Initial support for remote component construction. (#5280)
These changes add initial support for the construction of remote
components. For now, this support is limited to the NodeJS SDK;
follow-up changes will implement support for the other SDKs.
Remote components are component resources that are constructed and
managed by plugins rather than by Pulumi programs. In this sense, they
are a bit like cloud resources, and are supported by the same
distribution and plugin loading mechanisms and described by the same
schema system.
The construction of a remote component is initiated by a
`RegisterResourceRequest` with the new `remote` field set to `true`.
When the resource monitor receives such a request, it loads the plugin
that implements the component resource and calls the `Construct`
method added to the resource provider interface as part of these
changes. This method accepts the information necessary to construct the
component and its children: the component's name, type, resource
options, inputs, and input dependencies. It is responsible for
dispatching to the appropriate component factory to create the
component, then returning its URN, resolved output properties, and
output property dependencies. The dependency information is necessary to
support features such as delete-before-replace, which rely on precise
dependency information for custom resources.
These changes also add initial support for more conveniently
implementing resource providers in NodeJS. The interface used to
implement such a provider is similar to the dynamic provider interface
(and may be unified with that interface in the future).
An example of a NodeJS program constructing a remote component resource
also implemented in NodeJS can be found in
`tests/construct_component/nodejs`.
This is the core of #2430.
2020-09-08 02:33:55 +00:00
|
|
|
// Copyright 2016-2018, Pulumi Corporation.
|
|
|
|
//
|
|
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
|
|
// you may not use this file except in compliance with the License.
|
|
|
|
// You may obtain a copy of the License at
|
|
|
|
//
|
|
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
//
|
|
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
|
|
// See the License for the specific language governing permissions and
|
|
|
|
// limitations under the License.
|
|
|
|
|
|
|
|
import { Input, Inputs } from "../output";
|
|
|
|
import * as resource from "../resource";
|
|
|
|
|
|
|
|
/**
|
2024-07-15 09:05:28 +00:00
|
|
|
* {@link CheckResult} represents the results of a call to
|
|
|
|
* {@link ResourceProvider.check}.
|
Initial support for remote component construction. (#5280)
These changes add initial support for the construction of remote
components. For now, this support is limited to the NodeJS SDK;
follow-up changes will implement support for the other SDKs.
Remote components are component resources that are constructed and
managed by plugins rather than by Pulumi programs. In this sense, they
are a bit like cloud resources, and are supported by the same
distribution and plugin loading mechanisms and described by the same
schema system.
The construction of a remote component is initiated by a
`RegisterResourceRequest` with the new `remote` field set to `true`.
When the resource monitor receives such a request, it loads the plugin
that implements the component resource and calls the `Construct`
method added to the resource provider interface as part of these
changes. This method accepts the information necessary to construct the
component and its children: the component's name, type, resource
options, inputs, and input dependencies. It is responsible for
dispatching to the appropriate component factory to create the
component, then returning its URN, resolved output properties, and
output property dependencies. The dependency information is necessary to
support features such as delete-before-replace, which rely on precise
dependency information for custom resources.
These changes also add initial support for more conveniently
implementing resource providers in NodeJS. The interface used to
implement such a provider is similar to the dynamic provider interface
(and may be unified with that interface in the future).
An example of a NodeJS program constructing a remote component resource
also implemented in NodeJS can be found in
`tests/construct_component/nodejs`.
This is the core of #2430.
2020-09-08 02:33:55 +00:00
|
|
|
*/
|
|
|
|
export interface CheckResult {
|
|
|
|
/**
|
|
|
|
* The inputs to use, if any.
|
|
|
|
*/
|
|
|
|
readonly inputs?: any;
|
|
|
|
|
|
|
|
/**
|
|
|
|
* Any validation failures that occurred.
|
|
|
|
*/
|
|
|
|
readonly failures?: CheckFailure[];
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
2024-07-15 09:05:28 +00:00
|
|
|
* {@link CheckFailure} represents a single failure in the results of a call to
|
|
|
|
* {@link ResourceProvider.check}.
|
Initial support for remote component construction. (#5280)
These changes add initial support for the construction of remote
components. For now, this support is limited to the NodeJS SDK;
follow-up changes will implement support for the other SDKs.
Remote components are component resources that are constructed and
managed by plugins rather than by Pulumi programs. In this sense, they
are a bit like cloud resources, and are supported by the same
distribution and plugin loading mechanisms and described by the same
schema system.
The construction of a remote component is initiated by a
`RegisterResourceRequest` with the new `remote` field set to `true`.
When the resource monitor receives such a request, it loads the plugin
that implements the component resource and calls the `Construct`
method added to the resource provider interface as part of these
changes. This method accepts the information necessary to construct the
component and its children: the component's name, type, resource
options, inputs, and input dependencies. It is responsible for
dispatching to the appropriate component factory to create the
component, then returning its URN, resolved output properties, and
output property dependencies. The dependency information is necessary to
support features such as delete-before-replace, which rely on precise
dependency information for custom resources.
These changes also add initial support for more conveniently
implementing resource providers in NodeJS. The interface used to
implement such a provider is similar to the dynamic provider interface
(and may be unified with that interface in the future).
An example of a NodeJS program constructing a remote component resource
also implemented in NodeJS can be found in
`tests/construct_component/nodejs`.
This is the core of #2430.
2020-09-08 02:33:55 +00:00
|
|
|
*/
|
|
|
|
export interface CheckFailure {
|
|
|
|
/**
|
|
|
|
* The property that failed validation.
|
|
|
|
*/
|
|
|
|
readonly property: string;
|
|
|
|
|
|
|
|
/**
|
|
|
|
* The reason that the property failed validation.
|
|
|
|
*/
|
|
|
|
readonly reason: string;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
2024-07-15 09:05:28 +00:00
|
|
|
* {@link DiffResult} represents the results of a call to
|
|
|
|
* {@link ResourceProvider.diff}.
|
Initial support for remote component construction. (#5280)
These changes add initial support for the construction of remote
components. For now, this support is limited to the NodeJS SDK;
follow-up changes will implement support for the other SDKs.
Remote components are component resources that are constructed and
managed by plugins rather than by Pulumi programs. In this sense, they
are a bit like cloud resources, and are supported by the same
distribution and plugin loading mechanisms and described by the same
schema system.
The construction of a remote component is initiated by a
`RegisterResourceRequest` with the new `remote` field set to `true`.
When the resource monitor receives such a request, it loads the plugin
that implements the component resource and calls the `Construct`
method added to the resource provider interface as part of these
changes. This method accepts the information necessary to construct the
component and its children: the component's name, type, resource
options, inputs, and input dependencies. It is responsible for
dispatching to the appropriate component factory to create the
component, then returning its URN, resolved output properties, and
output property dependencies. The dependency information is necessary to
support features such as delete-before-replace, which rely on precise
dependency information for custom resources.
These changes also add initial support for more conveniently
implementing resource providers in NodeJS. The interface used to
implement such a provider is similar to the dynamic provider interface
(and may be unified with that interface in the future).
An example of a NodeJS program constructing a remote component resource
also implemented in NodeJS can be found in
`tests/construct_component/nodejs`.
This is the core of #2430.
2020-09-08 02:33:55 +00:00
|
|
|
*/
|
|
|
|
export interface DiffResult {
|
|
|
|
/**
|
|
|
|
* If true, this diff detected changes and suggests an update.
|
|
|
|
*/
|
|
|
|
readonly changes?: boolean;
|
|
|
|
|
|
|
|
/**
|
|
|
|
* If this update requires a replacement, the set of properties triggering it.
|
|
|
|
*/
|
|
|
|
readonly replaces?: string[];
|
|
|
|
|
|
|
|
/**
|
|
|
|
* An optional list of properties that will not ever change.
|
|
|
|
*/
|
|
|
|
readonly stables?: string[];
|
|
|
|
|
|
|
|
/**
|
2024-07-15 09:05:28 +00:00
|
|
|
* If true, and a replacement occurs, the resource will first be deleted
|
|
|
|
* before being recreated. This is to avoid potential side-by-side issues
|
|
|
|
* with the default create before delete behavior.
|
Initial support for remote component construction. (#5280)
These changes add initial support for the construction of remote
components. For now, this support is limited to the NodeJS SDK;
follow-up changes will implement support for the other SDKs.
Remote components are component resources that are constructed and
managed by plugins rather than by Pulumi programs. In this sense, they
are a bit like cloud resources, and are supported by the same
distribution and plugin loading mechanisms and described by the same
schema system.
The construction of a remote component is initiated by a
`RegisterResourceRequest` with the new `remote` field set to `true`.
When the resource monitor receives such a request, it loads the plugin
that implements the component resource and calls the `Construct`
method added to the resource provider interface as part of these
changes. This method accepts the information necessary to construct the
component and its children: the component's name, type, resource
options, inputs, and input dependencies. It is responsible for
dispatching to the appropriate component factory to create the
component, then returning its URN, resolved output properties, and
output property dependencies. The dependency information is necessary to
support features such as delete-before-replace, which rely on precise
dependency information for custom resources.
These changes also add initial support for more conveniently
implementing resource providers in NodeJS. The interface used to
implement such a provider is similar to the dynamic provider interface
(and may be unified with that interface in the future).
An example of a NodeJS program constructing a remote component resource
also implemented in NodeJS can be found in
`tests/construct_component/nodejs`.
This is the core of #2430.
2020-09-08 02:33:55 +00:00
|
|
|
*/
|
|
|
|
readonly deleteBeforeReplace?: boolean;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
2024-07-15 09:05:28 +00:00
|
|
|
* {@link CreateResult} represents the results of a call to
|
|
|
|
* {@link ResourceProvider.create}.
|
Initial support for remote component construction. (#5280)
These changes add initial support for the construction of remote
components. For now, this support is limited to the NodeJS SDK;
follow-up changes will implement support for the other SDKs.
Remote components are component resources that are constructed and
managed by plugins rather than by Pulumi programs. In this sense, they
are a bit like cloud resources, and are supported by the same
distribution and plugin loading mechanisms and described by the same
schema system.
The construction of a remote component is initiated by a
`RegisterResourceRequest` with the new `remote` field set to `true`.
When the resource monitor receives such a request, it loads the plugin
that implements the component resource and calls the `Construct`
method added to the resource provider interface as part of these
changes. This method accepts the information necessary to construct the
component and its children: the component's name, type, resource
options, inputs, and input dependencies. It is responsible for
dispatching to the appropriate component factory to create the
component, then returning its URN, resolved output properties, and
output property dependencies. The dependency information is necessary to
support features such as delete-before-replace, which rely on precise
dependency information for custom resources.
These changes also add initial support for more conveniently
implementing resource providers in NodeJS. The interface used to
implement such a provider is similar to the dynamic provider interface
(and may be unified with that interface in the future).
An example of a NodeJS program constructing a remote component resource
also implemented in NodeJS can be found in
`tests/construct_component/nodejs`.
This is the core of #2430.
2020-09-08 02:33:55 +00:00
|
|
|
*/
|
|
|
|
export interface CreateResult {
|
|
|
|
/**
|
|
|
|
* The ID of the created resource.
|
|
|
|
*/
|
|
|
|
readonly id: resource.ID;
|
|
|
|
|
|
|
|
/**
|
|
|
|
* Any properties that were computed during creation.
|
|
|
|
*/
|
|
|
|
readonly outs?: any;
|
|
|
|
}
|
|
|
|
|
2024-07-15 09:05:28 +00:00
|
|
|
/**
|
|
|
|
* {@link ReadResult} represents the results of a call to
|
|
|
|
* {@link ResourceProvider.read}.
|
|
|
|
*/
|
Initial support for remote component construction. (#5280)
These changes add initial support for the construction of remote
components. For now, this support is limited to the NodeJS SDK;
follow-up changes will implement support for the other SDKs.
Remote components are component resources that are constructed and
managed by plugins rather than by Pulumi programs. In this sense, they
are a bit like cloud resources, and are supported by the same
distribution and plugin loading mechanisms and described by the same
schema system.
The construction of a remote component is initiated by a
`RegisterResourceRequest` with the new `remote` field set to `true`.
When the resource monitor receives such a request, it loads the plugin
that implements the component resource and calls the `Construct`
method added to the resource provider interface as part of these
changes. This method accepts the information necessary to construct the
component and its children: the component's name, type, resource
options, inputs, and input dependencies. It is responsible for
dispatching to the appropriate component factory to create the
component, then returning its URN, resolved output properties, and
output property dependencies. The dependency information is necessary to
support features such as delete-before-replace, which rely on precise
dependency information for custom resources.
These changes also add initial support for more conveniently
implementing resource providers in NodeJS. The interface used to
implement such a provider is similar to the dynamic provider interface
(and may be unified with that interface in the future).
An example of a NodeJS program constructing a remote component resource
also implemented in NodeJS can be found in
`tests/construct_component/nodejs`.
This is the core of #2430.
2020-09-08 02:33:55 +00:00
|
|
|
export interface ReadResult {
|
|
|
|
/**
|
|
|
|
* The ID of the resource ready back (or blank if missing).
|
|
|
|
*/
|
|
|
|
readonly id?: resource.ID;
|
|
|
|
/**
|
|
|
|
* The current property state read from the live environment.
|
|
|
|
*/
|
|
|
|
readonly props?: any;
|
2023-11-30 16:22:51 +00:00
|
|
|
/**
|
|
|
|
* The inputs that would lead to the current resource state when importing it.
|
|
|
|
*/
|
|
|
|
readonly inputs?: any;
|
Initial support for remote component construction. (#5280)
These changes add initial support for the construction of remote
components. For now, this support is limited to the NodeJS SDK;
follow-up changes will implement support for the other SDKs.
Remote components are component resources that are constructed and
managed by plugins rather than by Pulumi programs. In this sense, they
are a bit like cloud resources, and are supported by the same
distribution and plugin loading mechanisms and described by the same
schema system.
The construction of a remote component is initiated by a
`RegisterResourceRequest` with the new `remote` field set to `true`.
When the resource monitor receives such a request, it loads the plugin
that implements the component resource and calls the `Construct`
method added to the resource provider interface as part of these
changes. This method accepts the information necessary to construct the
component and its children: the component's name, type, resource
options, inputs, and input dependencies. It is responsible for
dispatching to the appropriate component factory to create the
component, then returning its URN, resolved output properties, and
output property dependencies. The dependency information is necessary to
support features such as delete-before-replace, which rely on precise
dependency information for custom resources.
These changes also add initial support for more conveniently
implementing resource providers in NodeJS. The interface used to
implement such a provider is similar to the dynamic provider interface
(and may be unified with that interface in the future).
An example of a NodeJS program constructing a remote component resource
also implemented in NodeJS can be found in
`tests/construct_component/nodejs`.
This is the core of #2430.
2020-09-08 02:33:55 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
2024-07-15 09:05:28 +00:00
|
|
|
* {@link UpdateResult} represents the results of a call to
|
|
|
|
* {@link ResourceProvider.update}.
|
Initial support for remote component construction. (#5280)
These changes add initial support for the construction of remote
components. For now, this support is limited to the NodeJS SDK;
follow-up changes will implement support for the other SDKs.
Remote components are component resources that are constructed and
managed by plugins rather than by Pulumi programs. In this sense, they
are a bit like cloud resources, and are supported by the same
distribution and plugin loading mechanisms and described by the same
schema system.
The construction of a remote component is initiated by a
`RegisterResourceRequest` with the new `remote` field set to `true`.
When the resource monitor receives such a request, it loads the plugin
that implements the component resource and calls the `Construct`
method added to the resource provider interface as part of these
changes. This method accepts the information necessary to construct the
component and its children: the component's name, type, resource
options, inputs, and input dependencies. It is responsible for
dispatching to the appropriate component factory to create the
component, then returning its URN, resolved output properties, and
output property dependencies. The dependency information is necessary to
support features such as delete-before-replace, which rely on precise
dependency information for custom resources.
These changes also add initial support for more conveniently
implementing resource providers in NodeJS. The interface used to
implement such a provider is similar to the dynamic provider interface
(and may be unified with that interface in the future).
An example of a NodeJS program constructing a remote component resource
also implemented in NodeJS can be found in
`tests/construct_component/nodejs`.
This is the core of #2430.
2020-09-08 02:33:55 +00:00
|
|
|
*/
|
|
|
|
export interface UpdateResult {
|
|
|
|
/**
|
|
|
|
* Any properties that were computed during updating.
|
|
|
|
*/
|
|
|
|
readonly outs?: any;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
2024-07-15 09:05:28 +00:00
|
|
|
* {@link ConstructResult} represents the results of a call to
|
|
|
|
* {@link ResourceProvider.construct}.
|
Initial support for remote component construction. (#5280)
These changes add initial support for the construction of remote
components. For now, this support is limited to the NodeJS SDK;
follow-up changes will implement support for the other SDKs.
Remote components are component resources that are constructed and
managed by plugins rather than by Pulumi programs. In this sense, they
are a bit like cloud resources, and are supported by the same
distribution and plugin loading mechanisms and described by the same
schema system.
The construction of a remote component is initiated by a
`RegisterResourceRequest` with the new `remote` field set to `true`.
When the resource monitor receives such a request, it loads the plugin
that implements the component resource and calls the `Construct`
method added to the resource provider interface as part of these
changes. This method accepts the information necessary to construct the
component and its children: the component's name, type, resource
options, inputs, and input dependencies. It is responsible for
dispatching to the appropriate component factory to create the
component, then returning its URN, resolved output properties, and
output property dependencies. The dependency information is necessary to
support features such as delete-before-replace, which rely on precise
dependency information for custom resources.
These changes also add initial support for more conveniently
implementing resource providers in NodeJS. The interface used to
implement such a provider is similar to the dynamic provider interface
(and may be unified with that interface in the future).
An example of a NodeJS program constructing a remote component resource
also implemented in NodeJS can be found in
`tests/construct_component/nodejs`.
This is the core of #2430.
2020-09-08 02:33:55 +00:00
|
|
|
*/
|
|
|
|
export interface ConstructResult {
|
|
|
|
/**
|
|
|
|
* The URN of the constructed resource.
|
|
|
|
*/
|
|
|
|
readonly urn: Input<resource.URN>;
|
|
|
|
|
|
|
|
/**
|
|
|
|
* Any state that was computed during construction.
|
|
|
|
*/
|
|
|
|
readonly state: Inputs;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
2024-07-15 09:05:28 +00:00
|
|
|
* {@link InvokeResult} represents the results of a call to
|
|
|
|
* {@link ResourceProvider.invoke}.
|
Initial support for remote component construction. (#5280)
These changes add initial support for the construction of remote
components. For now, this support is limited to the NodeJS SDK;
follow-up changes will implement support for the other SDKs.
Remote components are component resources that are constructed and
managed by plugins rather than by Pulumi programs. In this sense, they
are a bit like cloud resources, and are supported by the same
distribution and plugin loading mechanisms and described by the same
schema system.
The construction of a remote component is initiated by a
`RegisterResourceRequest` with the new `remote` field set to `true`.
When the resource monitor receives such a request, it loads the plugin
that implements the component resource and calls the `Construct`
method added to the resource provider interface as part of these
changes. This method accepts the information necessary to construct the
component and its children: the component's name, type, resource
options, inputs, and input dependencies. It is responsible for
dispatching to the appropriate component factory to create the
component, then returning its URN, resolved output properties, and
output property dependencies. The dependency information is necessary to
support features such as delete-before-replace, which rely on precise
dependency information for custom resources.
These changes also add initial support for more conveniently
implementing resource providers in NodeJS. The interface used to
implement such a provider is similar to the dynamic provider interface
(and may be unified with that interface in the future).
An example of a NodeJS program constructing a remote component resource
also implemented in NodeJS can be found in
`tests/construct_component/nodejs`.
This is the core of #2430.
2020-09-08 02:33:55 +00:00
|
|
|
*/
|
|
|
|
export interface InvokeResult {
|
|
|
|
/**
|
|
|
|
* The outputs returned by the invoked function, if any.
|
|
|
|
*/
|
|
|
|
readonly outputs?: any;
|
|
|
|
|
|
|
|
/**
|
|
|
|
* Any validation failures that occurred.
|
|
|
|
*/
|
|
|
|
readonly failures?: CheckFailure[];
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
2024-07-15 09:05:28 +00:00
|
|
|
* {@link Provider} represents an object that implements the resources and
|
|
|
|
* functions for a particular Pulumi package.
|
Initial support for remote component construction. (#5280)
These changes add initial support for the construction of remote
components. For now, this support is limited to the NodeJS SDK;
follow-up changes will implement support for the other SDKs.
Remote components are component resources that are constructed and
managed by plugins rather than by Pulumi programs. In this sense, they
are a bit like cloud resources, and are supported by the same
distribution and plugin loading mechanisms and described by the same
schema system.
The construction of a remote component is initiated by a
`RegisterResourceRequest` with the new `remote` field set to `true`.
When the resource monitor receives such a request, it loads the plugin
that implements the component resource and calls the `Construct`
method added to the resource provider interface as part of these
changes. This method accepts the information necessary to construct the
component and its children: the component's name, type, resource
options, inputs, and input dependencies. It is responsible for
dispatching to the appropriate component factory to create the
component, then returning its URN, resolved output properties, and
output property dependencies. The dependency information is necessary to
support features such as delete-before-replace, which rely on precise
dependency information for custom resources.
These changes also add initial support for more conveniently
implementing resource providers in NodeJS. The interface used to
implement such a provider is similar to the dynamic provider interface
(and may be unified with that interface in the future).
An example of a NodeJS program constructing a remote component resource
also implemented in NodeJS can be found in
`tests/construct_component/nodejs`.
This is the core of #2430.
2020-09-08 02:33:55 +00:00
|
|
|
*/
|
|
|
|
export interface Provider {
|
|
|
|
/**
|
|
|
|
* The version of the provider. Must be valid semver.
|
|
|
|
*/
|
|
|
|
version: string;
|
|
|
|
|
2021-05-19 14:11:18 +00:00
|
|
|
/**
|
|
|
|
* The JSON-encoded schema for this provider's package.
|
|
|
|
*/
|
|
|
|
schema?: string;
|
|
|
|
|
Initial support for remote component construction. (#5280)
These changes add initial support for the construction of remote
components. For now, this support is limited to the NodeJS SDK;
follow-up changes will implement support for the other SDKs.
Remote components are component resources that are constructed and
managed by plugins rather than by Pulumi programs. In this sense, they
are a bit like cloud resources, and are supported by the same
distribution and plugin loading mechanisms and described by the same
schema system.
The construction of a remote component is initiated by a
`RegisterResourceRequest` with the new `remote` field set to `true`.
When the resource monitor receives such a request, it loads the plugin
that implements the component resource and calls the `Construct`
method added to the resource provider interface as part of these
changes. This method accepts the information necessary to construct the
component and its children: the component's name, type, resource
options, inputs, and input dependencies. It is responsible for
dispatching to the appropriate component factory to create the
component, then returning its URN, resolved output properties, and
output property dependencies. The dependency information is necessary to
support features such as delete-before-replace, which rely on precise
dependency information for custom resources.
These changes also add initial support for more conveniently
implementing resource providers in NodeJS. The interface used to
implement such a provider is similar to the dynamic provider interface
(and may be unified with that interface in the future).
An example of a NodeJS program constructing a remote component resource
also implemented in NodeJS can be found in
`tests/construct_component/nodejs`.
This is the core of #2430.
2020-09-08 02:33:55 +00:00
|
|
|
/**
|
2024-07-15 09:05:28 +00:00
|
|
|
* Validates that the given property bag is valid for a resource of the
|
|
|
|
* given type.
|
Initial support for remote component construction. (#5280)
These changes add initial support for the construction of remote
components. For now, this support is limited to the NodeJS SDK;
follow-up changes will implement support for the other SDKs.
Remote components are component resources that are constructed and
managed by plugins rather than by Pulumi programs. In this sense, they
are a bit like cloud resources, and are supported by the same
distribution and plugin loading mechanisms and described by the same
schema system.
The construction of a remote component is initiated by a
`RegisterResourceRequest` with the new `remote` field set to `true`.
When the resource monitor receives such a request, it loads the plugin
that implements the component resource and calls the `Construct`
method added to the resource provider interface as part of these
changes. This method accepts the information necessary to construct the
component and its children: the component's name, type, resource
options, inputs, and input dependencies. It is responsible for
dispatching to the appropriate component factory to create the
component, then returning its URN, resolved output properties, and
output property dependencies. The dependency information is necessary to
support features such as delete-before-replace, which rely on precise
dependency information for custom resources.
These changes also add initial support for more conveniently
implementing resource providers in NodeJS. The interface used to
implement such a provider is similar to the dynamic provider interface
(and may be unified with that interface in the future).
An example of a NodeJS program constructing a remote component resource
also implemented in NodeJS can be found in
`tests/construct_component/nodejs`.
This is the core of #2430.
2020-09-08 02:33:55 +00:00
|
|
|
*
|
2024-07-15 09:05:28 +00:00
|
|
|
* @param olds
|
|
|
|
* The old input properties to use for validation.
|
|
|
|
* @param news
|
|
|
|
* The new input properties to use for validation.
|
Initial support for remote component construction. (#5280)
These changes add initial support for the construction of remote
components. For now, this support is limited to the NodeJS SDK;
follow-up changes will implement support for the other SDKs.
Remote components are component resources that are constructed and
managed by plugins rather than by Pulumi programs. In this sense, they
are a bit like cloud resources, and are supported by the same
distribution and plugin loading mechanisms and described by the same
schema system.
The construction of a remote component is initiated by a
`RegisterResourceRequest` with the new `remote` field set to `true`.
When the resource monitor receives such a request, it loads the plugin
that implements the component resource and calls the `Construct`
method added to the resource provider interface as part of these
changes. This method accepts the information necessary to construct the
component and its children: the component's name, type, resource
options, inputs, and input dependencies. It is responsible for
dispatching to the appropriate component factory to create the
component, then returning its URN, resolved output properties, and
output property dependencies. The dependency information is necessary to
support features such as delete-before-replace, which rely on precise
dependency information for custom resources.
These changes also add initial support for more conveniently
implementing resource providers in NodeJS. The interface used to
implement such a provider is similar to the dynamic provider interface
(and may be unified with that interface in the future).
An example of a NodeJS program constructing a remote component resource
also implemented in NodeJS can be found in
`tests/construct_component/nodejs`.
This is the core of #2430.
2020-09-08 02:33:55 +00:00
|
|
|
*/
|
2022-01-27 20:34:12 +00:00
|
|
|
check?: (urn: resource.URN, olds: any, news: any) => Promise<CheckResult>;
|
Initial support for remote component construction. (#5280)
These changes add initial support for the construction of remote
components. For now, this support is limited to the NodeJS SDK;
follow-up changes will implement support for the other SDKs.
Remote components are component resources that are constructed and
managed by plugins rather than by Pulumi programs. In this sense, they
are a bit like cloud resources, and are supported by the same
distribution and plugin loading mechanisms and described by the same
schema system.
The construction of a remote component is initiated by a
`RegisterResourceRequest` with the new `remote` field set to `true`.
When the resource monitor receives such a request, it loads the plugin
that implements the component resource and calls the `Construct`
method added to the resource provider interface as part of these
changes. This method accepts the information necessary to construct the
component and its children: the component's name, type, resource
options, inputs, and input dependencies. It is responsible for
dispatching to the appropriate component factory to create the
component, then returning its URN, resolved output properties, and
output property dependencies. The dependency information is necessary to
support features such as delete-before-replace, which rely on precise
dependency information for custom resources.
These changes also add initial support for more conveniently
implementing resource providers in NodeJS. The interface used to
implement such a provider is similar to the dynamic provider interface
(and may be unified with that interface in the future).
An example of a NodeJS program constructing a remote component resource
also implemented in NodeJS can be found in
`tests/construct_component/nodejs`.
This is the core of #2430.
2020-09-08 02:33:55 +00:00
|
|
|
|
|
|
|
/**
|
2024-07-15 09:05:28 +00:00
|
|
|
* Checks what impacts a hypothetical update will have on the resource's properties.
|
Initial support for remote component construction. (#5280)
These changes add initial support for the construction of remote
components. For now, this support is limited to the NodeJS SDK;
follow-up changes will implement support for the other SDKs.
Remote components are component resources that are constructed and
managed by plugins rather than by Pulumi programs. In this sense, they
are a bit like cloud resources, and are supported by the same
distribution and plugin loading mechanisms and described by the same
schema system.
The construction of a remote component is initiated by a
`RegisterResourceRequest` with the new `remote` field set to `true`.
When the resource monitor receives such a request, it loads the plugin
that implements the component resource and calls the `Construct`
method added to the resource provider interface as part of these
changes. This method accepts the information necessary to construct the
component and its children: the component's name, type, resource
options, inputs, and input dependencies. It is responsible for
dispatching to the appropriate component factory to create the
component, then returning its URN, resolved output properties, and
output property dependencies. The dependency information is necessary to
support features such as delete-before-replace, which rely on precise
dependency information for custom resources.
These changes also add initial support for more conveniently
implementing resource providers in NodeJS. The interface used to
implement such a provider is similar to the dynamic provider interface
(and may be unified with that interface in the future).
An example of a NodeJS program constructing a remote component resource
also implemented in NodeJS can be found in
`tests/construct_component/nodejs`.
This is the core of #2430.
2020-09-08 02:33:55 +00:00
|
|
|
*
|
2024-07-15 09:05:28 +00:00
|
|
|
* @param id
|
|
|
|
* The ID of the resource to diff.
|
|
|
|
* @param olds
|
|
|
|
* The old values of properties to diff.
|
|
|
|
* @param news
|
|
|
|
* The new values of properties to diff.
|
Initial support for remote component construction. (#5280)
These changes add initial support for the construction of remote
components. For now, this support is limited to the NodeJS SDK;
follow-up changes will implement support for the other SDKs.
Remote components are component resources that are constructed and
managed by plugins rather than by Pulumi programs. In this sense, they
are a bit like cloud resources, and are supported by the same
distribution and plugin loading mechanisms and described by the same
schema system.
The construction of a remote component is initiated by a
`RegisterResourceRequest` with the new `remote` field set to `true`.
When the resource monitor receives such a request, it loads the plugin
that implements the component resource and calls the `Construct`
method added to the resource provider interface as part of these
changes. This method accepts the information necessary to construct the
component and its children: the component's name, type, resource
options, inputs, and input dependencies. It is responsible for
dispatching to the appropriate component factory to create the
component, then returning its URN, resolved output properties, and
output property dependencies. The dependency information is necessary to
support features such as delete-before-replace, which rely on precise
dependency information for custom resources.
These changes also add initial support for more conveniently
implementing resource providers in NodeJS. The interface used to
implement such a provider is similar to the dynamic provider interface
(and may be unified with that interface in the future).
An example of a NodeJS program constructing a remote component resource
also implemented in NodeJS can be found in
`tests/construct_component/nodejs`.
This is the core of #2430.
2020-09-08 02:33:55 +00:00
|
|
|
*/
|
|
|
|
diff?: (id: resource.ID, urn: resource.URN, olds: any, news: any) => Promise<DiffResult>;
|
|
|
|
|
|
|
|
/**
|
2024-07-15 09:05:28 +00:00
|
|
|
* Allocates a new instance of the provided resource and returns its unique
|
|
|
|
* ID afterwards. If this call fails, the resource must not have been
|
|
|
|
* created (i.e., it is "transactional").
|
Initial support for remote component construction. (#5280)
These changes add initial support for the construction of remote
components. For now, this support is limited to the NodeJS SDK;
follow-up changes will implement support for the other SDKs.
Remote components are component resources that are constructed and
managed by plugins rather than by Pulumi programs. In this sense, they
are a bit like cloud resources, and are supported by the same
distribution and plugin loading mechanisms and described by the same
schema system.
The construction of a remote component is initiated by a
`RegisterResourceRequest` with the new `remote` field set to `true`.
When the resource monitor receives such a request, it loads the plugin
that implements the component resource and calls the `Construct`
method added to the resource provider interface as part of these
changes. This method accepts the information necessary to construct the
component and its children: the component's name, type, resource
options, inputs, and input dependencies. It is responsible for
dispatching to the appropriate component factory to create the
component, then returning its URN, resolved output properties, and
output property dependencies. The dependency information is necessary to
support features such as delete-before-replace, which rely on precise
dependency information for custom resources.
These changes also add initial support for more conveniently
implementing resource providers in NodeJS. The interface used to
implement such a provider is similar to the dynamic provider interface
(and may be unified with that interface in the future).
An example of a NodeJS program constructing a remote component resource
also implemented in NodeJS can be found in
`tests/construct_component/nodejs`.
This is the core of #2430.
2020-09-08 02:33:55 +00:00
|
|
|
*
|
2024-07-15 09:05:28 +00:00
|
|
|
* @param inputs
|
|
|
|
* The properties to set during creation.
|
Initial support for remote component construction. (#5280)
These changes add initial support for the construction of remote
components. For now, this support is limited to the NodeJS SDK;
follow-up changes will implement support for the other SDKs.
Remote components are component resources that are constructed and
managed by plugins rather than by Pulumi programs. In this sense, they
are a bit like cloud resources, and are supported by the same
distribution and plugin loading mechanisms and described by the same
schema system.
The construction of a remote component is initiated by a
`RegisterResourceRequest` with the new `remote` field set to `true`.
When the resource monitor receives such a request, it loads the plugin
that implements the component resource and calls the `Construct`
method added to the resource provider interface as part of these
changes. This method accepts the information necessary to construct the
component and its children: the component's name, type, resource
options, inputs, and input dependencies. It is responsible for
dispatching to the appropriate component factory to create the
component, then returning its URN, resolved output properties, and
output property dependencies. The dependency information is necessary to
support features such as delete-before-replace, which rely on precise
dependency information for custom resources.
These changes also add initial support for more conveniently
implementing resource providers in NodeJS. The interface used to
implement such a provider is similar to the dynamic provider interface
(and may be unified with that interface in the future).
An example of a NodeJS program constructing a remote component resource
also implemented in NodeJS can be found in
`tests/construct_component/nodejs`.
This is the core of #2430.
2020-09-08 02:33:55 +00:00
|
|
|
*/
|
|
|
|
create?: (urn: resource.URN, inputs: any) => Promise<CreateResult>;
|
|
|
|
|
|
|
|
/**
|
2024-07-15 09:05:28 +00:00
|
|
|
* Reads the current live state associated with a resource. Enough state
|
|
|
|
* must be included in the inputs to uniquely identify the resource; this is
|
|
|
|
* typically just the resource ID, but it may also include some properties.
|
Initial support for remote component construction. (#5280)
These changes add initial support for the construction of remote
components. For now, this support is limited to the NodeJS SDK;
follow-up changes will implement support for the other SDKs.
Remote components are component resources that are constructed and
managed by plugins rather than by Pulumi programs. In this sense, they
are a bit like cloud resources, and are supported by the same
distribution and plugin loading mechanisms and described by the same
schema system.
The construction of a remote component is initiated by a
`RegisterResourceRequest` with the new `remote` field set to `true`.
When the resource monitor receives such a request, it loads the plugin
that implements the component resource and calls the `Construct`
method added to the resource provider interface as part of these
changes. This method accepts the information necessary to construct the
component and its children: the component's name, type, resource
options, inputs, and input dependencies. It is responsible for
dispatching to the appropriate component factory to create the
component, then returning its URN, resolved output properties, and
output property dependencies. The dependency information is necessary to
support features such as delete-before-replace, which rely on precise
dependency information for custom resources.
These changes also add initial support for more conveniently
implementing resource providers in NodeJS. The interface used to
implement such a provider is similar to the dynamic provider interface
(and may be unified with that interface in the future).
An example of a NodeJS program constructing a remote component resource
also implemented in NodeJS can be found in
`tests/construct_component/nodejs`.
This is the core of #2430.
2020-09-08 02:33:55 +00:00
|
|
|
*/
|
|
|
|
read?: (id: resource.ID, urn: resource.URN, props?: any) => Promise<ReadResult>;
|
|
|
|
|
|
|
|
/**
|
|
|
|
* Update updates an existing resource with new values.
|
|
|
|
*
|
2024-07-15 09:05:28 +00:00
|
|
|
* @param id
|
|
|
|
* The ID of the resource to update.
|
|
|
|
* @param olds
|
|
|
|
* The old values of properties to update.
|
|
|
|
* @param news
|
|
|
|
* The new values of properties to update.
|
Initial support for remote component construction. (#5280)
These changes add initial support for the construction of remote
components. For now, this support is limited to the NodeJS SDK;
follow-up changes will implement support for the other SDKs.
Remote components are component resources that are constructed and
managed by plugins rather than by Pulumi programs. In this sense, they
are a bit like cloud resources, and are supported by the same
distribution and plugin loading mechanisms and described by the same
schema system.
The construction of a remote component is initiated by a
`RegisterResourceRequest` with the new `remote` field set to `true`.
When the resource monitor receives such a request, it loads the plugin
that implements the component resource and calls the `Construct`
method added to the resource provider interface as part of these
changes. This method accepts the information necessary to construct the
component and its children: the component's name, type, resource
options, inputs, and input dependencies. It is responsible for
dispatching to the appropriate component factory to create the
component, then returning its URN, resolved output properties, and
output property dependencies. The dependency information is necessary to
support features such as delete-before-replace, which rely on precise
dependency information for custom resources.
These changes also add initial support for more conveniently
implementing resource providers in NodeJS. The interface used to
implement such a provider is similar to the dynamic provider interface
(and may be unified with that interface in the future).
An example of a NodeJS program constructing a remote component resource
also implemented in NodeJS can be found in
`tests/construct_component/nodejs`.
This is the core of #2430.
2020-09-08 02:33:55 +00:00
|
|
|
*/
|
|
|
|
update?: (id: resource.ID, urn: resource.URN, olds: any, news: any) => Promise<UpdateResult>;
|
|
|
|
|
|
|
|
/**
|
2024-07-15 09:05:28 +00:00
|
|
|
* Tears down an existing resource with the given ID. If it fails, the
|
|
|
|
* resource is assumed to still exist.
|
Initial support for remote component construction. (#5280)
These changes add initial support for the construction of remote
components. For now, this support is limited to the NodeJS SDK;
follow-up changes will implement support for the other SDKs.
Remote components are component resources that are constructed and
managed by plugins rather than by Pulumi programs. In this sense, they
are a bit like cloud resources, and are supported by the same
distribution and plugin loading mechanisms and described by the same
schema system.
The construction of a remote component is initiated by a
`RegisterResourceRequest` with the new `remote` field set to `true`.
When the resource monitor receives such a request, it loads the plugin
that implements the component resource and calls the `Construct`
method added to the resource provider interface as part of these
changes. This method accepts the information necessary to construct the
component and its children: the component's name, type, resource
options, inputs, and input dependencies. It is responsible for
dispatching to the appropriate component factory to create the
component, then returning its URN, resolved output properties, and
output property dependencies. The dependency information is necessary to
support features such as delete-before-replace, which rely on precise
dependency information for custom resources.
These changes also add initial support for more conveniently
implementing resource providers in NodeJS. The interface used to
implement such a provider is similar to the dynamic provider interface
(and may be unified with that interface in the future).
An example of a NodeJS program constructing a remote component resource
also implemented in NodeJS can be found in
`tests/construct_component/nodejs`.
This is the core of #2430.
2020-09-08 02:33:55 +00:00
|
|
|
*
|
2024-07-15 09:05:28 +00:00
|
|
|
* @param id
|
|
|
|
* The ID of the resource to delete.
|
|
|
|
* @param props
|
|
|
|
* The current properties on the resource.
|
Initial support for remote component construction. (#5280)
These changes add initial support for the construction of remote
components. For now, this support is limited to the NodeJS SDK;
follow-up changes will implement support for the other SDKs.
Remote components are component resources that are constructed and
managed by plugins rather than by Pulumi programs. In this sense, they
are a bit like cloud resources, and are supported by the same
distribution and plugin loading mechanisms and described by the same
schema system.
The construction of a remote component is initiated by a
`RegisterResourceRequest` with the new `remote` field set to `true`.
When the resource monitor receives such a request, it loads the plugin
that implements the component resource and calls the `Construct`
method added to the resource provider interface as part of these
changes. This method accepts the information necessary to construct the
component and its children: the component's name, type, resource
options, inputs, and input dependencies. It is responsible for
dispatching to the appropriate component factory to create the
component, then returning its URN, resolved output properties, and
output property dependencies. The dependency information is necessary to
support features such as delete-before-replace, which rely on precise
dependency information for custom resources.
These changes also add initial support for more conveniently
implementing resource providers in NodeJS. The interface used to
implement such a provider is similar to the dynamic provider interface
(and may be unified with that interface in the future).
An example of a NodeJS program constructing a remote component resource
also implemented in NodeJS can be found in
`tests/construct_component/nodejs`.
This is the core of #2430.
2020-09-08 02:33:55 +00:00
|
|
|
*/
|
|
|
|
delete?: (id: resource.ID, urn: resource.URN, props: any) => Promise<void>;
|
|
|
|
|
|
|
|
/**
|
2024-07-15 09:05:28 +00:00
|
|
|
* Creates a new component resource.
|
Initial support for remote component construction. (#5280)
These changes add initial support for the construction of remote
components. For now, this support is limited to the NodeJS SDK;
follow-up changes will implement support for the other SDKs.
Remote components are component resources that are constructed and
managed by plugins rather than by Pulumi programs. In this sense, they
are a bit like cloud resources, and are supported by the same
distribution and plugin loading mechanisms and described by the same
schema system.
The construction of a remote component is initiated by a
`RegisterResourceRequest` with the new `remote` field set to `true`.
When the resource monitor receives such a request, it loads the plugin
that implements the component resource and calls the `Construct`
method added to the resource provider interface as part of these
changes. This method accepts the information necessary to construct the
component and its children: the component's name, type, resource
options, inputs, and input dependencies. It is responsible for
dispatching to the appropriate component factory to create the
component, then returning its URN, resolved output properties, and
output property dependencies. The dependency information is necessary to
support features such as delete-before-replace, which rely on precise
dependency information for custom resources.
These changes also add initial support for more conveniently
implementing resource providers in NodeJS. The interface used to
implement such a provider is similar to the dynamic provider interface
(and may be unified with that interface in the future).
An example of a NodeJS program constructing a remote component resource
also implemented in NodeJS can be found in
`tests/construct_component/nodejs`.
This is the core of #2430.
2020-09-08 02:33:55 +00:00
|
|
|
*
|
2024-07-15 09:05:28 +00:00
|
|
|
* @param name
|
|
|
|
* The name of the resource to create.
|
|
|
|
* @param type
|
|
|
|
* The type of the resource to create.
|
|
|
|
* @param inputs
|
|
|
|
* The inputs to the resource.
|
|
|
|
* @param options
|
|
|
|
* The options for the resource.
|
Initial support for remote component construction. (#5280)
These changes add initial support for the construction of remote
components. For now, this support is limited to the NodeJS SDK;
follow-up changes will implement support for the other SDKs.
Remote components are component resources that are constructed and
managed by plugins rather than by Pulumi programs. In this sense, they
are a bit like cloud resources, and are supported by the same
distribution and plugin loading mechanisms and described by the same
schema system.
The construction of a remote component is initiated by a
`RegisterResourceRequest` with the new `remote` field set to `true`.
When the resource monitor receives such a request, it loads the plugin
that implements the component resource and calls the `Construct`
method added to the resource provider interface as part of these
changes. This method accepts the information necessary to construct the
component and its children: the component's name, type, resource
options, inputs, and input dependencies. It is responsible for
dispatching to the appropriate component factory to create the
component, then returning its URN, resolved output properties, and
output property dependencies. The dependency information is necessary to
support features such as delete-before-replace, which rely on precise
dependency information for custom resources.
These changes also add initial support for more conveniently
implementing resource providers in NodeJS. The interface used to
implement such a provider is similar to the dynamic provider interface
(and may be unified with that interface in the future).
An example of a NodeJS program constructing a remote component resource
also implemented in NodeJS can be found in
`tests/construct_component/nodejs`.
This is the core of #2430.
2020-09-08 02:33:55 +00:00
|
|
|
*/
|
2023-04-28 22:27:10 +00:00
|
|
|
construct?: (
|
|
|
|
name: string,
|
|
|
|
type: string,
|
|
|
|
inputs: Inputs,
|
|
|
|
options: resource.ComponentResourceOptions,
|
|
|
|
) => Promise<ConstructResult>;
|
Initial support for remote component construction. (#5280)
These changes add initial support for the construction of remote
components. For now, this support is limited to the NodeJS SDK;
follow-up changes will implement support for the other SDKs.
Remote components are component resources that are constructed and
managed by plugins rather than by Pulumi programs. In this sense, they
are a bit like cloud resources, and are supported by the same
distribution and plugin loading mechanisms and described by the same
schema system.
The construction of a remote component is initiated by a
`RegisterResourceRequest` with the new `remote` field set to `true`.
When the resource monitor receives such a request, it loads the plugin
that implements the component resource and calls the `Construct`
method added to the resource provider interface as part of these
changes. This method accepts the information necessary to construct the
component and its children: the component's name, type, resource
options, inputs, and input dependencies. It is responsible for
dispatching to the appropriate component factory to create the
component, then returning its URN, resolved output properties, and
output property dependencies. The dependency information is necessary to
support features such as delete-before-replace, which rely on precise
dependency information for custom resources.
These changes also add initial support for more conveniently
implementing resource providers in NodeJS. The interface used to
implement such a provider is similar to the dynamic provider interface
(and may be unified with that interface in the future).
An example of a NodeJS program constructing a remote component resource
also implemented in NodeJS can be found in
`tests/construct_component/nodejs`.
This is the core of #2430.
2020-09-08 02:33:55 +00:00
|
|
|
|
2021-06-30 14:48:56 +00:00
|
|
|
/**
|
2024-07-15 09:05:28 +00:00
|
|
|
* Calls the indicated method.
|
2021-06-30 14:48:56 +00:00
|
|
|
*
|
2024-07-15 09:05:28 +00:00
|
|
|
* @param token
|
|
|
|
* The token of the method to call.
|
|
|
|
* @param inputs
|
|
|
|
* The inputs to the method.
|
2021-06-30 14:48:56 +00:00
|
|
|
*/
|
|
|
|
call?: (token: string, inputs: Inputs) => Promise<InvokeResult>;
|
|
|
|
|
Initial support for remote component construction. (#5280)
These changes add initial support for the construction of remote
components. For now, this support is limited to the NodeJS SDK;
follow-up changes will implement support for the other SDKs.
Remote components are component resources that are constructed and
managed by plugins rather than by Pulumi programs. In this sense, they
are a bit like cloud resources, and are supported by the same
distribution and plugin loading mechanisms and described by the same
schema system.
The construction of a remote component is initiated by a
`RegisterResourceRequest` with the new `remote` field set to `true`.
When the resource monitor receives such a request, it loads the plugin
that implements the component resource and calls the `Construct`
method added to the resource provider interface as part of these
changes. This method accepts the information necessary to construct the
component and its children: the component's name, type, resource
options, inputs, and input dependencies. It is responsible for
dispatching to the appropriate component factory to create the
component, then returning its URN, resolved output properties, and
output property dependencies. The dependency information is necessary to
support features such as delete-before-replace, which rely on precise
dependency information for custom resources.
These changes also add initial support for more conveniently
implementing resource providers in NodeJS. The interface used to
implement such a provider is similar to the dynamic provider interface
(and may be unified with that interface in the future).
An example of a NodeJS program constructing a remote component resource
also implemented in NodeJS can be found in
`tests/construct_component/nodejs`.
This is the core of #2430.
2020-09-08 02:33:55 +00:00
|
|
|
/**
|
2024-07-15 09:05:28 +00:00
|
|
|
* Calls the indicated function.
|
Initial support for remote component construction. (#5280)
These changes add initial support for the construction of remote
components. For now, this support is limited to the NodeJS SDK;
follow-up changes will implement support for the other SDKs.
Remote components are component resources that are constructed and
managed by plugins rather than by Pulumi programs. In this sense, they
are a bit like cloud resources, and are supported by the same
distribution and plugin loading mechanisms and described by the same
schema system.
The construction of a remote component is initiated by a
`RegisterResourceRequest` with the new `remote` field set to `true`.
When the resource monitor receives such a request, it loads the plugin
that implements the component resource and calls the `Construct`
method added to the resource provider interface as part of these
changes. This method accepts the information necessary to construct the
component and its children: the component's name, type, resource
options, inputs, and input dependencies. It is responsible for
dispatching to the appropriate component factory to create the
component, then returning its URN, resolved output properties, and
output property dependencies. The dependency information is necessary to
support features such as delete-before-replace, which rely on precise
dependency information for custom resources.
These changes also add initial support for more conveniently
implementing resource providers in NodeJS. The interface used to
implement such a provider is similar to the dynamic provider interface
(and may be unified with that interface in the future).
An example of a NodeJS program constructing a remote component resource
also implemented in NodeJS can be found in
`tests/construct_component/nodejs`.
This is the core of #2430.
2020-09-08 02:33:55 +00:00
|
|
|
*
|
2024-07-15 09:05:28 +00:00
|
|
|
* @param token
|
|
|
|
* The token of the function to call.
|
|
|
|
* @param inputs
|
|
|
|
* The inputs to the function.
|
Initial support for remote component construction. (#5280)
These changes add initial support for the construction of remote
components. For now, this support is limited to the NodeJS SDK;
follow-up changes will implement support for the other SDKs.
Remote components are component resources that are constructed and
managed by plugins rather than by Pulumi programs. In this sense, they
are a bit like cloud resources, and are supported by the same
distribution and plugin loading mechanisms and described by the same
schema system.
The construction of a remote component is initiated by a
`RegisterResourceRequest` with the new `remote` field set to `true`.
When the resource monitor receives such a request, it loads the plugin
that implements the component resource and calls the `Construct`
method added to the resource provider interface as part of these
changes. This method accepts the information necessary to construct the
component and its children: the component's name, type, resource
options, inputs, and input dependencies. It is responsible for
dispatching to the appropriate component factory to create the
component, then returning its URN, resolved output properties, and
output property dependencies. The dependency information is necessary to
support features such as delete-before-replace, which rely on precise
dependency information for custom resources.
These changes also add initial support for more conveniently
implementing resource providers in NodeJS. The interface used to
implement such a provider is similar to the dynamic provider interface
(and may be unified with that interface in the future).
An example of a NodeJS program constructing a remote component resource
also implemented in NodeJS can be found in
`tests/construct_component/nodejs`.
This is the core of #2430.
2020-09-08 02:33:55 +00:00
|
|
|
*/
|
|
|
|
invoke?: (token: string, inputs: any) => Promise<InvokeResult>;
|
|
|
|
}
|