pulumi/pkg/resource/deploy/providers/registry_test.go

985 lines
27 KiB
Go
Raw Permalink Normal View History

// Copyright 2016-2023, Pulumi Corporation.
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package providers
import (
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
"context"
"errors"
2019-10-22 07:20:26 +00:00
"fmt"
"net/http"
"net/http/httptest"
"sync"
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
"testing"
"github.com/blang/semver"
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
"github.com/stretchr/testify/assert"
"github.com/pulumi/pulumi/sdk/v3/go/common/apitype"
"github.com/pulumi/pulumi/sdk/v3/go/common/diag"
"github.com/pulumi/pulumi/sdk/v3/go/common/resource"
"github.com/pulumi/pulumi/sdk/v3/go/common/resource/plugin"
"github.com/pulumi/pulumi/sdk/v3/go/common/tokens"
"github.com/pulumi/pulumi/sdk/v3/go/common/workspace"
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
)
type testPluginHost struct {
t *testing.T
provider func(pkg tokens.Package, version *semver.Version) (plugin.Provider, error)
closeProvider func(provider plugin.Provider) error
}
func (host *testPluginHost) SignalCancellation() error {
return nil
}
all: Reformat with gofumpt Per team discussion, switching to gofumpt. [gofumpt][1] is an alternative, stricter alternative to gofmt. It addresses other stylistic concerns that gofmt doesn't yet cover. [1]: https://github.com/mvdan/gofumpt See the full list of [Added rules][2], but it includes: - Dropping empty lines around function bodies - Dropping unnecessary variable grouping when there's only one variable - Ensuring an empty line between multi-line functions - simplification (`-s` in gofmt) is always enabled - Ensuring multi-line function signatures end with `) {` on a separate line. [2]: https://github.com/mvdan/gofumpt#Added-rules gofumpt is stricter, but there's no lock-in. All gofumpt output is valid gofmt output, so if we decide we don't like it, it's easy to switch back without any code changes. gofumpt support is built into the tooling we use for development so this won't change development workflows. - golangci-lint includes a gofumpt check (enabled in this PR) - gopls, the LSP for Go, includes a gofumpt option (see [installation instrutions][3]) [3]: https://github.com/mvdan/gofumpt#installation This change was generated by running: ```bash gofumpt -w $(rg --files -g '*.go' | rg -v testdata | rg -v compilation_error) ``` The following files were manually tweaked afterwards: - pkg/cmd/pulumi/stack_change_secrets_provider.go: one of the lines overflowed and had comments in an inconvenient place - pkg/cmd/pulumi/destroy.go: `var x T = y` where `T` wasn't necessary - pkg/cmd/pulumi/policy_new.go: long line because of error message - pkg/backend/snapshot_test.go: long line trying to assign three variables in the same assignment I have included mention of gofumpt in the CONTRIBUTING.md.
2023-03-03 16:36:39 +00:00
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
func (host *testPluginHost) Close() error {
return nil
}
all: Reformat with gofumpt Per team discussion, switching to gofumpt. [gofumpt][1] is an alternative, stricter alternative to gofmt. It addresses other stylistic concerns that gofmt doesn't yet cover. [1]: https://github.com/mvdan/gofumpt See the full list of [Added rules][2], but it includes: - Dropping empty lines around function bodies - Dropping unnecessary variable grouping when there's only one variable - Ensuring an empty line between multi-line functions - simplification (`-s` in gofmt) is always enabled - Ensuring multi-line function signatures end with `) {` on a separate line. [2]: https://github.com/mvdan/gofumpt#Added-rules gofumpt is stricter, but there's no lock-in. All gofumpt output is valid gofmt output, so if we decide we don't like it, it's easy to switch back without any code changes. gofumpt support is built into the tooling we use for development so this won't change development workflows. - golangci-lint includes a gofumpt check (enabled in this PR) - gopls, the LSP for Go, includes a gofumpt option (see [installation instrutions][3]) [3]: https://github.com/mvdan/gofumpt#installation This change was generated by running: ```bash gofumpt -w $(rg --files -g '*.go' | rg -v testdata | rg -v compilation_error) ``` The following files were manually tweaked afterwards: - pkg/cmd/pulumi/stack_change_secrets_provider.go: one of the lines overflowed and had comments in an inconvenient place - pkg/cmd/pulumi/destroy.go: `var x T = y` where `T` wasn't necessary - pkg/cmd/pulumi/policy_new.go: long line because of error message - pkg/backend/snapshot_test.go: long line trying to assign three variables in the same assignment I have included mention of gofumpt in the CONTRIBUTING.md.
2023-03-03 16:36:39 +00:00
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
func (host *testPluginHost) ServerAddr() string {
host.t.Fatalf("Host RPC address not available")
return ""
}
all: Reformat with gofumpt Per team discussion, switching to gofumpt. [gofumpt][1] is an alternative, stricter alternative to gofmt. It addresses other stylistic concerns that gofmt doesn't yet cover. [1]: https://github.com/mvdan/gofumpt See the full list of [Added rules][2], but it includes: - Dropping empty lines around function bodies - Dropping unnecessary variable grouping when there's only one variable - Ensuring an empty line between multi-line functions - simplification (`-s` in gofmt) is always enabled - Ensuring multi-line function signatures end with `) {` on a separate line. [2]: https://github.com/mvdan/gofumpt#Added-rules gofumpt is stricter, but there's no lock-in. All gofumpt output is valid gofmt output, so if we decide we don't like it, it's easy to switch back without any code changes. gofumpt support is built into the tooling we use for development so this won't change development workflows. - golangci-lint includes a gofumpt check (enabled in this PR) - gopls, the LSP for Go, includes a gofumpt option (see [installation instrutions][3]) [3]: https://github.com/mvdan/gofumpt#installation This change was generated by running: ```bash gofumpt -w $(rg --files -g '*.go' | rg -v testdata | rg -v compilation_error) ``` The following files were manually tweaked afterwards: - pkg/cmd/pulumi/stack_change_secrets_provider.go: one of the lines overflowed and had comments in an inconvenient place - pkg/cmd/pulumi/destroy.go: `var x T = y` where `T` wasn't necessary - pkg/cmd/pulumi/policy_new.go: long line because of error message - pkg/backend/snapshot_test.go: long line trying to assign three variables in the same assignment I have included mention of gofumpt in the CONTRIBUTING.md.
2023-03-03 16:36:39 +00:00
func (host *testPluginHost) Log(sev diag.Severity, urn resource.URN, msg string, streamID int32) {
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
host.t.Logf("[%v] %v@%v: %v", sev, urn, streamID, msg)
}
all: Reformat with gofumpt Per team discussion, switching to gofumpt. [gofumpt][1] is an alternative, stricter alternative to gofmt. It addresses other stylistic concerns that gofmt doesn't yet cover. [1]: https://github.com/mvdan/gofumpt See the full list of [Added rules][2], but it includes: - Dropping empty lines around function bodies - Dropping unnecessary variable grouping when there's only one variable - Ensuring an empty line between multi-line functions - simplification (`-s` in gofmt) is always enabled - Ensuring multi-line function signatures end with `) {` on a separate line. [2]: https://github.com/mvdan/gofumpt#Added-rules gofumpt is stricter, but there's no lock-in. All gofumpt output is valid gofmt output, so if we decide we don't like it, it's easy to switch back without any code changes. gofumpt support is built into the tooling we use for development so this won't change development workflows. - golangci-lint includes a gofumpt check (enabled in this PR) - gopls, the LSP for Go, includes a gofumpt option (see [installation instrutions][3]) [3]: https://github.com/mvdan/gofumpt#installation This change was generated by running: ```bash gofumpt -w $(rg --files -g '*.go' | rg -v testdata | rg -v compilation_error) ``` The following files were manually tweaked afterwards: - pkg/cmd/pulumi/stack_change_secrets_provider.go: one of the lines overflowed and had comments in an inconvenient place - pkg/cmd/pulumi/destroy.go: `var x T = y` where `T` wasn't necessary - pkg/cmd/pulumi/policy_new.go: long line because of error message - pkg/backend/snapshot_test.go: long line trying to assign three variables in the same assignment I have included mention of gofumpt in the CONTRIBUTING.md.
2023-03-03 16:36:39 +00:00
func (host *testPluginHost) LogStatus(sev diag.Severity, urn resource.URN, msg string, streamID int32) {
host.t.Logf("[%v] %v@%v: %v", sev, urn, streamID, msg)
}
all: Reformat with gofumpt Per team discussion, switching to gofumpt. [gofumpt][1] is an alternative, stricter alternative to gofmt. It addresses other stylistic concerns that gofmt doesn't yet cover. [1]: https://github.com/mvdan/gofumpt See the full list of [Added rules][2], but it includes: - Dropping empty lines around function bodies - Dropping unnecessary variable grouping when there's only one variable - Ensuring an empty line between multi-line functions - simplification (`-s` in gofmt) is always enabled - Ensuring multi-line function signatures end with `) {` on a separate line. [2]: https://github.com/mvdan/gofumpt#Added-rules gofumpt is stricter, but there's no lock-in. All gofumpt output is valid gofmt output, so if we decide we don't like it, it's easy to switch back without any code changes. gofumpt support is built into the tooling we use for development so this won't change development workflows. - golangci-lint includes a gofumpt check (enabled in this PR) - gopls, the LSP for Go, includes a gofumpt option (see [installation instrutions][3]) [3]: https://github.com/mvdan/gofumpt#installation This change was generated by running: ```bash gofumpt -w $(rg --files -g '*.go' | rg -v testdata | rg -v compilation_error) ``` The following files were manually tweaked afterwards: - pkg/cmd/pulumi/stack_change_secrets_provider.go: one of the lines overflowed and had comments in an inconvenient place - pkg/cmd/pulumi/destroy.go: `var x T = y` where `T` wasn't necessary - pkg/cmd/pulumi/policy_new.go: long line because of error message - pkg/backend/snapshot_test.go: long line trying to assign three variables in the same assignment I have included mention of gofumpt in the CONTRIBUTING.md.
2023-03-03 16:36:39 +00:00
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
func (host *testPluginHost) Analyzer(nm tokens.QName) (plugin.Analyzer, error) {
return nil, errors.New("unsupported")
}
all: Reformat with gofumpt Per team discussion, switching to gofumpt. [gofumpt][1] is an alternative, stricter alternative to gofmt. It addresses other stylistic concerns that gofmt doesn't yet cover. [1]: https://github.com/mvdan/gofumpt See the full list of [Added rules][2], but it includes: - Dropping empty lines around function bodies - Dropping unnecessary variable grouping when there's only one variable - Ensuring an empty line between multi-line functions - simplification (`-s` in gofmt) is always enabled - Ensuring multi-line function signatures end with `) {` on a separate line. [2]: https://github.com/mvdan/gofumpt#Added-rules gofumpt is stricter, but there's no lock-in. All gofumpt output is valid gofmt output, so if we decide we don't like it, it's easy to switch back without any code changes. gofumpt support is built into the tooling we use for development so this won't change development workflows. - golangci-lint includes a gofumpt check (enabled in this PR) - gopls, the LSP for Go, includes a gofumpt option (see [installation instrutions][3]) [3]: https://github.com/mvdan/gofumpt#installation This change was generated by running: ```bash gofumpt -w $(rg --files -g '*.go' | rg -v testdata | rg -v compilation_error) ``` The following files were manually tweaked afterwards: - pkg/cmd/pulumi/stack_change_secrets_provider.go: one of the lines overflowed and had comments in an inconvenient place - pkg/cmd/pulumi/destroy.go: `var x T = y` where `T` wasn't necessary - pkg/cmd/pulumi/policy_new.go: long line because of error message - pkg/backend/snapshot_test.go: long line trying to assign three variables in the same assignment I have included mention of gofumpt in the CONTRIBUTING.md.
2023-03-03 16:36:39 +00:00
func (host *testPluginHost) PolicyAnalyzer(name tokens.QName, path string,
all: Reformat with gofumpt Per team discussion, switching to gofumpt. [gofumpt][1] is an alternative, stricter alternative to gofmt. It addresses other stylistic concerns that gofmt doesn't yet cover. [1]: https://github.com/mvdan/gofumpt See the full list of [Added rules][2], but it includes: - Dropping empty lines around function bodies - Dropping unnecessary variable grouping when there's only one variable - Ensuring an empty line between multi-line functions - simplification (`-s` in gofmt) is always enabled - Ensuring multi-line function signatures end with `) {` on a separate line. [2]: https://github.com/mvdan/gofumpt#Added-rules gofumpt is stricter, but there's no lock-in. All gofumpt output is valid gofmt output, so if we decide we don't like it, it's easy to switch back without any code changes. gofumpt support is built into the tooling we use for development so this won't change development workflows. - golangci-lint includes a gofumpt check (enabled in this PR) - gopls, the LSP for Go, includes a gofumpt option (see [installation instrutions][3]) [3]: https://github.com/mvdan/gofumpt#installation This change was generated by running: ```bash gofumpt -w $(rg --files -g '*.go' | rg -v testdata | rg -v compilation_error) ``` The following files were manually tweaked afterwards: - pkg/cmd/pulumi/stack_change_secrets_provider.go: one of the lines overflowed and had comments in an inconvenient place - pkg/cmd/pulumi/destroy.go: `var x T = y` where `T` wasn't necessary - pkg/cmd/pulumi/policy_new.go: long line because of error message - pkg/backend/snapshot_test.go: long line trying to assign three variables in the same assignment I have included mention of gofumpt in the CONTRIBUTING.md.
2023-03-03 16:36:39 +00:00
opts *plugin.PolicyAnalyzerOptions,
) (plugin.Analyzer, error) {
2019-07-10 17:55:42 +00:00
return nil, errors.New("unsupported")
}
all: Reformat with gofumpt Per team discussion, switching to gofumpt. [gofumpt][1] is an alternative, stricter alternative to gofmt. It addresses other stylistic concerns that gofmt doesn't yet cover. [1]: https://github.com/mvdan/gofumpt See the full list of [Added rules][2], but it includes: - Dropping empty lines around function bodies - Dropping unnecessary variable grouping when there's only one variable - Ensuring an empty line between multi-line functions - simplification (`-s` in gofmt) is always enabled - Ensuring multi-line function signatures end with `) {` on a separate line. [2]: https://github.com/mvdan/gofumpt#Added-rules gofumpt is stricter, but there's no lock-in. All gofumpt output is valid gofmt output, so if we decide we don't like it, it's easy to switch back without any code changes. gofumpt support is built into the tooling we use for development so this won't change development workflows. - golangci-lint includes a gofumpt check (enabled in this PR) - gopls, the LSP for Go, includes a gofumpt option (see [installation instrutions][3]) [3]: https://github.com/mvdan/gofumpt#installation This change was generated by running: ```bash gofumpt -w $(rg --files -g '*.go' | rg -v testdata | rg -v compilation_error) ``` The following files were manually tweaked afterwards: - pkg/cmd/pulumi/stack_change_secrets_provider.go: one of the lines overflowed and had comments in an inconvenient place - pkg/cmd/pulumi/destroy.go: `var x T = y` where `T` wasn't necessary - pkg/cmd/pulumi/policy_new.go: long line because of error message - pkg/backend/snapshot_test.go: long line trying to assign three variables in the same assignment I have included mention of gofumpt in the CONTRIBUTING.md.
2023-03-03 16:36:39 +00:00
2019-07-10 17:55:42 +00:00
func (host *testPluginHost) ListAnalyzers() []plugin.Analyzer {
return nil
}
all: Reformat with gofumpt Per team discussion, switching to gofumpt. [gofumpt][1] is an alternative, stricter alternative to gofmt. It addresses other stylistic concerns that gofmt doesn't yet cover. [1]: https://github.com/mvdan/gofumpt See the full list of [Added rules][2], but it includes: - Dropping empty lines around function bodies - Dropping unnecessary variable grouping when there's only one variable - Ensuring an empty line between multi-line functions - simplification (`-s` in gofmt) is always enabled - Ensuring multi-line function signatures end with `) {` on a separate line. [2]: https://github.com/mvdan/gofumpt#Added-rules gofumpt is stricter, but there's no lock-in. All gofumpt output is valid gofmt output, so if we decide we don't like it, it's easy to switch back without any code changes. gofumpt support is built into the tooling we use for development so this won't change development workflows. - golangci-lint includes a gofumpt check (enabled in this PR) - gopls, the LSP for Go, includes a gofumpt option (see [installation instrutions][3]) [3]: https://github.com/mvdan/gofumpt#installation This change was generated by running: ```bash gofumpt -w $(rg --files -g '*.go' | rg -v testdata | rg -v compilation_error) ``` The following files were manually tweaked afterwards: - pkg/cmd/pulumi/stack_change_secrets_provider.go: one of the lines overflowed and had comments in an inconvenient place - pkg/cmd/pulumi/destroy.go: `var x T = y` where `T` wasn't necessary - pkg/cmd/pulumi/policy_new.go: long line because of error message - pkg/backend/snapshot_test.go: long line trying to assign three variables in the same assignment I have included mention of gofumpt in the CONTRIBUTING.md.
2023-03-03 16:36:39 +00:00
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
func (host *testPluginHost) Provider(pkg tokens.Package, version *semver.Version) (plugin.Provider, error) {
return host.provider(pkg, version)
}
all: Reformat with gofumpt Per team discussion, switching to gofumpt. [gofumpt][1] is an alternative, stricter alternative to gofmt. It addresses other stylistic concerns that gofmt doesn't yet cover. [1]: https://github.com/mvdan/gofumpt See the full list of [Added rules][2], but it includes: - Dropping empty lines around function bodies - Dropping unnecessary variable grouping when there's only one variable - Ensuring an empty line between multi-line functions - simplification (`-s` in gofmt) is always enabled - Ensuring multi-line function signatures end with `) {` on a separate line. [2]: https://github.com/mvdan/gofumpt#Added-rules gofumpt is stricter, but there's no lock-in. All gofumpt output is valid gofmt output, so if we decide we don't like it, it's easy to switch back without any code changes. gofumpt support is built into the tooling we use for development so this won't change development workflows. - golangci-lint includes a gofumpt check (enabled in this PR) - gopls, the LSP for Go, includes a gofumpt option (see [installation instrutions][3]) [3]: https://github.com/mvdan/gofumpt#installation This change was generated by running: ```bash gofumpt -w $(rg --files -g '*.go' | rg -v testdata | rg -v compilation_error) ``` The following files were manually tweaked afterwards: - pkg/cmd/pulumi/stack_change_secrets_provider.go: one of the lines overflowed and had comments in an inconvenient place - pkg/cmd/pulumi/destroy.go: `var x T = y` where `T` wasn't necessary - pkg/cmd/pulumi/policy_new.go: long line because of error message - pkg/backend/snapshot_test.go: long line trying to assign three variables in the same assignment I have included mention of gofumpt in the CONTRIBUTING.md.
2023-03-03 16:36:39 +00:00
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
func (host *testPluginHost) CloseProvider(provider plugin.Provider) error {
return host.closeProvider(provider)
}
all: Reformat with gofumpt Per team discussion, switching to gofumpt. [gofumpt][1] is an alternative, stricter alternative to gofmt. It addresses other stylistic concerns that gofmt doesn't yet cover. [1]: https://github.com/mvdan/gofumpt See the full list of [Added rules][2], but it includes: - Dropping empty lines around function bodies - Dropping unnecessary variable grouping when there's only one variable - Ensuring an empty line between multi-line functions - simplification (`-s` in gofmt) is always enabled - Ensuring multi-line function signatures end with `) {` on a separate line. [2]: https://github.com/mvdan/gofumpt#Added-rules gofumpt is stricter, but there's no lock-in. All gofumpt output is valid gofmt output, so if we decide we don't like it, it's easy to switch back without any code changes. gofumpt support is built into the tooling we use for development so this won't change development workflows. - golangci-lint includes a gofumpt check (enabled in this PR) - gopls, the LSP for Go, includes a gofumpt option (see [installation instrutions][3]) [3]: https://github.com/mvdan/gofumpt#installation This change was generated by running: ```bash gofumpt -w $(rg --files -g '*.go' | rg -v testdata | rg -v compilation_error) ``` The following files were manually tweaked afterwards: - pkg/cmd/pulumi/stack_change_secrets_provider.go: one of the lines overflowed and had comments in an inconvenient place - pkg/cmd/pulumi/destroy.go: `var x T = y` where `T` wasn't necessary - pkg/cmd/pulumi/policy_new.go: long line because of error message - pkg/backend/snapshot_test.go: long line trying to assign three variables in the same assignment I have included mention of gofumpt in the CONTRIBUTING.md.
2023-03-03 16:36:39 +00:00
func (host *testPluginHost) LanguageRuntime(root string, info plugin.ProgramInfo) (plugin.LanguageRuntime, error) {
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
return nil, errors.New("unsupported")
}
all: Reformat with gofumpt Per team discussion, switching to gofumpt. [gofumpt][1] is an alternative, stricter alternative to gofmt. It addresses other stylistic concerns that gofmt doesn't yet cover. [1]: https://github.com/mvdan/gofumpt See the full list of [Added rules][2], but it includes: - Dropping empty lines around function bodies - Dropping unnecessary variable grouping when there's only one variable - Ensuring an empty line between multi-line functions - simplification (`-s` in gofmt) is always enabled - Ensuring multi-line function signatures end with `) {` on a separate line. [2]: https://github.com/mvdan/gofumpt#Added-rules gofumpt is stricter, but there's no lock-in. All gofumpt output is valid gofmt output, so if we decide we don't like it, it's easy to switch back without any code changes. gofumpt support is built into the tooling we use for development so this won't change development workflows. - golangci-lint includes a gofumpt check (enabled in this PR) - gopls, the LSP for Go, includes a gofumpt option (see [installation instrutions][3]) [3]: https://github.com/mvdan/gofumpt#installation This change was generated by running: ```bash gofumpt -w $(rg --files -g '*.go' | rg -v testdata | rg -v compilation_error) ``` The following files were manually tweaked afterwards: - pkg/cmd/pulumi/stack_change_secrets_provider.go: one of the lines overflowed and had comments in an inconvenient place - pkg/cmd/pulumi/destroy.go: `var x T = y` where `T` wasn't necessary - pkg/cmd/pulumi/policy_new.go: long line because of error message - pkg/backend/snapshot_test.go: long line trying to assign three variables in the same assignment I have included mention of gofumpt in the CONTRIBUTING.md.
2023-03-03 16:36:39 +00:00
func (host *testPluginHost) EnsurePlugins(plugins []workspace.PluginSpec, kinds plugin.Flags) error {
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
return nil
}
all: Reformat with gofumpt Per team discussion, switching to gofumpt. [gofumpt][1] is an alternative, stricter alternative to gofmt. It addresses other stylistic concerns that gofmt doesn't yet cover. [1]: https://github.com/mvdan/gofumpt See the full list of [Added rules][2], but it includes: - Dropping empty lines around function bodies - Dropping unnecessary variable grouping when there's only one variable - Ensuring an empty line between multi-line functions - simplification (`-s` in gofmt) is always enabled - Ensuring multi-line function signatures end with `) {` on a separate line. [2]: https://github.com/mvdan/gofumpt#Added-rules gofumpt is stricter, but there's no lock-in. All gofumpt output is valid gofmt output, so if we decide we don't like it, it's easy to switch back without any code changes. gofumpt support is built into the tooling we use for development so this won't change development workflows. - golangci-lint includes a gofumpt check (enabled in this PR) - gopls, the LSP for Go, includes a gofumpt option (see [installation instrutions][3]) [3]: https://github.com/mvdan/gofumpt#installation This change was generated by running: ```bash gofumpt -w $(rg --files -g '*.go' | rg -v testdata | rg -v compilation_error) ``` The following files were manually tweaked afterwards: - pkg/cmd/pulumi/stack_change_secrets_provider.go: one of the lines overflowed and had comments in an inconvenient place - pkg/cmd/pulumi/destroy.go: `var x T = y` where `T` wasn't necessary - pkg/cmd/pulumi/policy_new.go: long line because of error message - pkg/backend/snapshot_test.go: long line trying to assign three variables in the same assignment I have included mention of gofumpt in the CONTRIBUTING.md.
2023-03-03 16:36:39 +00:00
func (host *testPluginHost) ResolvePlugin(
kind apitype.PluginKind, name string, version *semver.Version,
all: Reformat with gofumpt Per team discussion, switching to gofumpt. [gofumpt][1] is an alternative, stricter alternative to gofmt. It addresses other stylistic concerns that gofmt doesn't yet cover. [1]: https://github.com/mvdan/gofumpt See the full list of [Added rules][2], but it includes: - Dropping empty lines around function bodies - Dropping unnecessary variable grouping when there's only one variable - Ensuring an empty line between multi-line functions - simplification (`-s` in gofmt) is always enabled - Ensuring multi-line function signatures end with `) {` on a separate line. [2]: https://github.com/mvdan/gofumpt#Added-rules gofumpt is stricter, but there's no lock-in. All gofumpt output is valid gofmt output, so if we decide we don't like it, it's easy to switch back without any code changes. gofumpt support is built into the tooling we use for development so this won't change development workflows. - golangci-lint includes a gofumpt check (enabled in this PR) - gopls, the LSP for Go, includes a gofumpt option (see [installation instrutions][3]) [3]: https://github.com/mvdan/gofumpt#installation This change was generated by running: ```bash gofumpt -w $(rg --files -g '*.go' | rg -v testdata | rg -v compilation_error) ``` The following files were manually tweaked afterwards: - pkg/cmd/pulumi/stack_change_secrets_provider.go: one of the lines overflowed and had comments in an inconvenient place - pkg/cmd/pulumi/destroy.go: `var x T = y` where `T` wasn't necessary - pkg/cmd/pulumi/policy_new.go: long line because of error message - pkg/backend/snapshot_test.go: long line trying to assign three variables in the same assignment I have included mention of gofumpt in the CONTRIBUTING.md.
2023-03-03 16:36:39 +00:00
) (*workspace.PluginInfo, error) {
return nil, nil
}
func (host *testPluginHost) GetProjectPlugins() []workspace.ProjectPlugin {
return nil
}
func (host *testPluginHost) GetRequiredPlugins(project string, info plugin.ProgramInfo,
all: Reformat with gofumpt Per team discussion, switching to gofumpt. [gofumpt][1] is an alternative, stricter alternative to gofmt. It addresses other stylistic concerns that gofmt doesn't yet cover. [1]: https://github.com/mvdan/gofumpt See the full list of [Added rules][2], but it includes: - Dropping empty lines around function bodies - Dropping unnecessary variable grouping when there's only one variable - Ensuring an empty line between multi-line functions - simplification (`-s` in gofmt) is always enabled - Ensuring multi-line function signatures end with `) {` on a separate line. [2]: https://github.com/mvdan/gofumpt#Added-rules gofumpt is stricter, but there's no lock-in. All gofumpt output is valid gofmt output, so if we decide we don't like it, it's easy to switch back without any code changes. gofumpt support is built into the tooling we use for development so this won't change development workflows. - golangci-lint includes a gofumpt check (enabled in this PR) - gopls, the LSP for Go, includes a gofumpt option (see [installation instrutions][3]) [3]: https://github.com/mvdan/gofumpt#installation This change was generated by running: ```bash gofumpt -w $(rg --files -g '*.go' | rg -v testdata | rg -v compilation_error) ``` The following files were manually tweaked afterwards: - pkg/cmd/pulumi/stack_change_secrets_provider.go: one of the lines overflowed and had comments in an inconvenient place - pkg/cmd/pulumi/destroy.go: `var x T = y` where `T` wasn't necessary - pkg/cmd/pulumi/policy_new.go: long line because of error message - pkg/backend/snapshot_test.go: long line trying to assign three variables in the same assignment I have included mention of gofumpt in the CONTRIBUTING.md.
2023-03-03 16:36:39 +00:00
kinds plugin.Flags,
) ([]workspace.PluginInfo, error) {
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
return nil, nil
}
type testProvider struct {
Send old inputs to Delete (#14051) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes https://github.com/pulumi/pulumi/issues/14115. This was missed as part of https://github.com/pulumi/pulumi/pull/13139. Adds a new configure flag (sends_old_inputs_to_delete) which the engine will now always set to true. If that's set providers can rely on the old inputs being sent to delete, otherwise they'll get nil. ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [x] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-10-13 14:12:26 +00:00
plugin.UnimplementedProvider
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
pkg tokens.Package
version semver.Version
configured bool
checkConfig func(resource.URN, resource.PropertyMap,
resource.PropertyMap, bool) (resource.PropertyMap, []plugin.CheckFailure, error)
diffConfig func(resource.URN, resource.PropertyMap, resource.PropertyMap, bool, []string) (plugin.DiffResult, error)
config func(resource.PropertyMap) error
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
}
func (prov *testProvider) Pkg() tokens.Package {
return prov.pkg
}
all: Reformat with gofumpt Per team discussion, switching to gofumpt. [gofumpt][1] is an alternative, stricter alternative to gofmt. It addresses other stylistic concerns that gofmt doesn't yet cover. [1]: https://github.com/mvdan/gofumpt See the full list of [Added rules][2], but it includes: - Dropping empty lines around function bodies - Dropping unnecessary variable grouping when there's only one variable - Ensuring an empty line between multi-line functions - simplification (`-s` in gofmt) is always enabled - Ensuring multi-line function signatures end with `) {` on a separate line. [2]: https://github.com/mvdan/gofumpt#Added-rules gofumpt is stricter, but there's no lock-in. All gofumpt output is valid gofmt output, so if we decide we don't like it, it's easy to switch back without any code changes. gofumpt support is built into the tooling we use for development so this won't change development workflows. - golangci-lint includes a gofumpt check (enabled in this PR) - gopls, the LSP for Go, includes a gofumpt option (see [installation instrutions][3]) [3]: https://github.com/mvdan/gofumpt#installation This change was generated by running: ```bash gofumpt -w $(rg --files -g '*.go' | rg -v testdata | rg -v compilation_error) ``` The following files were manually tweaked afterwards: - pkg/cmd/pulumi/stack_change_secrets_provider.go: one of the lines overflowed and had comments in an inconvenient place - pkg/cmd/pulumi/destroy.go: `var x T = y` where `T` wasn't necessary - pkg/cmd/pulumi/policy_new.go: long line because of error message - pkg/backend/snapshot_test.go: long line trying to assign three variables in the same assignment I have included mention of gofumpt in the CONTRIBUTING.md.
2023-03-03 16:36:39 +00:00
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
func (prov *testProvider) GetSchema(
context.Context, plugin.GetSchemaRequest,
) (plugin.GetSchemaResponse, error) {
return plugin.GetSchemaResponse{Schema: []byte("{}")}, nil
}
all: Reformat with gofumpt Per team discussion, switching to gofumpt. [gofumpt][1] is an alternative, stricter alternative to gofmt. It addresses other stylistic concerns that gofmt doesn't yet cover. [1]: https://github.com/mvdan/gofumpt See the full list of [Added rules][2], but it includes: - Dropping empty lines around function bodies - Dropping unnecessary variable grouping when there's only one variable - Ensuring an empty line between multi-line functions - simplification (`-s` in gofmt) is always enabled - Ensuring multi-line function signatures end with `) {` on a separate line. [2]: https://github.com/mvdan/gofumpt#Added-rules gofumpt is stricter, but there's no lock-in. All gofumpt output is valid gofmt output, so if we decide we don't like it, it's easy to switch back without any code changes. gofumpt support is built into the tooling we use for development so this won't change development workflows. - golangci-lint includes a gofumpt check (enabled in this PR) - gopls, the LSP for Go, includes a gofumpt option (see [installation instrutions][3]) [3]: https://github.com/mvdan/gofumpt#installation This change was generated by running: ```bash gofumpt -w $(rg --files -g '*.go' | rg -v testdata | rg -v compilation_error) ``` The following files were manually tweaked afterwards: - pkg/cmd/pulumi/stack_change_secrets_provider.go: one of the lines overflowed and had comments in an inconvenient place - pkg/cmd/pulumi/destroy.go: `var x T = y` where `T` wasn't necessary - pkg/cmd/pulumi/policy_new.go: long line because of error message - pkg/backend/snapshot_test.go: long line trying to assign three variables in the same assignment I have included mention of gofumpt in the CONTRIBUTING.md.
2023-03-03 16:36:39 +00:00
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
func (prov *testProvider) CheckConfig(
_ context.Context, req plugin.CheckConfigRequest,
) (plugin.CheckConfigResponse, error) {
props, failures, err := prov.checkConfig(req.URN, req.Olds, req.News, req.AllowUnknowns)
return plugin.CheckConfigResponse{Properties: props, Failures: failures}, err
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
}
all: Reformat with gofumpt Per team discussion, switching to gofumpt. [gofumpt][1] is an alternative, stricter alternative to gofmt. It addresses other stylistic concerns that gofmt doesn't yet cover. [1]: https://github.com/mvdan/gofumpt See the full list of [Added rules][2], but it includes: - Dropping empty lines around function bodies - Dropping unnecessary variable grouping when there's only one variable - Ensuring an empty line between multi-line functions - simplification (`-s` in gofmt) is always enabled - Ensuring multi-line function signatures end with `) {` on a separate line. [2]: https://github.com/mvdan/gofumpt#Added-rules gofumpt is stricter, but there's no lock-in. All gofumpt output is valid gofmt output, so if we decide we don't like it, it's easy to switch back without any code changes. gofumpt support is built into the tooling we use for development so this won't change development workflows. - golangci-lint includes a gofumpt check (enabled in this PR) - gopls, the LSP for Go, includes a gofumpt option (see [installation instrutions][3]) [3]: https://github.com/mvdan/gofumpt#installation This change was generated by running: ```bash gofumpt -w $(rg --files -g '*.go' | rg -v testdata | rg -v compilation_error) ``` The following files were manually tweaked afterwards: - pkg/cmd/pulumi/stack_change_secrets_provider.go: one of the lines overflowed and had comments in an inconvenient place - pkg/cmd/pulumi/destroy.go: `var x T = y` where `T` wasn't necessary - pkg/cmd/pulumi/policy_new.go: long line because of error message - pkg/backend/snapshot_test.go: long line trying to assign three variables in the same assignment I have included mention of gofumpt in the CONTRIBUTING.md.
2023-03-03 16:36:39 +00:00
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
func (prov *testProvider) DiffConfig(
_ context.Context, req plugin.DiffConfigRequest,
) (plugin.DiffConfigResponse, error) {
return prov.diffConfig(req.URN, req.OldOutputs, req.NewInputs, req.AllowUnknowns, req.IgnoreChanges)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
}
all: Reformat with gofumpt Per team discussion, switching to gofumpt. [gofumpt][1] is an alternative, stricter alternative to gofmt. It addresses other stylistic concerns that gofmt doesn't yet cover. [1]: https://github.com/mvdan/gofumpt See the full list of [Added rules][2], but it includes: - Dropping empty lines around function bodies - Dropping unnecessary variable grouping when there's only one variable - Ensuring an empty line between multi-line functions - simplification (`-s` in gofmt) is always enabled - Ensuring multi-line function signatures end with `) {` on a separate line. [2]: https://github.com/mvdan/gofumpt#Added-rules gofumpt is stricter, but there's no lock-in. All gofumpt output is valid gofmt output, so if we decide we don't like it, it's easy to switch back without any code changes. gofumpt support is built into the tooling we use for development so this won't change development workflows. - golangci-lint includes a gofumpt check (enabled in this PR) - gopls, the LSP for Go, includes a gofumpt option (see [installation instrutions][3]) [3]: https://github.com/mvdan/gofumpt#installation This change was generated by running: ```bash gofumpt -w $(rg --files -g '*.go' | rg -v testdata | rg -v compilation_error) ``` The following files were manually tweaked afterwards: - pkg/cmd/pulumi/stack_change_secrets_provider.go: one of the lines overflowed and had comments in an inconvenient place - pkg/cmd/pulumi/destroy.go: `var x T = y` where `T` wasn't necessary - pkg/cmd/pulumi/policy_new.go: long line because of error message - pkg/backend/snapshot_test.go: long line trying to assign three variables in the same assignment I have included mention of gofumpt in the CONTRIBUTING.md.
2023-03-03 16:36:39 +00:00
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
func (prov *testProvider) Configure(
_ context.Context, req plugin.ConfigureRequest,
) (plugin.ConfigureResponse, error) {
if err := prov.config(req.Inputs); err != nil {
return plugin.ConfigureResponse{}, err
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
}
prov.configured = true
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
return plugin.ConfigureResponse{}, nil
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
}
all: Reformat with gofumpt Per team discussion, switching to gofumpt. [gofumpt][1] is an alternative, stricter alternative to gofmt. It addresses other stylistic concerns that gofmt doesn't yet cover. [1]: https://github.com/mvdan/gofumpt See the full list of [Added rules][2], but it includes: - Dropping empty lines around function bodies - Dropping unnecessary variable grouping when there's only one variable - Ensuring an empty line between multi-line functions - simplification (`-s` in gofmt) is always enabled - Ensuring multi-line function signatures end with `) {` on a separate line. [2]: https://github.com/mvdan/gofumpt#Added-rules gofumpt is stricter, but there's no lock-in. All gofumpt output is valid gofmt output, so if we decide we don't like it, it's easy to switch back without any code changes. gofumpt support is built into the tooling we use for development so this won't change development workflows. - golangci-lint includes a gofumpt check (enabled in this PR) - gopls, the LSP for Go, includes a gofumpt option (see [installation instrutions][3]) [3]: https://github.com/mvdan/gofumpt#installation This change was generated by running: ```bash gofumpt -w $(rg --files -g '*.go' | rg -v testdata | rg -v compilation_error) ``` The following files were manually tweaked afterwards: - pkg/cmd/pulumi/stack_change_secrets_provider.go: one of the lines overflowed and had comments in an inconvenient place - pkg/cmd/pulumi/destroy.go: `var x T = y` where `T` wasn't necessary - pkg/cmd/pulumi/policy_new.go: long line because of error message - pkg/backend/snapshot_test.go: long line trying to assign three variables in the same assignment I have included mention of gofumpt in the CONTRIBUTING.md.
2023-03-03 16:36:39 +00:00
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
func (prov *testProvider) GetPluginInfo(context.Context) (workspace.PluginInfo, error) {
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
return workspace.PluginInfo{
Name: "testProvider",
Version: &prov.version,
}, nil
}
all: Reformat with gofumpt Per team discussion, switching to gofumpt. [gofumpt][1] is an alternative, stricter alternative to gofmt. It addresses other stylistic concerns that gofmt doesn't yet cover. [1]: https://github.com/mvdan/gofumpt See the full list of [Added rules][2], but it includes: - Dropping empty lines around function bodies - Dropping unnecessary variable grouping when there's only one variable - Ensuring an empty line between multi-line functions - simplification (`-s` in gofmt) is always enabled - Ensuring multi-line function signatures end with `) {` on a separate line. [2]: https://github.com/mvdan/gofumpt#Added-rules gofumpt is stricter, but there's no lock-in. All gofumpt output is valid gofmt output, so if we decide we don't like it, it's easy to switch back without any code changes. gofumpt support is built into the tooling we use for development so this won't change development workflows. - golangci-lint includes a gofumpt check (enabled in this PR) - gopls, the LSP for Go, includes a gofumpt option (see [installation instrutions][3]) [3]: https://github.com/mvdan/gofumpt#installation This change was generated by running: ```bash gofumpt -w $(rg --files -g '*.go' | rg -v testdata | rg -v compilation_error) ``` The following files were manually tweaked afterwards: - pkg/cmd/pulumi/stack_change_secrets_provider.go: one of the lines overflowed and had comments in an inconvenient place - pkg/cmd/pulumi/destroy.go: `var x T = y` where `T` wasn't necessary - pkg/cmd/pulumi/policy_new.go: long line because of error message - pkg/backend/snapshot_test.go: long line trying to assign three variables in the same assignment I have included mention of gofumpt in the CONTRIBUTING.md.
2023-03-03 16:36:39 +00:00
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
func (prov *testProvider) GetMapping(
context.Context, plugin.GetMappingRequest,
) (plugin.GetMappingResponse, error) {
return plugin.GetMappingResponse{}, nil
2022-12-01 23:03:25 +00:00
}
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
func (prov *testProvider) GetMappings(
context.Context, plugin.GetMappingsRequest,
) (plugin.GetMappingsResponse, error) {
return plugin.GetMappingsResponse{}, nil
More efficent mapping lookup (#13975) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Inspired by a comment from Zaid. This allows providers to return what providers they have mapping information for without having to marshal all their mapping data to the engine at the same time, this could save transmitting a lot of data that the engine might not ever need (for example if it's not converting code for that specific provider). It also allows provider to support mulitple mappings. ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [x] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-09-21 11:45:07 +00:00
}
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
type providerLoader struct {
pkg tokens.Package
version semver.Version
load func() (plugin.Provider, error)
}
func newPluginHost(t *testing.T, loaders []*providerLoader) plugin.Host {
return &testPluginHost{
t: t,
provider: func(pkg tokens.Package, ver *semver.Version) (plugin.Provider, error) {
var best *providerLoader
for _, l := range loaders {
if l.pkg != pkg {
continue
}
if ver != nil && l.version.LT(*ver) {
continue
}
if best == nil || l.version.GT(best.version) {
best = l
}
}
if best == nil {
return nil, nil
}
return best.load()
},
closeProvider: func(provider plugin.Provider) error {
return nil
},
}
}
func newLoader(t *testing.T, pkg, version string,
all: Reformat with gofumpt Per team discussion, switching to gofumpt. [gofumpt][1] is an alternative, stricter alternative to gofmt. It addresses other stylistic concerns that gofmt doesn't yet cover. [1]: https://github.com/mvdan/gofumpt See the full list of [Added rules][2], but it includes: - Dropping empty lines around function bodies - Dropping unnecessary variable grouping when there's only one variable - Ensuring an empty line between multi-line functions - simplification (`-s` in gofmt) is always enabled - Ensuring multi-line function signatures end with `) {` on a separate line. [2]: https://github.com/mvdan/gofumpt#Added-rules gofumpt is stricter, but there's no lock-in. All gofumpt output is valid gofmt output, so if we decide we don't like it, it's easy to switch back without any code changes. gofumpt support is built into the tooling we use for development so this won't change development workflows. - golangci-lint includes a gofumpt check (enabled in this PR) - gopls, the LSP for Go, includes a gofumpt option (see [installation instrutions][3]) [3]: https://github.com/mvdan/gofumpt#installation This change was generated by running: ```bash gofumpt -w $(rg --files -g '*.go' | rg -v testdata | rg -v compilation_error) ``` The following files were manually tweaked afterwards: - pkg/cmd/pulumi/stack_change_secrets_provider.go: one of the lines overflowed and had comments in an inconvenient place - pkg/cmd/pulumi/destroy.go: `var x T = y` where `T` wasn't necessary - pkg/cmd/pulumi/policy_new.go: long line because of error message - pkg/backend/snapshot_test.go: long line trying to assign three variables in the same assignment I have included mention of gofumpt in the CONTRIBUTING.md.
2023-03-03 16:36:39 +00:00
load func(tokens.Package, semver.Version) (plugin.Provider, error),
) *providerLoader {
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
var ver semver.Version
if version != "" {
v, err := semver.ParseTolerant(version)
assert.NoError(t, err)
ver = v
}
return &providerLoader{
pkg: tokens.Package(pkg),
version: ver,
load: func() (plugin.Provider, error) {
return load(tokens.Package(pkg), ver)
},
}
}
func newSimpleLoader(t *testing.T, pkg, version string, config func(resource.PropertyMap) error) *providerLoader {
if config == nil {
config = func(resource.PropertyMap) error {
return nil
}
}
return newLoader(t, pkg, version, func(pkg tokens.Package, ver semver.Version) (plugin.Provider, error) {
return &testProvider{
pkg: pkg,
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
version: ver,
checkConfig: func(urn resource.URN, olds,
all: Reformat with gofumpt Per team discussion, switching to gofumpt. [gofumpt][1] is an alternative, stricter alternative to gofmt. It addresses other stylistic concerns that gofmt doesn't yet cover. [1]: https://github.com/mvdan/gofumpt See the full list of [Added rules][2], but it includes: - Dropping empty lines around function bodies - Dropping unnecessary variable grouping when there's only one variable - Ensuring an empty line between multi-line functions - simplification (`-s` in gofmt) is always enabled - Ensuring multi-line function signatures end with `) {` on a separate line. [2]: https://github.com/mvdan/gofumpt#Added-rules gofumpt is stricter, but there's no lock-in. All gofumpt output is valid gofmt output, so if we decide we don't like it, it's easy to switch back without any code changes. gofumpt support is built into the tooling we use for development so this won't change development workflows. - golangci-lint includes a gofumpt check (enabled in this PR) - gopls, the LSP for Go, includes a gofumpt option (see [installation instrutions][3]) [3]: https://github.com/mvdan/gofumpt#installation This change was generated by running: ```bash gofumpt -w $(rg --files -g '*.go' | rg -v testdata | rg -v compilation_error) ``` The following files were manually tweaked afterwards: - pkg/cmd/pulumi/stack_change_secrets_provider.go: one of the lines overflowed and had comments in an inconvenient place - pkg/cmd/pulumi/destroy.go: `var x T = y` where `T` wasn't necessary - pkg/cmd/pulumi/policy_new.go: long line because of error message - pkg/backend/snapshot_test.go: long line trying to assign three variables in the same assignment I have included mention of gofumpt in the CONTRIBUTING.md.
2023-03-03 16:36:39 +00:00
news resource.PropertyMap, allowUnknowns bool,
) (resource.PropertyMap, []plugin.CheckFailure, error) {
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
return news, nil, nil
},
diffConfig: func(urn resource.URN, olds, news resource.PropertyMap,
all: Reformat with gofumpt Per team discussion, switching to gofumpt. [gofumpt][1] is an alternative, stricter alternative to gofmt. It addresses other stylistic concerns that gofmt doesn't yet cover. [1]: https://github.com/mvdan/gofumpt See the full list of [Added rules][2], but it includes: - Dropping empty lines around function bodies - Dropping unnecessary variable grouping when there's only one variable - Ensuring an empty line between multi-line functions - simplification (`-s` in gofmt) is always enabled - Ensuring multi-line function signatures end with `) {` on a separate line. [2]: https://github.com/mvdan/gofumpt#Added-rules gofumpt is stricter, but there's no lock-in. All gofumpt output is valid gofmt output, so if we decide we don't like it, it's easy to switch back without any code changes. gofumpt support is built into the tooling we use for development so this won't change development workflows. - golangci-lint includes a gofumpt check (enabled in this PR) - gopls, the LSP for Go, includes a gofumpt option (see [installation instrutions][3]) [3]: https://github.com/mvdan/gofumpt#installation This change was generated by running: ```bash gofumpt -w $(rg --files -g '*.go' | rg -v testdata | rg -v compilation_error) ``` The following files were manually tweaked afterwards: - pkg/cmd/pulumi/stack_change_secrets_provider.go: one of the lines overflowed and had comments in an inconvenient place - pkg/cmd/pulumi/destroy.go: `var x T = y` where `T` wasn't necessary - pkg/cmd/pulumi/policy_new.go: long line because of error message - pkg/backend/snapshot_test.go: long line trying to assign three variables in the same assignment I have included mention of gofumpt in the CONTRIBUTING.md.
2023-03-03 16:36:39 +00:00
allowUnknowns bool, ignoreChanges []string,
) (plugin.DiffResult, error) {
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
return plugin.DiffResult{}, nil
},
config: config,
}, nil
})
}
func newProviderState(pkg, name, id string, delete bool, inputs resource.PropertyMap) *resource.State {
typ := MakeProviderType(tokens.Package(pkg))
Allow anything in resource names (#14107) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes https://github.com/pulumi/pulumi/issues/13968. Fixes https://github.com/pulumi/pulumi/issues/8949. This requires changing the parsing of URN's slightly, it is _very_ likely that providers will need to update to handle URNs like this correctly. This changes resource names to be `string` not `QName`. We never validated this before and it turns out that users have put all manner of text for resource names so we just updating the system to correctly reflect that. ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [x] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [x] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-11-20 08:59:00 +00:00
urn := resource.NewURN("test", "test", "", typ, name)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
if inputs == nil {
inputs = resource.PropertyMap{}
}
return &resource.State{
Type: typ,
URN: urn,
Custom: true,
Delete: delete,
ID: resource.ID(id),
Inputs: inputs,
}
}
func TestNewRegistryNoOldState(t *testing.T) {
t.Parallel()
Don't load providers at startup This changes the provider registry to no longer load all the providers from the old state on startup (in `NewRegistry`) instead the load logic has been moved to the `Same` method. The step_executor and step_generator have been fixed up to ensure that for cases where a resource might not have had it's provider created yet (i.e. for DBR'ing the old version of a resource, for refreshes or deletes) they ask the `Deployment` to look up the provider in the old state and `Same` it in the registry. All of the above means we only load providers we're going to use (even taking --targets into account). One fix mot done in this change is to auto-update providers for deletes. That is given a program state with two resources both using V1 of a provider, if you run the program to update one of those resource to use V2 of the provider but to delete the other resource currently we'll still load V1 to do that delete. It _might_ be possible (although this is definitly questionable) to see that another resource changed it's provider from V1 to V2 and to just assume the same change should have happened to the deleted resource. This could be helpful for not loading old provider versions at all, but can be done in two passes now pretty easily. Just run `up` without any program changes except for the SDK version bump to update all the provider references to V2 of the provider, then do another `up` that deletes the second resource. Fixes https://github.com/pulumi/pulumi/issues/12177.
2023-04-12 09:35:20 +00:00
r := NewRegistry(&testPluginHost{}, false, nil)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
assert.NotNil(t, r)
Don't load providers at startup This changes the provider registry to no longer load all the providers from the old state on startup (in `NewRegistry`) instead the load logic has been moved to the `Same` method. The step_executor and step_generator have been fixed up to ensure that for cases where a resource might not have had it's provider created yet (i.e. for DBR'ing the old version of a resource, for refreshes or deletes) they ask the `Deployment` to look up the provider in the old state and `Same` it in the registry. All of the above means we only load providers we're going to use (even taking --targets into account). One fix mot done in this change is to auto-update providers for deletes. That is given a program state with two resources both using V1 of a provider, if you run the program to update one of those resource to use V2 of the provider but to delete the other resource currently we'll still load V1 to do that delete. It _might_ be possible (although this is definitly questionable) to see that another resource changed it's provider from V1 to V2 and to just assume the same change should have happened to the deleted resource. This could be helpful for not loading old provider versions at all, but can be done in two passes now pretty easily. Just run `up` without any program changes except for the SDK version bump to update all the provider references to V2 of the provider, then do another `up` that deletes the second resource. Fixes https://github.com/pulumi/pulumi/issues/12177.
2023-04-12 09:35:20 +00:00
r = NewRegistry(&testPluginHost{}, true, nil)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
assert.NotNil(t, r)
}
func TestNewRegistryOldState(t *testing.T) {
t.Parallel()
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
olds := []*resource.State{
// Two providers from package A, each with a unique name and ID
newProviderState("pkgA", "a", "id1", false, nil),
newProviderState("pkgA", "b", "id2", false, nil),
// Two providers from package B, each with a unique name and ID
newProviderState("pkgB", "a", "id1", false, nil),
newProviderState("pkgB", "b", "id2", false, nil),
// Two providers from package C, both with the same name but with unique IDs and one marked for deletion
newProviderState("pkgC", "a", "id1", false, nil),
newProviderState("pkgC", "a", "id2", true, nil),
// One provider from package D with a version
newProviderState("pkgD", "a", "id1", false, resource.PropertyMap{
"version": resource.NewStringProperty("1.0.0"),
}),
}
loaders := []*providerLoader{
newSimpleLoader(t, "pkgA", "", nil),
newSimpleLoader(t, "pkgB", "", nil),
newSimpleLoader(t, "pkgC", "", nil),
newSimpleLoader(t, "pkgD", "1.0.0", nil),
}
host := newPluginHost(t, loaders)
Don't load providers at startup This changes the provider registry to no longer load all the providers from the old state on startup (in `NewRegistry`) instead the load logic has been moved to the `Same` method. The step_executor and step_generator have been fixed up to ensure that for cases where a resource might not have had it's provider created yet (i.e. for DBR'ing the old version of a resource, for refreshes or deletes) they ask the `Deployment` to look up the provider in the old state and `Same` it in the registry. All of the above means we only load providers we're going to use (even taking --targets into account). One fix mot done in this change is to auto-update providers for deletes. That is given a program state with two resources both using V1 of a provider, if you run the program to update one of those resource to use V2 of the provider but to delete the other resource currently we'll still load V1 to do that delete. It _might_ be possible (although this is definitly questionable) to see that another resource changed it's provider from V1 to V2 and to just assume the same change should have happened to the deleted resource. This could be helpful for not loading old provider versions at all, but can be done in two passes now pretty easily. Just run `up` without any program changes except for the SDK version bump to update all the provider references to V2 of the provider, then do another `up` that deletes the second resource. Fixes https://github.com/pulumi/pulumi/issues/12177.
2023-04-12 09:35:20 +00:00
r := NewRegistry(host, false, nil)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
assert.NotNil(t, r)
for _, old := range olds {
ref, err := NewReference(old.URN, old.ID)
assert.NoError(t, err)
p, ok := r.GetProvider(ref)
Don't load providers at startup This changes the provider registry to no longer load all the providers from the old state on startup (in `NewRegistry`) instead the load logic has been moved to the `Same` method. The step_executor and step_generator have been fixed up to ensure that for cases where a resource might not have had it's provider created yet (i.e. for DBR'ing the old version of a resource, for refreshes or deletes) they ask the `Deployment` to look up the provider in the old state and `Same` it in the registry. All of the above means we only load providers we're going to use (even taking --targets into account). One fix mot done in this change is to auto-update providers for deletes. That is given a program state with two resources both using V1 of a provider, if you run the program to update one of those resource to use V2 of the provider but to delete the other resource currently we'll still load V1 to do that delete. It _might_ be possible (although this is definitly questionable) to see that another resource changed it's provider from V1 to V2 and to just assume the same change should have happened to the deleted resource. This could be helpful for not loading old provider versions at all, but can be done in two passes now pretty easily. Just run `up` without any program changes except for the SDK version bump to update all the provider references to V2 of the provider, then do another `up` that deletes the second resource. Fixes https://github.com/pulumi/pulumi/issues/12177.
2023-04-12 09:35:20 +00:00
assert.False(t, ok)
assert.Nil(t, p)
// "Same" the provider to add it to registry
err = r.Same(old)
assert.NoError(t, err)
// Now we should be able to get it
p, ok = r.GetProvider(ref)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
assert.True(t, ok)
assert.NotNil(t, p)
assert.True(t, p.(*testProvider).configured)
assert.Equal(t, GetProviderPackage(old.Type), p.Pkg())
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
ver, err := GetProviderVersion(old.Inputs)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
assert.NoError(t, err)
if ver != nil {
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
info, err := p.GetPluginInfo(context.Background())
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
assert.NoError(t, err)
assert.True(t, info.Version.GTE(*ver))
}
}
}
func TestCRUD(t *testing.T) {
t.Parallel()
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
olds := []*resource.State{
newProviderState("pkgA", "a", "id1", false, nil),
newProviderState("pkgB", "a", "id1", false, nil),
newProviderState("pkgC", "a", "id1", false, nil),
}
loaders := []*providerLoader{
newSimpleLoader(t, "pkgA", "", nil),
newSimpleLoader(t, "pkgB", "", nil),
newSimpleLoader(t, "pkgC", "", nil),
}
host := newPluginHost(t, loaders)
Don't load providers at startup This changes the provider registry to no longer load all the providers from the old state on startup (in `NewRegistry`) instead the load logic has been moved to the `Same` method. The step_executor and step_generator have been fixed up to ensure that for cases where a resource might not have had it's provider created yet (i.e. for DBR'ing the old version of a resource, for refreshes or deletes) they ask the `Deployment` to look up the provider in the old state and `Same` it in the registry. All of the above means we only load providers we're going to use (even taking --targets into account). One fix mot done in this change is to auto-update providers for deletes. That is given a program state with two resources both using V1 of a provider, if you run the program to update one of those resource to use V2 of the provider but to delete the other resource currently we'll still load V1 to do that delete. It _might_ be possible (although this is definitly questionable) to see that another resource changed it's provider from V1 to V2 and to just assume the same change should have happened to the deleted resource. This could be helpful for not loading old provider versions at all, but can be done in two passes now pretty easily. Just run `up` without any program changes except for the SDK version bump to update all the provider references to V2 of the provider, then do another `up` that deletes the second resource. Fixes https://github.com/pulumi/pulumi/issues/12177.
2023-04-12 09:35:20 +00:00
r := NewRegistry(host, false, nil)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
assert.NotNil(t, r)
for _, old := range olds {
ref, err := NewReference(old.URN, old.ID)
assert.NoError(t, err)
p, ok := r.GetProvider(ref)
Don't load providers at startup This changes the provider registry to no longer load all the providers from the old state on startup (in `NewRegistry`) instead the load logic has been moved to the `Same` method. The step_executor and step_generator have been fixed up to ensure that for cases where a resource might not have had it's provider created yet (i.e. for DBR'ing the old version of a resource, for refreshes or deletes) they ask the `Deployment` to look up the provider in the old state and `Same` it in the registry. All of the above means we only load providers we're going to use (even taking --targets into account). One fix mot done in this change is to auto-update providers for deletes. That is given a program state with two resources both using V1 of a provider, if you run the program to update one of those resource to use V2 of the provider but to delete the other resource currently we'll still load V1 to do that delete. It _might_ be possible (although this is definitly questionable) to see that another resource changed it's provider from V1 to V2 and to just assume the same change should have happened to the deleted resource. This could be helpful for not loading old provider versions at all, but can be done in two passes now pretty easily. Just run `up` without any program changes except for the SDK version bump to update all the provider references to V2 of the provider, then do another `up` that deletes the second resource. Fixes https://github.com/pulumi/pulumi/issues/12177.
2023-04-12 09:35:20 +00:00
assert.False(t, ok)
assert.Nil(t, p)
// "Same" the provider to add it to registry
err = r.Same(old)
assert.NoError(t, err)
// Now we should be able to get it
p, ok = r.GetProvider(ref)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
assert.True(t, ok)
assert.NotNil(t, p)
assert.Equal(t, GetProviderPackage(old.Type), p.Pkg())
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
}
// Create a new provider for each package.
for _, l := range loaders {
typ := MakeProviderType(l.pkg)
urn := resource.NewURN("test", "test", "", typ, "b")
olds, news := resource.PropertyMap{}, resource.PropertyMap{}
2019-07-15 21:26:28 +00:00
timeout := float64(120)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
// Check
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
check, err := r.Check(context.Background(), plugin.CheckRequest{
URN: urn,
Olds: olds,
News: news,
})
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
assert.NoError(t, err)
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
assert.Equal(t, news, check.Properties)
assert.Empty(t, check.Failures)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
// Since this is not a preview, the provider should not yet be configured.
Reuse provider instances where possible (#14127) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes https://github.com/pulumi/pulumi/issues/13987. This reworks the registry to better track provider instances such that we can reuse unconfigured instances between Creates, Updates, and Sames. When we allocate a provider instance in the registry for a Check call we save it with the special id "unconfigured". This value should never make its way back to program SDKs, it's purely an internal value for the engine. When we do a Create, Update or Same we look to see if there's an unconfigured provider to use and if so configures that one, else it starts up a fresh one. (N.B. Update we can assume there will always be an unconfigured one from the Check call before). This has also fixed registry Create to use the ID `UnknownID` rather than `""`, have added some contract assertions to check that and fixed up some test fallout because of that (the tests had been getting away with leaving ID blank before). ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-10-12 20:46:01 +00:00
p, ok := r.GetProvider(Reference{urn: urn, id: UnconfiguredID})
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
assert.True(t, ok)
assert.False(t, p.(*testProvider).configured)
// Create
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
create, err := r.Create(context.Background(), plugin.CreateRequest{
URN: urn,
Properties: check.Properties,
Timeout: timeout,
})
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
assert.NoError(t, err)
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
assert.NotEqual(t, "", create.ID)
assert.NotEqual(t, UnconfiguredID, create.ID)
assert.NotEqual(t, UnknownID, create.ID)
assert.Equal(t, resource.PropertyMap{}, create.Properties)
assert.Equal(t, resource.StatusOK, create.Status)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
p2, ok := r.GetProvider(Reference{urn: urn, id: create.ID})
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
assert.True(t, ok)
assert.Equal(t, p, p2)
assert.True(t, p2.(*testProvider).configured)
}
// Update the existing provider for the first entry in olds.
{
urn, id := olds[0].URN, olds[0].ID
olds, news := olds[0].Inputs, olds[0].Inputs
2019-07-15 21:26:28 +00:00
timeout := float64(120)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
// Fetch the old provider instance.
old, ok := r.GetProvider(Reference{urn: urn, id: id})
assert.True(t, ok)
// Check
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
check, err := r.Check(context.Background(), plugin.CheckRequest{
URN: urn,
Olds: olds,
News: news,
})
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
assert.NoError(t, err)
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
assert.Equal(t, news, check.Properties)
assert.Empty(t, check.Failures)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
// Since this is not a preview, the provider should not yet be configured.
Reuse provider instances where possible (#14127) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes https://github.com/pulumi/pulumi/issues/13987. This reworks the registry to better track provider instances such that we can reuse unconfigured instances between Creates, Updates, and Sames. When we allocate a provider instance in the registry for a Check call we save it with the special id "unconfigured". This value should never make its way back to program SDKs, it's purely an internal value for the engine. When we do a Create, Update or Same we look to see if there's an unconfigured provider to use and if so configures that one, else it starts up a fresh one. (N.B. Update we can assume there will always be an unconfigured one from the Check call before). This has also fixed registry Create to use the ID `UnknownID` rather than `""`, have added some contract assertions to check that and fixed up some test fallout because of that (the tests had been getting away with leaving ID blank before). ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-10-12 20:46:01 +00:00
p, ok := r.GetProvider(Reference{urn: urn, id: UnconfiguredID})
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
assert.True(t, ok)
assert.False(t, p == old)
assert.False(t, p.(*testProvider).configured)
// Diff
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
diff, err := r.Diff(context.Background(), plugin.DiffRequest{
URN: urn,
ID: id,
OldOutputs: olds,
NewInputs: news,
})
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
assert.NoError(t, err)
assert.Equal(t, plugin.DiffResult{Changes: plugin.DiffNone}, diff)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
// The old provider should still be registered.
p2, ok := r.GetProvider(Reference{urn: urn, id: id})
assert.True(t, ok)
assert.Equal(t, old, p2)
// Update
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
update, err := r.Update(context.Background(), plugin.UpdateRequest{
URN: urn,
ID: id,
OldOutputs: olds,
NewInputs: check.Properties,
Timeout: timeout,
})
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
assert.NoError(t, err)
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
assert.Equal(t, resource.PropertyMap{}, update.Properties)
assert.Equal(t, resource.StatusOK, update.Status)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
p3, ok := r.GetProvider(Reference{urn: urn, id: id})
assert.True(t, ok)
assert.True(t, p3 == p)
assert.True(t, p3.(*testProvider).configured)
}
// Delete the existing provider for the last entry in olds.
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
{
urn, id := olds[len(olds)-1].URN, olds[len(olds)-1].ID
2019-07-15 21:26:28 +00:00
timeout := float64(120)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
// Fetch the old provider instance.
_, ok := r.GetProvider(Reference{urn: urn, id: id})
assert.True(t, ok)
// Delete
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
resp, err := r.Delete(context.Background(), plugin.DeleteRequest{
URN: urn,
ID: id,
Inputs: resource.PropertyMap{},
Outputs: resource.PropertyMap{},
Timeout: timeout,
})
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
assert.NoError(t, err)
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
assert.Equal(t, resource.StatusOK, resp.Status)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
_, ok = r.GetProvider(Reference{urn: urn, id: id})
assert.False(t, ok)
}
}
func TestCRUDPreview(t *testing.T) {
t.Parallel()
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
olds := []*resource.State{
newProviderState("pkgA", "a", "id1", false, nil),
newProviderState("pkgB", "a", "id1", false, nil),
newProviderState("pkgC", "a", "id1", false, nil),
newProviderState("pkgD", "a", "id1", false, nil),
}
loaders := []*providerLoader{
newSimpleLoader(t, "pkgA", "", nil),
newSimpleLoader(t, "pkgB", "", nil),
newSimpleLoader(t, "pkgC", "", nil),
newLoader(t, "pkgD", "", func(pkg tokens.Package, ver semver.Version) (plugin.Provider, error) {
return &testProvider{
pkg: pkg,
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
version: ver,
checkConfig: func(urn resource.URN, olds,
all: Reformat with gofumpt Per team discussion, switching to gofumpt. [gofumpt][1] is an alternative, stricter alternative to gofmt. It addresses other stylistic concerns that gofmt doesn't yet cover. [1]: https://github.com/mvdan/gofumpt See the full list of [Added rules][2], but it includes: - Dropping empty lines around function bodies - Dropping unnecessary variable grouping when there's only one variable - Ensuring an empty line between multi-line functions - simplification (`-s` in gofmt) is always enabled - Ensuring multi-line function signatures end with `) {` on a separate line. [2]: https://github.com/mvdan/gofumpt#Added-rules gofumpt is stricter, but there's no lock-in. All gofumpt output is valid gofmt output, so if we decide we don't like it, it's easy to switch back without any code changes. gofumpt support is built into the tooling we use for development so this won't change development workflows. - golangci-lint includes a gofumpt check (enabled in this PR) - gopls, the LSP for Go, includes a gofumpt option (see [installation instrutions][3]) [3]: https://github.com/mvdan/gofumpt#installation This change was generated by running: ```bash gofumpt -w $(rg --files -g '*.go' | rg -v testdata | rg -v compilation_error) ``` The following files were manually tweaked afterwards: - pkg/cmd/pulumi/stack_change_secrets_provider.go: one of the lines overflowed and had comments in an inconvenient place - pkg/cmd/pulumi/destroy.go: `var x T = y` where `T` wasn't necessary - pkg/cmd/pulumi/policy_new.go: long line because of error message - pkg/backend/snapshot_test.go: long line trying to assign three variables in the same assignment I have included mention of gofumpt in the CONTRIBUTING.md.
2023-03-03 16:36:39 +00:00
news resource.PropertyMap, allowUnknowns bool,
) (resource.PropertyMap, []plugin.CheckFailure, error) {
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
return news, nil, nil
},
diffConfig: func(urn resource.URN, olds, news resource.PropertyMap,
all: Reformat with gofumpt Per team discussion, switching to gofumpt. [gofumpt][1] is an alternative, stricter alternative to gofmt. It addresses other stylistic concerns that gofmt doesn't yet cover. [1]: https://github.com/mvdan/gofumpt See the full list of [Added rules][2], but it includes: - Dropping empty lines around function bodies - Dropping unnecessary variable grouping when there's only one variable - Ensuring an empty line between multi-line functions - simplification (`-s` in gofmt) is always enabled - Ensuring multi-line function signatures end with `) {` on a separate line. [2]: https://github.com/mvdan/gofumpt#Added-rules gofumpt is stricter, but there's no lock-in. All gofumpt output is valid gofmt output, so if we decide we don't like it, it's easy to switch back without any code changes. gofumpt support is built into the tooling we use for development so this won't change development workflows. - golangci-lint includes a gofumpt check (enabled in this PR) - gopls, the LSP for Go, includes a gofumpt option (see [installation instrutions][3]) [3]: https://github.com/mvdan/gofumpt#installation This change was generated by running: ```bash gofumpt -w $(rg --files -g '*.go' | rg -v testdata | rg -v compilation_error) ``` The following files were manually tweaked afterwards: - pkg/cmd/pulumi/stack_change_secrets_provider.go: one of the lines overflowed and had comments in an inconvenient place - pkg/cmd/pulumi/destroy.go: `var x T = y` where `T` wasn't necessary - pkg/cmd/pulumi/policy_new.go: long line because of error message - pkg/backend/snapshot_test.go: long line trying to assign three variables in the same assignment I have included mention of gofumpt in the CONTRIBUTING.md.
2023-03-03 16:36:39 +00:00
allowUnknowns bool, ignoreChanges []string,
) (plugin.DiffResult, error) {
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
// Always reuquire replacement.
return plugin.DiffResult{ReplaceKeys: []resource.PropertyKey{"id"}}, nil
},
config: func(inputs resource.PropertyMap) error {
return nil
},
}, nil
}),
}
host := newPluginHost(t, loaders)
Don't load providers at startup This changes the provider registry to no longer load all the providers from the old state on startup (in `NewRegistry`) instead the load logic has been moved to the `Same` method. The step_executor and step_generator have been fixed up to ensure that for cases where a resource might not have had it's provider created yet (i.e. for DBR'ing the old version of a resource, for refreshes or deletes) they ask the `Deployment` to look up the provider in the old state and `Same` it in the registry. All of the above means we only load providers we're going to use (even taking --targets into account). One fix mot done in this change is to auto-update providers for deletes. That is given a program state with two resources both using V1 of a provider, if you run the program to update one of those resource to use V2 of the provider but to delete the other resource currently we'll still load V1 to do that delete. It _might_ be possible (although this is definitly questionable) to see that another resource changed it's provider from V1 to V2 and to just assume the same change should have happened to the deleted resource. This could be helpful for not loading old provider versions at all, but can be done in two passes now pretty easily. Just run `up` without any program changes except for the SDK version bump to update all the provider references to V2 of the provider, then do another `up` that deletes the second resource. Fixes https://github.com/pulumi/pulumi/issues/12177.
2023-04-12 09:35:20 +00:00
r := NewRegistry(host, true, nil)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
assert.NotNil(t, r)
for _, old := range olds {
ref, err := NewReference(old.URN, old.ID)
assert.NoError(t, err)
p, ok := r.GetProvider(ref)
Don't load providers at startup This changes the provider registry to no longer load all the providers from the old state on startup (in `NewRegistry`) instead the load logic has been moved to the `Same` method. The step_executor and step_generator have been fixed up to ensure that for cases where a resource might not have had it's provider created yet (i.e. for DBR'ing the old version of a resource, for refreshes or deletes) they ask the `Deployment` to look up the provider in the old state and `Same` it in the registry. All of the above means we only load providers we're going to use (even taking --targets into account). One fix mot done in this change is to auto-update providers for deletes. That is given a program state with two resources both using V1 of a provider, if you run the program to update one of those resource to use V2 of the provider but to delete the other resource currently we'll still load V1 to do that delete. It _might_ be possible (although this is definitly questionable) to see that another resource changed it's provider from V1 to V2 and to just assume the same change should have happened to the deleted resource. This could be helpful for not loading old provider versions at all, but can be done in two passes now pretty easily. Just run `up` without any program changes except for the SDK version bump to update all the provider references to V2 of the provider, then do another `up` that deletes the second resource. Fixes https://github.com/pulumi/pulumi/issues/12177.
2023-04-12 09:35:20 +00:00
assert.False(t, ok)
assert.Nil(t, p)
// "Same" the provider to add it to registry
err = r.Same(old)
assert.NoError(t, err)
// Now we should be able to get it
p, ok = r.GetProvider(ref)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
assert.True(t, ok)
assert.NotNil(t, p)
assert.Equal(t, GetProviderPackage(old.Type), p.Pkg())
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
}
// Create a new provider for each package.
for _, l := range loaders {
typ := MakeProviderType(l.pkg)
urn := resource.NewURN("test", "test", "", typ, "b")
olds, news := resource.PropertyMap{}, resource.PropertyMap{}
// Check
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
check, err := r.Check(context.Background(), plugin.CheckRequest{
URN: urn,
Olds: olds,
News: news,
})
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
assert.NoError(t, err)
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
assert.Equal(t, news, check.Properties)
assert.Empty(t, check.Failures)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
// The provider should not be configured: configuration will occur during the previewed Create.
Reuse provider instances where possible (#14127) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes https://github.com/pulumi/pulumi/issues/13987. This reworks the registry to better track provider instances such that we can reuse unconfigured instances between Creates, Updates, and Sames. When we allocate a provider instance in the registry for a Check call we save it with the special id "unconfigured". This value should never make its way back to program SDKs, it's purely an internal value for the engine. When we do a Create, Update or Same we look to see if there's an unconfigured provider to use and if so configures that one, else it starts up a fresh one. (N.B. Update we can assume there will always be an unconfigured one from the Check call before). This has also fixed registry Create to use the ID `UnknownID` rather than `""`, have added some contract assertions to check that and fixed up some test fallout because of that (the tests had been getting away with leaving ID blank before). ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-10-12 20:46:01 +00:00
p, ok := r.GetProvider(Reference{urn: urn, id: UnconfiguredID})
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
assert.True(t, ok)
assert.False(t, p.(*testProvider).configured)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
}
// Update the existing provider for the first entry in olds.
{
urn, id := olds[0].URN, olds[0].ID
olds, news := olds[0].Inputs, olds[0].Inputs
// Fetch the old provider instance.
old, ok := r.GetProvider(Reference{urn: urn, id: id})
assert.True(t, ok)
// Check
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
check, err := r.Check(context.Background(), plugin.CheckRequest{
URN: urn,
Olds: olds,
News: news,
})
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
assert.NoError(t, err)
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
assert.Equal(t, news, check.Properties)
assert.Empty(t, check.Failures)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
// The provider should remain unconfigured.
Reuse provider instances where possible (#14127) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes https://github.com/pulumi/pulumi/issues/13987. This reworks the registry to better track provider instances such that we can reuse unconfigured instances between Creates, Updates, and Sames. When we allocate a provider instance in the registry for a Check call we save it with the special id "unconfigured". This value should never make its way back to program SDKs, it's purely an internal value for the engine. When we do a Create, Update or Same we look to see if there's an unconfigured provider to use and if so configures that one, else it starts up a fresh one. (N.B. Update we can assume there will always be an unconfigured one from the Check call before). This has also fixed registry Create to use the ID `UnknownID` rather than `""`, have added some contract assertions to check that and fixed up some test fallout because of that (the tests had been getting away with leaving ID blank before). ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-10-12 20:46:01 +00:00
p, ok := r.GetProvider(Reference{urn: urn, id: UnconfiguredID})
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
assert.True(t, ok)
assert.False(t, p == old)
assert.False(t, p.(*testProvider).configured)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
// Diff
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
diff, err := r.Diff(context.Background(), plugin.DiffRequest{
URN: urn,
ID: id,
OldOutputs: olds,
NewInputs: news,
})
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
assert.NoError(t, err)
assert.Equal(t, plugin.DiffResult{Changes: plugin.DiffNone}, diff)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
// The original provider should be used because the config did not change.
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
p2, ok := r.GetProvider(Reference{urn: urn, id: id})
assert.True(t, ok)
assert.True(t, p2 == old)
assert.False(t, p2 == p)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
}
// Replace the existing provider for the last entry in olds.
{
urn, id := olds[len(olds)-1].URN, olds[len(olds)-1].ID
olds, news := olds[len(olds)-1].Inputs, olds[len(olds)-1].Inputs
// Fetch the old provider instance.
old, ok := r.GetProvider(Reference{urn: urn, id: id})
assert.True(t, ok)
// Check
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
check, err := r.Check(context.Background(), plugin.CheckRequest{
URN: urn,
Olds: olds,
News: news,
})
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
assert.NoError(t, err)
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
assert.Equal(t, news, check.Properties)
assert.Empty(t, check.Failures)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
// The provider should remain unconfigured.
Reuse provider instances where possible (#14127) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes https://github.com/pulumi/pulumi/issues/13987. This reworks the registry to better track provider instances such that we can reuse unconfigured instances between Creates, Updates, and Sames. When we allocate a provider instance in the registry for a Check call we save it with the special id "unconfigured". This value should never make its way back to program SDKs, it's purely an internal value for the engine. When we do a Create, Update or Same we look to see if there's an unconfigured provider to use and if so configures that one, else it starts up a fresh one. (N.B. Update we can assume there will always be an unconfigured one from the Check call before). This has also fixed registry Create to use the ID `UnknownID` rather than `""`, have added some contract assertions to check that and fixed up some test fallout because of that (the tests had been getting away with leaving ID blank before). ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-10-12 20:46:01 +00:00
p, ok := r.GetProvider(Reference{urn: urn, id: UnconfiguredID})
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
assert.True(t, ok)
assert.False(t, p == old)
assert.False(t, p.(*testProvider).configured)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
// Diff
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
diff, err := r.Diff(context.Background(), plugin.DiffRequest{
URN: urn,
ID: id,
OldOutputs: olds,
NewInputs: news,
})
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
assert.NoError(t, err)
assert.True(t, diff.Replace())
// The new provider should be not be registered; the registered provider should still be the original.
p2, ok := r.GetProvider(Reference{urn: urn, id: id})
assert.True(t, ok)
assert.True(t, p2 == old)
assert.False(t, p2 == p)
}
}
func TestCRUDNoProviders(t *testing.T) {
t.Parallel()
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
host := newPluginHost(t, []*providerLoader{})
Don't load providers at startup This changes the provider registry to no longer load all the providers from the old state on startup (in `NewRegistry`) instead the load logic has been moved to the `Same` method. The step_executor and step_generator have been fixed up to ensure that for cases where a resource might not have had it's provider created yet (i.e. for DBR'ing the old version of a resource, for refreshes or deletes) they ask the `Deployment` to look up the provider in the old state and `Same` it in the registry. All of the above means we only load providers we're going to use (even taking --targets into account). One fix mot done in this change is to auto-update providers for deletes. That is given a program state with two resources both using V1 of a provider, if you run the program to update one of those resource to use V2 of the provider but to delete the other resource currently we'll still load V1 to do that delete. It _might_ be possible (although this is definitly questionable) to see that another resource changed it's provider from V1 to V2 and to just assume the same change should have happened to the deleted resource. This could be helpful for not loading old provider versions at all, but can be done in two passes now pretty easily. Just run `up` without any program changes except for the SDK version bump to update all the provider references to V2 of the provider, then do another `up` that deletes the second resource. Fixes https://github.com/pulumi/pulumi/issues/12177.
2023-04-12 09:35:20 +00:00
r := NewRegistry(host, false, nil)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
assert.NotNil(t, r)
typ := MakeProviderType("pkgA")
urn := resource.NewURN("test", "test", "", typ, "b")
olds, news := resource.PropertyMap{}, resource.PropertyMap{}
// Check
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
check, err := r.Check(context.Background(), plugin.CheckRequest{
URN: urn,
Olds: olds,
News: news,
})
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
assert.Error(t, err)
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
assert.Empty(t, check.Failures)
assert.Nil(t, check.Properties)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
}
func TestCRUDWrongPackage(t *testing.T) {
t.Parallel()
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
loaders := []*providerLoader{
newSimpleLoader(t, "pkgB", "", nil),
}
host := newPluginHost(t, loaders)
Don't load providers at startup This changes the provider registry to no longer load all the providers from the old state on startup (in `NewRegistry`) instead the load logic has been moved to the `Same` method. The step_executor and step_generator have been fixed up to ensure that for cases where a resource might not have had it's provider created yet (i.e. for DBR'ing the old version of a resource, for refreshes or deletes) they ask the `Deployment` to look up the provider in the old state and `Same` it in the registry. All of the above means we only load providers we're going to use (even taking --targets into account). One fix mot done in this change is to auto-update providers for deletes. That is given a program state with two resources both using V1 of a provider, if you run the program to update one of those resource to use V2 of the provider but to delete the other resource currently we'll still load V1 to do that delete. It _might_ be possible (although this is definitly questionable) to see that another resource changed it's provider from V1 to V2 and to just assume the same change should have happened to the deleted resource. This could be helpful for not loading old provider versions at all, but can be done in two passes now pretty easily. Just run `up` without any program changes except for the SDK version bump to update all the provider references to V2 of the provider, then do another `up` that deletes the second resource. Fixes https://github.com/pulumi/pulumi/issues/12177.
2023-04-12 09:35:20 +00:00
r := NewRegistry(host, false, nil)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
assert.NotNil(t, r)
typ := MakeProviderType("pkgA")
urn := resource.NewURN("test", "test", "", typ, "b")
olds, news := resource.PropertyMap{}, resource.PropertyMap{}
// Check
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
check, err := r.Check(context.Background(), plugin.CheckRequest{
URN: urn,
Olds: olds,
News: news,
})
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
assert.Error(t, err)
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
assert.Empty(t, check.Failures)
assert.Nil(t, check.Properties)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
}
func TestCRUDWrongVersion(t *testing.T) {
t.Parallel()
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
loaders := []*providerLoader{
newSimpleLoader(t, "pkgA", "0.5.0", nil),
}
host := newPluginHost(t, loaders)
Don't load providers at startup This changes the provider registry to no longer load all the providers from the old state on startup (in `NewRegistry`) instead the load logic has been moved to the `Same` method. The step_executor and step_generator have been fixed up to ensure that for cases where a resource might not have had it's provider created yet (i.e. for DBR'ing the old version of a resource, for refreshes or deletes) they ask the `Deployment` to look up the provider in the old state and `Same` it in the registry. All of the above means we only load providers we're going to use (even taking --targets into account). One fix mot done in this change is to auto-update providers for deletes. That is given a program state with two resources both using V1 of a provider, if you run the program to update one of those resource to use V2 of the provider but to delete the other resource currently we'll still load V1 to do that delete. It _might_ be possible (although this is definitly questionable) to see that another resource changed it's provider from V1 to V2 and to just assume the same change should have happened to the deleted resource. This could be helpful for not loading old provider versions at all, but can be done in two passes now pretty easily. Just run `up` without any program changes except for the SDK version bump to update all the provider references to V2 of the provider, then do another `up` that deletes the second resource. Fixes https://github.com/pulumi/pulumi/issues/12177.
2023-04-12 09:35:20 +00:00
r := NewRegistry(host, false, nil)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
assert.NotNil(t, r)
typ := MakeProviderType("pkgA")
urn := resource.NewURN("test", "test", "", typ, "b")
olds, news := resource.PropertyMap{}, resource.PropertyMap{"version": resource.NewStringProperty("1.0.0")}
// Check
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
check, err := r.Check(context.Background(), plugin.CheckRequest{
URN: urn,
Olds: olds,
News: news,
})
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
assert.Error(t, err)
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
assert.Empty(t, check.Failures)
assert.Nil(t, check.Properties)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
}
func TestCRUDBadVersionNotString(t *testing.T) {
t.Parallel()
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
loaders := []*providerLoader{
newSimpleLoader(t, "pkgA", "1.0.0", nil),
}
host := newPluginHost(t, loaders)
Don't load providers at startup This changes the provider registry to no longer load all the providers from the old state on startup (in `NewRegistry`) instead the load logic has been moved to the `Same` method. The step_executor and step_generator have been fixed up to ensure that for cases where a resource might not have had it's provider created yet (i.e. for DBR'ing the old version of a resource, for refreshes or deletes) they ask the `Deployment` to look up the provider in the old state and `Same` it in the registry. All of the above means we only load providers we're going to use (even taking --targets into account). One fix mot done in this change is to auto-update providers for deletes. That is given a program state with two resources both using V1 of a provider, if you run the program to update one of those resource to use V2 of the provider but to delete the other resource currently we'll still load V1 to do that delete. It _might_ be possible (although this is definitly questionable) to see that another resource changed it's provider from V1 to V2 and to just assume the same change should have happened to the deleted resource. This could be helpful for not loading old provider versions at all, but can be done in two passes now pretty easily. Just run `up` without any program changes except for the SDK version bump to update all the provider references to V2 of the provider, then do another `up` that deletes the second resource. Fixes https://github.com/pulumi/pulumi/issues/12177.
2023-04-12 09:35:20 +00:00
r := NewRegistry(host, false, nil)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
assert.NotNil(t, r)
typ := MakeProviderType("pkgA")
urn := resource.NewURN("test", "test", "", typ, "b")
olds, news := resource.PropertyMap{}, resource.PropertyMap{"version": resource.NewBoolProperty(true)}
// Check
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
check, err := r.Check(context.Background(), plugin.CheckRequest{
URN: urn,
Olds: olds,
News: news,
})
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
assert.NoError(t, err)
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
assert.Len(t, check.Failures, 1)
assert.Equal(t, "version", string(check.Failures[0].Property))
assert.Nil(t, check.Properties)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
}
func TestCRUDBadVersion(t *testing.T) {
t.Parallel()
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
loaders := []*providerLoader{
newSimpleLoader(t, "pkgA", "1.0.0", nil),
}
host := newPluginHost(t, loaders)
Don't load providers at startup This changes the provider registry to no longer load all the providers from the old state on startup (in `NewRegistry`) instead the load logic has been moved to the `Same` method. The step_executor and step_generator have been fixed up to ensure that for cases where a resource might not have had it's provider created yet (i.e. for DBR'ing the old version of a resource, for refreshes or deletes) they ask the `Deployment` to look up the provider in the old state and `Same` it in the registry. All of the above means we only load providers we're going to use (even taking --targets into account). One fix mot done in this change is to auto-update providers for deletes. That is given a program state with two resources both using V1 of a provider, if you run the program to update one of those resource to use V2 of the provider but to delete the other resource currently we'll still load V1 to do that delete. It _might_ be possible (although this is definitly questionable) to see that another resource changed it's provider from V1 to V2 and to just assume the same change should have happened to the deleted resource. This could be helpful for not loading old provider versions at all, but can be done in two passes now pretty easily. Just run `up` without any program changes except for the SDK version bump to update all the provider references to V2 of the provider, then do another `up` that deletes the second resource. Fixes https://github.com/pulumi/pulumi/issues/12177.
2023-04-12 09:35:20 +00:00
r := NewRegistry(host, false, nil)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
assert.NotNil(t, r)
typ := MakeProviderType("pkgA")
urn := resource.NewURN("test", "test", "", typ, "b")
olds, news := resource.PropertyMap{}, resource.PropertyMap{"version": resource.NewStringProperty("foo")}
// Check
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
check, err := r.Check(context.Background(), plugin.CheckRequest{
URN: urn,
Olds: olds,
News: news,
})
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
assert.NoError(t, err)
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
assert.Len(t, check.Failures, 1)
assert.Equal(t, "version", string(check.Failures[0].Property))
assert.Nil(t, check.Properties)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
}
//nolint:paralleltest
func TestLoadProvider_missingError(t *testing.T) {
var count int
srv := httptest.NewServer(http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
count++
w.WriteHeader(http.StatusInternalServerError)
}))
defer srv.Close()
version := semver.MustParse("1.2.3")
loader := newLoader(t, "myplugin", "1.2.3",
func(p tokens.Package, v semver.Version) (plugin.Provider, error) {
return nil, workspace.NewMissingError(
apitype.ResourcePlugin, "myplugin", &version, false /* ambient */)
})
host := newPluginHost(t, []*providerLoader{loader})
t.Run("PULUMI_DISABLE_AUTOMATIC_PLUGIN_ACQUISITION=true", func(t *testing.T) {
t.Setenv("PULUMI_DISABLE_AUTOMATIC_PLUGIN_ACQUISITION", "true")
_, err := loadProvider(
"myplugin", &version, srv.URL,
nil, host, nil /* builtins */)
assert.ErrorContains(t, err,
"no resource plugin 'pulumi-resource-myplugin' found in the workspace at version v1.2.3")
assert.Equal(t, 0, count)
})
t.Run("PULUMI_DISABLE_AUTOMATIC_PLUGIN_ACQUISITION=false", func(t *testing.T) {
t.Setenv("PULUMI_DISABLE_AUTOMATIC_PLUGIN_ACQUISITION", "false")
_, err := loadProvider(
"myplugin", &version, srv.URL,
nil, host, nil /* builtins */)
assert.ErrorContains(t, err,
"Could not automatically download and install resource plugin 'pulumi-resource-myplugin' at version v1.2.3")
assert.ErrorContains(t, err,
fmt.Sprintf("install the plugin using `pulumi plugin install resource myplugin v1.2.3 --server %s`", srv.URL))
assert.Equal(t, 5, count)
})
}
func TestConcurrentRegistryUsage(t *testing.T) {
// Regression test for https://github.com/pulumi/pulumi/issues/13491, make sure we can use registry in
// parallel.
t.Parallel()
loaders := []*providerLoader{
newSimpleLoader(t, "pkgA", "1.0.0", nil),
}
host := newPluginHost(t, loaders)
r := NewRegistry(host, false, nil)
assert.NotNil(t, r)
// We're going to create a few thousand providers in parallel, registering a load of aliases for each of
// them.
var wg sync.WaitGroup
for i := 0; i < 1000; i++ {
wg.Add(1)
go func(i int) {
defer wg.Done()
typ := MakeProviderType("pkgA")
Allow anything in resource names (#14107) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes https://github.com/pulumi/pulumi/issues/13968. Fixes https://github.com/pulumi/pulumi/issues/8949. This requires changing the parsing of URN's slightly, it is _very_ likely that providers will need to update to handle URNs like this correctly. This changes resource names to be `string` not `QName`. We never validated this before and it turns out that users have put all manner of text for resource names so we just updating the system to correctly reflect that. ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [x] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [x] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-11-20 08:59:00 +00:00
providerURN := resource.NewURN("test", "test", "", typ, fmt.Sprintf("p%d", i))
for j := 0; j < 1000; j++ {
Allow anything in resource names (#14107) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes https://github.com/pulumi/pulumi/issues/13968. Fixes https://github.com/pulumi/pulumi/issues/8949. This requires changing the parsing of URN's slightly, it is _very_ likely that providers will need to update to handle URNs like this correctly. This changes resource names to be `string` not `QName`. We never validated this before and it turns out that users have put all manner of text for resource names so we just updating the system to correctly reflect that. ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [x] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [x] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-11-20 08:59:00 +00:00
aliasURN := resource.NewURN("test", "test", "", typ, fmt.Sprintf("p%d_%d", i, j))
r.RegisterAlias(providerURN, aliasURN)
}
// Now check that we can get the provider back.
olds, news := resource.PropertyMap{}, resource.PropertyMap{"version": resource.NewBoolProperty(true)}
// Check
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
check, err := r.Check(context.Background(), plugin.CheckRequest{
URN: providerURN,
Olds: olds,
News: news,
})
assert.NoError(t, err)
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
assert.Len(t, check.Failures, 1)
assert.Equal(t, "version", string(check.Failures[0].Property))
assert.Nil(t, check.Properties)
}(i)
}
}
func TestRegistry(t *testing.T) {
t.Parallel()
t.Run("Close", func(t *testing.T) {
t.Parallel()
r := &Registry{}
assert.Nil(t, r.Close())
// Ensure idempotent.
assert.Nil(t, r.Close())
})
t.Run("Pkg", func(t *testing.T) {
t.Parallel()
r := &Registry{}
assert.Equal(t, tokens.Package("pulumi"), r.Pkg())
})
t.Run("GetSchema", func(t *testing.T) {
t.Parallel()
r := &Registry{}
assert.Panics(t, func() {
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
_, _ = r.GetSchema(context.Background(), plugin.GetSchemaRequest{})
})
})
t.Run("GetMapping", func(t *testing.T) {
t.Parallel()
r := &Registry{}
assert.Panics(t, func() {
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
_, _ = r.GetMapping(context.Background(), plugin.GetMappingRequest{})
})
})
t.Run("GetMappings", func(t *testing.T) {
t.Parallel()
r := &Registry{}
assert.Panics(t, func() {
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
_, _ = r.GetMappings(context.Background(), plugin.GetMappingsRequest{})
})
})
t.Run("CheckConfig", func(t *testing.T) {
t.Parallel()
r := &Registry{}
assert.Panics(t, func() {
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
_, _ = r.CheckConfig(context.Background(), plugin.CheckConfigRequest{AllowUnknowns: true})
})
})
t.Run("DiffConfig", func(t *testing.T) {
t.Parallel()
r := &Registry{}
assert.Panics(t, func() {
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
_, _ = r.DiffConfig(context.Background(), plugin.DiffConfigRequest{AllowUnknowns: true})
})
})
t.Run("Configure", func(t *testing.T) {
t.Parallel()
r := &Registry{}
assert.Panics(t, func() {
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
_, _ = r.Configure(context.Background(), plugin.ConfigureRequest{})
})
})
t.Run("Read", func(t *testing.T) {
t.Parallel()
r := &Registry{}
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
_, err := r.Read(context.Background(), plugin.ReadRequest{})
assert.ErrorContains(t, err, "provider resources may not be read")
})
t.Run("Construct", func(t *testing.T) {
t.Parallel()
r := &Registry{}
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
_, err := r.Construct(context.Background(), plugin.ConstructRequest{})
assert.ErrorContains(t, err, "provider resources may not be constructed")
})
t.Run("Invoke", func(t *testing.T) {
t.Parallel()
r := &Registry{}
assert.Panics(t, func() {
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
_, _ = r.Invoke(context.Background(), plugin.InvokeRequest{})
})
})
t.Run("StreamInvoke", func(t *testing.T) {
t.Parallel()
r := &Registry{}
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
_, err := r.StreamInvoke(context.Background(), plugin.StreamInvokeRequest{})
assert.ErrorContains(t, err, "the provider registry does not implement streaming invokes")
})
t.Run("Call", func(t *testing.T) {
t.Parallel()
r := &Registry{}
assert.Panics(t, func() {
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
_, _ = r.Call(context.Background(), plugin.CallRequest{})
})
})
t.Run("GetPluginInfo", func(t *testing.T) {
t.Parallel()
r := &Registry{}
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
_, err := r.GetPluginInfo(context.Background())
assert.ErrorContains(t, err, "the provider registry does not report plugin info")
})
t.Run("SignalCancellation", func(t *testing.T) {
t.Parallel()
r := &Registry{}
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
assert.Nil(t, r.SignalCancellation(context.Background()))
})
}