pulumi/sdk/python/lib/setup.py

54 lines
1.6 KiB
Python
Raw Permalink Normal View History

# Copyright 2016-2022, Pulumi Corporation.
2018-05-22 19:43:36 +00:00
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
Get the empty Python program working This change gets enough of the Python SDK up and running that the empty Python program will work. Mostly just scaffolding, but the basic structure is now in place. The primary remaining work is to wire up resource creation to the gRPC interfaces. In summary: * The basic structure is as follows: - Everything goes into sdk/python/. - sdk/python/cmd/pulumi-langhost-python is a Go language host that simply knows how to spawn Python processes to run out entrypoint in response to requests by the engine. - sdk/python/cmd/pulumi-langhost-python-exec is a little Python shim that is invoked by the language host to run Python programs, and is responsible for setting up the minimal goo before we can do so (RPC connections and the like). - sdk/python/lib/ contains a Python Pip package suitable for PyPi. - In there, we have two packages: the root pulumi package that contains all of the basic Pulumi programming model abstractions, and pulumi.runtime, which contains the implementation of resource registration, RPC interfacing with the engine, and so on. * Add logic in our test framework to conditionalize on the language type and react accordingly. This will allow us to skip Yarn for Python projects and eventually run Pip if there's a requirements.txt. * Created the basic project structure, including all of the usual Make targets for installing into the proper places. * Building also runs Pylint and we are clean. There are a few other minor things in here: * Add an "empty" test for both Node.js and Python. These pass. * Fix an existing bug in plugin shutdown logic. At some point, we started waiting for stderr/stdout to flush before shutting down the plugin; but if certain failures happen "early" during the plugin launch process, these channels will never get initialized and so waiting for them deadlocks. * Recently we seem to have added logic to delete test temp directories if a failure happened during initialization of said temp directories. This is unfortunate, because you often need to look at the temp directory to see what failed. We already clean them up elsewhere after the full test completes successfully, so I don't think we need to be doing this, and I've removed it. Still many loose ends (config, resources, etc), but it's a start!
2018-01-13 18:29:34 +00:00
"""The Pulumi Python SDK."""
Test GetDependencies and library versions in conformance testing (#15324) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> This adds testing to the language conformance test command to check that GetProgramDependencies returns the expected data. ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [x] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-02-06 12:38:44 +00:00
import os
from setuptools import find_packages, setup
Test GetDependencies and library versions in conformance testing (#15324) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> This adds testing to the language conformance test command to check that GetProgramDependencies returns the expected data. ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [x] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-02-06 12:38:44 +00:00
VERSION = os.getenv("PULUMI_PYTHON_VERSION", "3.0.0")
def readme():
try:
with open('README.md', encoding='utf-8') as f:
return f.read()
except FileNotFoundError:
return "Pulumi's Python SDK - Development Version"
Get the empty Python program working This change gets enough of the Python SDK up and running that the empty Python program will work. Mostly just scaffolding, but the basic structure is now in place. The primary remaining work is to wire up resource creation to the gRPC interfaces. In summary: * The basic structure is as follows: - Everything goes into sdk/python/. - sdk/python/cmd/pulumi-langhost-python is a Go language host that simply knows how to spawn Python processes to run out entrypoint in response to requests by the engine. - sdk/python/cmd/pulumi-langhost-python-exec is a little Python shim that is invoked by the language host to run Python programs, and is responsible for setting up the minimal goo before we can do so (RPC connections and the like). - sdk/python/lib/ contains a Python Pip package suitable for PyPi. - In there, we have two packages: the root pulumi package that contains all of the basic Pulumi programming model abstractions, and pulumi.runtime, which contains the implementation of resource registration, RPC interfacing with the engine, and so on. * Add logic in our test framework to conditionalize on the language type and react accordingly. This will allow us to skip Yarn for Python projects and eventually run Pip if there's a requirements.txt. * Created the basic project structure, including all of the usual Make targets for installing into the proper places. * Building also runs Pylint and we are clean. There are a few other minor things in here: * Add an "empty" test for both Node.js and Python. These pass. * Fix an existing bug in plugin shutdown logic. At some point, we started waiting for stderr/stdout to flush before shutting down the plugin; but if certain failures happen "early" during the plugin launch process, these channels will never get initialized and so waiting for them deadlocks. * Recently we seem to have added logic to delete test temp directories if a failure happened during initialization of said temp directories. This is unfortunate, because you often need to look at the temp directory to see what failed. We already clean them up elsewhere after the full test completes successfully, so I don't think we need to be doing this, and I've removed it. Still many loose ends (config, resources, etc), but it's a start!
2018-01-13 18:29:34 +00:00
setup(name='pulumi',
version=VERSION,
Get the empty Python program working This change gets enough of the Python SDK up and running that the empty Python program will work. Mostly just scaffolding, but the basic structure is now in place. The primary remaining work is to wire up resource creation to the gRPC interfaces. In summary: * The basic structure is as follows: - Everything goes into sdk/python/. - sdk/python/cmd/pulumi-langhost-python is a Go language host that simply knows how to spawn Python processes to run out entrypoint in response to requests by the engine. - sdk/python/cmd/pulumi-langhost-python-exec is a little Python shim that is invoked by the language host to run Python programs, and is responsible for setting up the minimal goo before we can do so (RPC connections and the like). - sdk/python/lib/ contains a Python Pip package suitable for PyPi. - In there, we have two packages: the root pulumi package that contains all of the basic Pulumi programming model abstractions, and pulumi.runtime, which contains the implementation of resource registration, RPC interfacing with the engine, and so on. * Add logic in our test framework to conditionalize on the language type and react accordingly. This will allow us to skip Yarn for Python projects and eventually run Pip if there's a requirements.txt. * Created the basic project structure, including all of the usual Make targets for installing into the proper places. * Building also runs Pylint and we are clean. There are a few other minor things in here: * Add an "empty" test for both Node.js and Python. These pass. * Fix an existing bug in plugin shutdown logic. At some point, we started waiting for stderr/stdout to flush before shutting down the plugin; but if certain failures happen "early" during the plugin launch process, these channels will never get initialized and so waiting for them deadlocks. * Recently we seem to have added logic to delete test temp directories if a failure happened during initialization of said temp directories. This is unfortunate, because you often need to look at the temp directory to see what failed. We already clean them up elsewhere after the full test completes successfully, so I don't think we need to be doing this, and I've removed it. Still many loose ends (config, resources, etc), but it's a start!
2018-01-13 18:29:34 +00:00
description='Pulumi\'s Python SDK',
long_description=readme(),
long_description_content_type='text/markdown',
Get the empty Python program working This change gets enough of the Python SDK up and running that the empty Python program will work. Mostly just scaffolding, but the basic structure is now in place. The primary remaining work is to wire up resource creation to the gRPC interfaces. In summary: * The basic structure is as follows: - Everything goes into sdk/python/. - sdk/python/cmd/pulumi-langhost-python is a Go language host that simply knows how to spawn Python processes to run out entrypoint in response to requests by the engine. - sdk/python/cmd/pulumi-langhost-python-exec is a little Python shim that is invoked by the language host to run Python programs, and is responsible for setting up the minimal goo before we can do so (RPC connections and the like). - sdk/python/lib/ contains a Python Pip package suitable for PyPi. - In there, we have two packages: the root pulumi package that contains all of the basic Pulumi programming model abstractions, and pulumi.runtime, which contains the implementation of resource registration, RPC interfacing with the engine, and so on. * Add logic in our test framework to conditionalize on the language type and react accordingly. This will allow us to skip Yarn for Python projects and eventually run Pip if there's a requirements.txt. * Created the basic project structure, including all of the usual Make targets for installing into the proper places. * Building also runs Pylint and we are clean. There are a few other minor things in here: * Add an "empty" test for both Node.js and Python. These pass. * Fix an existing bug in plugin shutdown logic. At some point, we started waiting for stderr/stdout to flush before shutting down the plugin; but if certain failures happen "early" during the plugin launch process, these channels will never get initialized and so waiting for them deadlocks. * Recently we seem to have added logic to delete test temp directories if a failure happened during initialization of said temp directories. This is unfortunate, because you often need to look at the temp directory to see what failed. We already clean them up elsewhere after the full test completes successfully, so I don't think we need to be doing this, and I've removed it. Still many loose ends (config, resources, etc), but it's a start!
2018-01-13 18:29:34 +00:00
url='https://github.com/pulumi/pulumi',
license='Apache 2.0',
packages=find_packages(exclude=("test*",)),
package_data={
'pulumi': [
'py.typed'
]
},
python_requires='>=3.8',
# Keep this list in sync with Pipfile
install_requires=[
'protobuf~=4.21',
'grpcio~=1.60.1',
'dill~=0.3',
'six~=1.12',
'semver~=2.13',
'pyyaml~=6.0'
],
Get the empty Python program working This change gets enough of the Python SDK up and running that the empty Python program will work. Mostly just scaffolding, but the basic structure is now in place. The primary remaining work is to wire up resource creation to the gRPC interfaces. In summary: * The basic structure is as follows: - Everything goes into sdk/python/. - sdk/python/cmd/pulumi-langhost-python is a Go language host that simply knows how to spawn Python processes to run out entrypoint in response to requests by the engine. - sdk/python/cmd/pulumi-langhost-python-exec is a little Python shim that is invoked by the language host to run Python programs, and is responsible for setting up the minimal goo before we can do so (RPC connections and the like). - sdk/python/lib/ contains a Python Pip package suitable for PyPi. - In there, we have two packages: the root pulumi package that contains all of the basic Pulumi programming model abstractions, and pulumi.runtime, which contains the implementation of resource registration, RPC interfacing with the engine, and so on. * Add logic in our test framework to conditionalize on the language type and react accordingly. This will allow us to skip Yarn for Python projects and eventually run Pip if there's a requirements.txt. * Created the basic project structure, including all of the usual Make targets for installing into the proper places. * Building also runs Pylint and we are clean. There are a few other minor things in here: * Add an "empty" test for both Node.js and Python. These pass. * Fix an existing bug in plugin shutdown logic. At some point, we started waiting for stderr/stdout to flush before shutting down the plugin; but if certain failures happen "early" during the plugin launch process, these channels will never get initialized and so waiting for them deadlocks. * Recently we seem to have added logic to delete test temp directories if a failure happened during initialization of said temp directories. This is unfortunate, because you often need to look at the temp directory to see what failed. We already clean them up elsewhere after the full test completes successfully, so I don't think we need to be doing this, and I've removed it. Still many loose ends (config, resources, etc), but it's a start!
2018-01-13 18:29:34 +00:00
zip_safe=False)