size via ethtool
      - support ring reset using the queue control API
    - VirtIO net:
      - expose flow hash from RSS to XDP
      - per-queue statistics
      - add selftests
    - Synopsys (stmmac):
      - support controllers which require an RX clock signal from the MII
        bus to perform their hardware initialization
    - TI:
      - icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
      - icssg_prueth: add SW TX / RX Coalescing based on hrtimers
      - cpsw: minimal XDP support
    - Renesas (ravb):
      - support describing the MDIO bus
    - Realtek (r8169):
      - add support for RTL8168M
    - Microchip Sparx5:
      - matchall and flower actions mirred and redirect
 
  - Ethernet switches:
    - nVidia/Mellanox:
      - improve events processing performance
    - Marvell:
      - add support for MV88E6250 family internal PHYs
    - Microchip:
      - add DCB and DSCP mapping support for KSZ switches
      - vsc73xx: convert to PHYLINK
    - Realtek:
      - rtl8226b/rtl8221b: add C45 instances and SerDes switching
 
  - Many driver changes related to PHYLIB and PHYLINK deprecated API cleanup.
 
  - Ethernet PHYs:
    - Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
    - micrel: lan8814: add support for PPS out and external timestamp trigger
 
  - WiFi:
    - Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices drivers.
      Modern devices can only be configured using nl80211.
    - mac80211/cfg80211
      - handle color change per link for WiFi 7 Multi-Link Operation
    - Intel (iwlwifi):
      - don't support puncturing in 5 GHz
      - support monitor mode on passive channels
      - BZ-W device support
      - P2P with HE/EHT support
      - re-add support for firmware API 90
      - provide channel survey information for Automatic Channel Selection
    - MediaTek (mt76):
      - mt7921 LED control
      - mt7925 EHT radiotap support
      - mt7920e PCI support
    - Qualcomm (ath11k):
      - P2P support for QCA6390, WCN6855 and QCA2066
      - support hibernation
      - ieee80211-freq-limit Device Tree property support
    - Qualcomm (ath12k):
      - refactoring in preparation of multi-link support
      - suspend and hibernation support
      - ACPI support
      - debugfs support, including dfs_simulate_radar support
    - RealTek:
      - rtw88: RTL8723CS SDIO device support
      - rtw89: RTL8922AE Wi-Fi 7 PCI device support
      - rtw89: complete features of new WiFi 7 chip 8922AE including
        BT-coexistence and Wake-on-WLAN
      - rtw89: use BIOS ACPI settings to set TX power and channels
      - rtl8xxxu: enable Management Frame Protection (MFP) support
 
  - Bluetooth:
    - support for Intel BlazarI and Filmore Peak2 (BE201)
    - support for MediaTek MT7921S SDIO
    - initial support for Intel PCIe BT driver
    - remove HCI_AMP support
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmZD6sQACgkQMUZtbf5S
 IrtLYw/+I73ePGIye37o2jpbodcLAUZVfF3r6uYUzK8hokEcKD0QVJa9w7PizLZ3
 UO45ClOXFLJCkfP4reFenLfxGCel2AJI+F7VFl2xaO2XgrcH/lnVrHqKZEAEXjls
 KoYMnShIolv7h2MKP6hHtyTi2j1wvQUKsZC71o9/fuW+4fUT8gECx1YtYcL73wrw
 gEMdlUgBYC3jiiCUHJIFX6iPJ2t/TC+q1eIIF2K/Osrk2kIqQhzoozcL4vpuAZQT
 99ljx/qRelXa8oppDb7nM5eulg7WY8ZqxEfFZphTMC5nLEGzClxuOTTl2kDYI/D/
 UZmTWZDY+F5F0xvNk2gH84qVJXBOVDoobpT7hVA/tDuybobc/kvGDzRayEVqVzKj
 Q0tPlJs+xBZpkK5TVnxaFLJVOM+p1Xosxy3kNVXmuYNBvT/R89UbJiCrUKqKZF+L
 z/1mOYUv8UklHqYAeuJSptHvqJjTGa/fsEYP7dAUBbc1N2eVB8mzZ4mgU5rYXbtC
 E6UXXiWnoSRm8bmco9QmcWWoXt5UGEizHSJLz6t1R5Df/YmXhWlytll5aCwY1ksf
 FNoL7S4u7AZThL1Nwi7yUs4CAjhk/N4aOsk+41S0sALCx30BJuI6UdesAxJ0lu+Z
 fwCQYbs27y4p7mBLbkYwcQNxAxGm7PSK4yeyRIy2njiyV4qnLf8=
 =EsC2
 -----END PGP SIGNATURE-----

Merge tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Complete rework of garbage collection of AF_UNIX sockets.

     AF_UNIX is prone to forming reference count cycles due to fd
     passing functionality. New method based on Tarjan's Strongly
     Connected Components algorithm should be both faster and remove a
     lot of workarounds we accumulated over the years.

   - Add TCP fraglist GRO support, allowing chaining multiple TCP
     packets and forwarding them together. Useful for small switches /
     routers which lack basic checksum offload in some scenarios (e.g.
     PPPoE).

   - Support using SMP threads for handling packet backlog i.e. packet
     processing from software interfaces and old drivers which don't use
     NAPI. This helps move the processing out of the softirq jumble.

   - Continue work of converting from rtnl lock to RCU protection.

     Don't require rtnl lock when reading: IPv6 routing FIB, IPv6
     address labels, netdev threaded NAPI sysfs files, bonding driver's
     sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics,
     TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot
     of the link information available via rtnetlink.

   - Small optimizations from Eric to UDP wake up handling, memory
     accounting, RPS/RFS implementation, TCP packet sizing etc.

   - Allow direct page recycling in the bulk API used by XDP, for +2%
     PPS.

   - Support peek with an offset on TCP sockets.

   - Add MPTCP APIs for querying last time packets were received/sent/acked
     and whether MPTCP "upgrade" succeeded on a TCP socket.

   - Add intra-node communication shortcut to improve SMC performance.

   - Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol
     driver.

   - Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.

   - Add reset reasons for tracing what caused a TCP reset to be sent.

   - Introduce direction attribute for xfrm (IPSec) states. State can be
     used either for input or output packet processing.

  Things we sprinkled into general kernel code:

   - Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().

     This required touch-ups and renaming of a few existing users.

   - Add Endian-dependent __counted_by_{le,be} annotations.

   - Make building selftests "quieter" by printing summaries like
     "CC object.o" rather than full commands with all the arguments.

  Netfilter:

   - Use GFP_KERNEL to clone elements, to deal better with OOM
     situations and avoid failures in the .commit step.

  BPF:

   - Add eBPF JIT for ARCv2 CPUs.

   - Support attaching kprobe BPF programs through kprobe_multi link in
     a session mode, meaning, a BPF program is attached to both function
     entry and return, the entry program can decide if the return
     program gets executed and the entry program can share u64 cookie
     value with return program. "Session mode" is a common use-case for
     tetragon and bpftrace.

   - Add the ability to specify and retrieve BPF cookie for raw
     tracepoint programs in order to ease migration from classic to raw
     tracepoints.

   - Add an internal-only BPF per-CPU instruction for resolving per-CPU
     memory addresses and implement support in x86, ARM64 and RISC-V
     JITs. This allows inlining functions which need to access per-CPU
     state.

   - Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
     atomics in bpf_arena which can be JITed as a single x86
     instruction. Support BPF arena on ARM64.

   - Add a new bpf_wq API for deferring events and refactor
     process-context bpf_timer code to keep common code where possible.

   - Harden the BPF verifier's and/or/xor value tracking.

   - Introduce crypto kfuncs to let BPF programs call kernel crypto
     APIs.

   - Support bpf_tail_call_static() helper for BPF programs with GCC 13.

   - Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
     program to have code sections where preemption is disabled.

  Driver API:

   - Skip software TC processing completely if all installed rules are
     marked as HW-only, instead of checking the HW-only flag rule by
     rule.

   - Add support for configuring PoE (Power over Ethernet), similar to
     the already existing support for PoDL (Power over Data Line)
     config.

   - Initial bits of a queue control API, for now allowing a single
     queue to be reset without disturbing packet flow to other queues.

   - Common (ethtool) statistics for hardware timestamping.

  Tests and tooling:

   - Remove the need to create a config file to run the net forwarding
     tests so that a naive "make run_tests" can exercise them.

   - Define a method of writing tests which require an external endpoint
     to communicate with (to send/receive data towards the test
     machine). Add a few such tests.

   - Create a shared code library for writing Python tests. Expose the
     YAML Netlink library from tools/ to the tests for easy Netlink
     access.

   - Move netfilter tests under net/, extend them, separate performance
     tests from correctness tests, and iron out issues found by running
     them "on every commit".

   - Refactor BPF selftests to use common network helpers.

   - Further work filling in YAML definitions of Netlink messages for:
     nftables, team driver, bonding interfaces, vlan interfaces, VF
     info, TC u32 mark, TC police action.

   - Teach Python YAML Netlink to decode attribute policies.

   - Extend the definition of the "indexed array" construct in the specs
     to cover arrays of scalars rather than just nests.

   - Add hyperlinks between definitions in generated Netlink docs.

  Drivers:

   - Make sure unsupported flower control flags are rejected by drivers,
     and make more drivers report errors directly to the application
     rather than dmesg (large number of driver changes from Asbjørn
     Sloth Tønnesen).

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support multiple RSS contexts and steering traffic to them
         - support XDP metadata
         - make page pool allocations more NUMA aware
      - Intel (100G, ice, idpf):
         - extract datapath code common among Intel drivers into a library
         - use fewer resources in switchdev by sharing queues with the PF
         - add PFCP filter support
         - add Ethernet filter support
         - use a spinlock instead of HW lock in PTP clock ops
         - support 5 layer Tx scheduler topology
      - nVidia/Mellanox:
         - 800G link modes and 100G SerDes speeds
         - per-queue IRQ coalescing configuration
      - Marvell Octeon:
         - support offloading TC packet mark action

   - Ethernet NICs consumer, embedded and virtual:
      - stop lying about skb->truesize in USB Ethernet drivers, it
        messes up TCP memory calculations
      - Google cloud vNIC:
         - support changing ring size via ethtool
         - support ring reset using the queue control API
      - VirtIO net:
         - expose flow hash from RSS to XDP
         - per-queue statistics
         - add selftests
      - Synopsys (stmmac):
         - support controllers which require an RX clock signal from the
           MII bus to perform their hardware initialization
      - TI:
         - icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
         - icssg_prueth: add SW TX / RX Coalescing based on hrtimers
         - cpsw: minimal XDP support
      - Renesas (ravb):
         - support describing the MDIO bus
      - Realtek (r8169):
         - add support for RTL8168M
      - Microchip Sparx5:
         - matchall and flower actions mirred and redirect

   - Ethernet switches:
      - nVidia/Mellanox:
         - improve events processing performance
      - Marvell:
         - add support for MV88E6250 family internal PHYs
      - Microchip:
         - add DCB and DSCP mapping support for KSZ switches
         - vsc73xx: convert to PHYLINK
      - Realtek:
         - rtl8226b/rtl8221b: add C45 instances and SerDes switching

   - Many driver changes related to PHYLIB and PHYLINK deprecated API
     cleanup

   - Ethernet PHYs:
      - Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
      - micrel: lan8814: add support for PPS out and external timestamp trigger

   - WiFi:
      - Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices
        drivers. Modern devices can only be configured using nl80211.
      - mac80211/cfg80211
         - handle color change per link for WiFi 7 Multi-Link Operation
      - Intel (iwlwifi):
         - don't support puncturing in 5 GHz
         - support monitor mode on passive channels
         - BZ-W device support
         - P2P with HE/EHT support
         - re-add support for firmware API 90
         - provide channel survey information for Automatic Channel Selection
      - MediaTek (mt76):
         - mt7921 LED control
         - mt7925 EHT radiotap support
         - mt7920e PCI support
      - Qualcomm (ath11k):
         - P2P support for QCA6390, WCN6855 and QCA2066
         - support hibernation
         - ieee80211-freq-limit Device Tree property support
      - Qualcomm (ath12k):
         - refactoring in preparation of multi-link support
         - suspend and hibernation support
         - ACPI support
         - debugfs support, including dfs_simulate_radar support
      - RealTek:
         - rtw88: RTL8723CS SDIO device support
         - rtw89: RTL8922AE Wi-Fi 7 PCI device support
         - rtw89: complete features of new WiFi 7 chip 8922AE including
           BT-coexistence and Wake-on-WLAN
         - rtw89: use BIOS ACPI settings to set TX power and channels
         - rtl8xxxu: enable Management Frame Protection (MFP) support

   - Bluetooth:
      - support for Intel BlazarI and Filmore Peak2 (BE201)
      - support for MediaTek MT7921S SDIO
      - initial support for Intel PCIe BT driver
      - remove HCI_AMP support"

* tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits)
  selftests: netfilter: fix packetdrill conntrack testcase
  net: gro: fix napi_gro_cb zeroed alignment
  Bluetooth: btintel_pcie: Refactor and code cleanup
  Bluetooth: btintel_pcie: Fix warning reported by sparse
  Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
  Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
  Bluetooth: btintel_pcie: Fix compiler warnings
  Bluetooth: btintel_pcie: Add *setup* function to download firmware
  Bluetooth: btintel_pcie: Add support for PCIe transport
  Bluetooth: btintel: Export few static functions
  Bluetooth: HCI: Remove HCI_AMP support
  Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
  Bluetooth: qca: Fix error code in qca_read_fw_build_info()
  Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
  Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
  Bluetooth: btintel: Add support for BlazarI
  LE Create Connection command timeout increased to 20 secs
  dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
  Bluetooth: compute LE flow credits based on recvbuf space
  Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
  ...
2024-05-14 19:42:24 -07:00
..
block scsi: block: Remove now unused queue limits helpers 2024-04-12 06:32:01 -04:00
char - Store AP Query Configuration Information in a static buffer 2024-05-13 08:33:52 -07:00
cio Networking changes for 6.10. 2024-05-14 19:42:24 -07:00
crypto - Store AP Query Configuration Information in a static buffer 2024-05-13 08:33:52 -07:00
net net: annotate writes on dev->mtu from ndo_change_mtu() 2024-05-07 16:19:14 -07:00
scsi s390/zfcp: use new address translation helpers 2024-03-13 09:23:48 +01:00
virtio s390/virtio_ccw: avoid converting dma addresses / handles 2024-03-13 09:23:46 +01:00
Makefile