pulumi/pkg/resource/deploy/providers/registry.go

766 lines
29 KiB
Go
Raw Permalink Normal View History

// Copyright 2016-2021, Pulumi Corporation.
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package providers
import (
"context"
"encoding/base64"
Pass provider checksums in requests and save to state (#13789) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> This extends the resource monitor interface with fields for plugin checksums (on top of the existing plugin version and download url fields). These fields are threaded through the engine and are persisted in resource state. The sent or saved data is then used when installing plugins to ensure that the checksums match what was recorded at the time the SDK was built. Similar to https://github.com/pulumi/pulumi/pull/13776 nothing is using this yet, but this lays the engine side plumbing for them. ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [x] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-09-11 15:54:07 +00:00
"encoding/hex"
"errors"
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
"fmt"
"sync"
"github.com/blang/semver"
uuid "github.com/gofrs/uuid"
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
pkgWorkspace "github.com/pulumi/pulumi/pkg/v3/workspace"
"github.com/pulumi/pulumi/sdk/v3/go/common/apitype"
"github.com/pulumi/pulumi/sdk/v3/go/common/diag"
Add an envar to disable automatic provider installation (#14083) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> This is primarily for the providers team to enable during builds so they can have more confidence about reproducibility of builds (especially examples conversion), but I imagine some customers would enable this as well. Fixes #14086 ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [x] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-10-03 15:35:23 +00:00
"github.com/pulumi/pulumi/sdk/v3/go/common/env"
"github.com/pulumi/pulumi/sdk/v3/go/common/resource"
"github.com/pulumi/pulumi/sdk/v3/go/common/resource/plugin"
"github.com/pulumi/pulumi/sdk/v3/go/common/tokens"
"github.com/pulumi/pulumi/sdk/v3/go/common/util/contract"
"github.com/pulumi/pulumi/sdk/v3/go/common/util/logging"
"github.com/pulumi/pulumi/sdk/v3/go/common/workspace"
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
)
all: Reformat with gofumpt Per team discussion, switching to gofumpt. [gofumpt][1] is an alternative, stricter alternative to gofmt. It addresses other stylistic concerns that gofmt doesn't yet cover. [1]: https://github.com/mvdan/gofumpt See the full list of [Added rules][2], but it includes: - Dropping empty lines around function bodies - Dropping unnecessary variable grouping when there's only one variable - Ensuring an empty line between multi-line functions - simplification (`-s` in gofmt) is always enabled - Ensuring multi-line function signatures end with `) {` on a separate line. [2]: https://github.com/mvdan/gofumpt#Added-rules gofumpt is stricter, but there's no lock-in. All gofumpt output is valid gofmt output, so if we decide we don't like it, it's easy to switch back without any code changes. gofumpt support is built into the tooling we use for development so this won't change development workflows. - golangci-lint includes a gofumpt check (enabled in this PR) - gopls, the LSP for Go, includes a gofumpt option (see [installation instrutions][3]) [3]: https://github.com/mvdan/gofumpt#installation This change was generated by running: ```bash gofumpt -w $(rg --files -g '*.go' | rg -v testdata | rg -v compilation_error) ``` The following files were manually tweaked afterwards: - pkg/cmd/pulumi/stack_change_secrets_provider.go: one of the lines overflowed and had comments in an inconvenient place - pkg/cmd/pulumi/destroy.go: `var x T = y` where `T` wasn't necessary - pkg/cmd/pulumi/policy_new.go: long line because of error message - pkg/backend/snapshot_test.go: long line trying to assign three variables in the same assignment I have included mention of gofumpt in the CONTRIBUTING.md.
2023-03-03 16:36:39 +00:00
const (
parameterizationKey resource.PropertyKey = "parameterization"
nameKey resource.PropertyKey = "name"
versionKey resource.PropertyKey = "version"
pluginDownloadKey resource.PropertyKey = "pluginDownloadURL"
pluginChecksumsKey resource.PropertyKey = "pluginChecksums"
all: Reformat with gofumpt Per team discussion, switching to gofumpt. [gofumpt][1] is an alternative, stricter alternative to gofmt. It addresses other stylistic concerns that gofmt doesn't yet cover. [1]: https://github.com/mvdan/gofumpt See the full list of [Added rules][2], but it includes: - Dropping empty lines around function bodies - Dropping unnecessary variable grouping when there's only one variable - Ensuring an empty line between multi-line functions - simplification (`-s` in gofmt) is always enabled - Ensuring multi-line function signatures end with `) {` on a separate line. [2]: https://github.com/mvdan/gofumpt#Added-rules gofumpt is stricter, but there's no lock-in. All gofumpt output is valid gofmt output, so if we decide we don't like it, it's easy to switch back without any code changes. gofumpt support is built into the tooling we use for development so this won't change development workflows. - golangci-lint includes a gofumpt check (enabled in this PR) - gopls, the LSP for Go, includes a gofumpt option (see [installation instrutions][3]) [3]: https://github.com/mvdan/gofumpt#installation This change was generated by running: ```bash gofumpt -w $(rg --files -g '*.go' | rg -v testdata | rg -v compilation_error) ``` The following files were manually tweaked afterwards: - pkg/cmd/pulumi/stack_change_secrets_provider.go: one of the lines overflowed and had comments in an inconvenient place - pkg/cmd/pulumi/destroy.go: `var x T = y` where `T` wasn't necessary - pkg/cmd/pulumi/policy_new.go: long line because of error message - pkg/backend/snapshot_test.go: long line trying to assign three variables in the same assignment I have included mention of gofumpt in the CONTRIBUTING.md.
2023-03-03 16:36:39 +00:00
)
Pass provider checksums in requests and save to state (#13789) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> This extends the resource monitor interface with fields for plugin checksums (on top of the existing plugin version and download url fields). These fields are threaded through the engine and are persisted in resource state. The sent or saved data is then used when installing plugins to ensure that the checksums match what was recorded at the time the SDK was built. Similar to https://github.com/pulumi/pulumi/pull/13776 nothing is using this yet, but this lays the engine side plumbing for them. ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [x] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-09-11 15:54:07 +00:00
// SetProviderChecksums sets the provider plugin checksums in the given property map.
func SetProviderChecksums(inputs resource.PropertyMap, value map[string][]byte) {
propMap := make(resource.PropertyMap)
for key, checksum := range value {
hex := hex.EncodeToString(checksum)
propMap[resource.PropertyKey(key)] = resource.NewStringProperty(hex)
}
inputs[pluginChecksumsKey] = resource.NewObjectProperty(propMap)
}
// GetProviderChecksums fetches a provider plugin checksums from the given property map.
// If the checksums is not set, this function returns nil.
func GetProviderChecksums(inputs resource.PropertyMap) (map[string][]byte, error) {
checksums, ok := inputs[pluginChecksumsKey]
if !ok {
return nil, nil
}
if !checksums.IsObject() {
return nil, fmt.Errorf("'%s' must be an object", pluginChecksumsKey)
}
result := make(map[string][]byte)
for key, value := range checksums.ObjectValue() {
if !value.IsString() {
return nil, fmt.Errorf("'%s[%s]' must be a string", pluginChecksumsKey, key)
}
bytes, err := hex.DecodeString(value.StringValue())
if err != nil {
return nil, fmt.Errorf("'%s[%s]' must be a hexadecimal string", pluginChecksumsKey, key)
}
result[string(key)] = bytes
}
return result, nil
}
// SetProviderURL sets the provider plugin download server URL in the given property map.
func SetProviderURL(inputs resource.PropertyMap, value string) {
inputs[pluginDownloadKey] = resource.NewStringProperty(value)
}
// GetProviderDownloadURL fetches a provider plugin download server URL from the given property map.
// If the server URL is not set, this function returns "".
func GetProviderDownloadURL(inputs resource.PropertyMap) (string, error) {
url, ok := inputs[pluginDownloadKey]
if !ok {
return "", nil
}
if !url.IsString() {
return "", fmt.Errorf("'%s' must be a string", pluginDownloadKey)
}
return url.StringValue(), nil
}
// Sets the provider version in the given property map.
func SetProviderVersion(inputs resource.PropertyMap, value *semver.Version) {
inputs[versionKey] = resource.NewStringProperty(value.String())
}
// GetProviderVersion fetches and parses a provider version from the given property map. If the
// version property is not present, this function returns nil.
func GetProviderVersion(inputs resource.PropertyMap) (*semver.Version, error) {
version, ok := inputs[versionKey]
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
if !ok {
return nil, nil
}
if !version.IsString() {
return nil, fmt.Errorf("'%s' must be a string", versionKey)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
}
sv, err := semver.ParseTolerant(version.StringValue())
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
if err != nil {
return nil, fmt.Errorf("could not parse provider version: %w", err)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
}
return &sv, nil
}
// Sets the provider name in the given property map.
func SetProviderName(inputs resource.PropertyMap, name tokens.Package) {
inputs[nameKey] = resource.NewStringProperty(name.String())
}
// GetProviderName fetches and parses a provider name from the given property map. If the
// name property is not present, this function returns the passed in name.
func GetProviderName(name tokens.Package, inputs resource.PropertyMap) (tokens.Package, error) {
nameProperty, ok := inputs[nameKey]
if !ok {
return name, nil
}
if !nameProperty.IsString() {
return "", fmt.Errorf("'%s' must be a string", nameKey)
}
nameString := nameProperty.StringValue()
if nameString == "" {
return "", fmt.Errorf("'%s' must not be empty", nameKey)
}
return tokens.Package(nameString), nil
}
// Sets the provider parameterization in the given property map.
func SetProviderParameterization(inputs resource.PropertyMap, value *ProviderParameterization) {
inputs[parameterizationKey] = resource.NewObjectProperty(resource.PropertyMap{
// We don't write name here because we can reconstruct that from the providers type token
Initial work for parameterized providers (#16281) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> This is the first part of paramaterized providers in the engine. This only supports "replacement" packages, that is where we fully replace a providers package with a new package (think how dynamic tfbridge will work, vs how crd2pulumi will work). I've made the decision to _not_ support using parameterised providers by sending the parameter in the RegisterResource request. This will necessitate some different work in how we send the parameter for explicit providers compared to version and pluginDownloadURL, but I think it's worth it going forward. No changelog as this is still basically unusable without codegen support done, and should still be considered primarily for internal experimental use for now. ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-10 17:28:47 +00:00
"version": resource.NewStringProperty(value.version.String()),
"value": resource.NewStringProperty(
base64.StdEncoding.EncodeToString(value.value)),
Initial work for parameterized providers (#16281) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> This is the first part of paramaterized providers in the engine. This only supports "replacement" packages, that is where we fully replace a providers package with a new package (think how dynamic tfbridge will work, vs how crd2pulumi will work). I've made the decision to _not_ support using parameterised providers by sending the parameter in the RegisterResource request. This will necessitate some different work in how we send the parameter for explicit providers compared to version and pluginDownloadURL, but I think it's worth it going forward. No changelog as this is still basically unusable without codegen support done, and should still be considered primarily for internal experimental use for now. ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-10 17:28:47 +00:00
})
}
// GetProviderParameterization fetches and parses a provider parameterization from the given property map. If the
// parameterization property is not present, this function returns nil.
func GetProviderParameterization(name tokens.Package, inputs resource.PropertyMap) (*ProviderParameterization, error) {
parameter, ok := inputs[parameterizationKey]
Initial work for parameterized providers (#16281) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> This is the first part of paramaterized providers in the engine. This only supports "replacement" packages, that is where we fully replace a providers package with a new package (think how dynamic tfbridge will work, vs how crd2pulumi will work). I've made the decision to _not_ support using parameterised providers by sending the parameter in the RegisterResource request. This will necessitate some different work in how we send the parameter for explicit providers compared to version and pluginDownloadURL, but I think it's worth it going forward. No changelog as this is still basically unusable without codegen support done, and should still be considered primarily for internal experimental use for now. ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-10 17:28:47 +00:00
if !ok {
return nil, nil
}
if !parameter.IsObject() {
return nil, fmt.Errorf("'%s' must be an object", parameterizationKey)
Initial work for parameterized providers (#16281) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> This is the first part of paramaterized providers in the engine. This only supports "replacement" packages, that is where we fully replace a providers package with a new package (think how dynamic tfbridge will work, vs how crd2pulumi will work). I've made the decision to _not_ support using parameterised providers by sending the parameter in the RegisterResource request. This will necessitate some different work in how we send the parameter for explicit providers compared to version and pluginDownloadURL, but I think it's worth it going forward. No changelog as this is still basically unusable without codegen support done, and should still be considered primarily for internal experimental use for now. ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-10 17:28:47 +00:00
}
obj := parameter.ObjectValue()
version, ok := obj["version"]
if !ok {
return nil, fmt.Errorf("'%s' must have a 'version' field", parameterizationKey)
Initial work for parameterized providers (#16281) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> This is the first part of paramaterized providers in the engine. This only supports "replacement" packages, that is where we fully replace a providers package with a new package (think how dynamic tfbridge will work, vs how crd2pulumi will work). I've made the decision to _not_ support using parameterised providers by sending the parameter in the RegisterResource request. This will necessitate some different work in how we send the parameter for explicit providers compared to version and pluginDownloadURL, but I think it's worth it going forward. No changelog as this is still basically unusable without codegen support done, and should still be considered primarily for internal experimental use for now. ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-10 17:28:47 +00:00
}
if !version.IsString() {
return nil, fmt.Errorf("'%s' must have a 'version' field of type string", parameterizationKey)
Initial work for parameterized providers (#16281) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> This is the first part of paramaterized providers in the engine. This only supports "replacement" packages, that is where we fully replace a providers package with a new package (think how dynamic tfbridge will work, vs how crd2pulumi will work). I've made the decision to _not_ support using parameterised providers by sending the parameter in the RegisterResource request. This will necessitate some different work in how we send the parameter for explicit providers compared to version and pluginDownloadURL, but I think it's worth it going forward. No changelog as this is still basically unusable without codegen support done, and should still be considered primarily for internal experimental use for now. ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-10 17:28:47 +00:00
}
sv, err := semver.Parse(version.StringValue())
if err != nil {
return nil, fmt.Errorf("could not parse provider version: %w", err)
}
value, ok := obj["value"]
if !ok {
return nil, fmt.Errorf("'%s' must have a 'value' field", parameterizationKey)
Initial work for parameterized providers (#16281) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> This is the first part of paramaterized providers in the engine. This only supports "replacement" packages, that is where we fully replace a providers package with a new package (think how dynamic tfbridge will work, vs how crd2pulumi will work). I've made the decision to _not_ support using parameterised providers by sending the parameter in the RegisterResource request. This will necessitate some different work in how we send the parameter for explicit providers compared to version and pluginDownloadURL, but I think it's worth it going forward. No changelog as this is still basically unusable without codegen support done, and should still be considered primarily for internal experimental use for now. ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-10 17:28:47 +00:00
}
if !value.IsString() {
return nil, fmt.Errorf("'%s' must have a 'value' field of type string", parameterizationKey)
}
bytes, err := base64.StdEncoding.DecodeString(value.StringValue())
if err != nil {
return nil, fmt.Errorf("could not decode base64 parameter value: %w", err)
}
Initial work for parameterized providers (#16281) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> This is the first part of paramaterized providers in the engine. This only supports "replacement" packages, that is where we fully replace a providers package with a new package (think how dynamic tfbridge will work, vs how crd2pulumi will work). I've made the decision to _not_ support using parameterised providers by sending the parameter in the RegisterResource request. This will necessitate some different work in how we send the parameter for explicit providers compared to version and pluginDownloadURL, but I think it's worth it going forward. No changelog as this is still basically unusable without codegen support done, and should still be considered primarily for internal experimental use for now. ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-10 17:28:47 +00:00
return &ProviderParameterization{
name: name,
Initial work for parameterized providers (#16281) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> This is the first part of paramaterized providers in the engine. This only supports "replacement" packages, that is where we fully replace a providers package with a new package (think how dynamic tfbridge will work, vs how crd2pulumi will work). I've made the decision to _not_ support using parameterised providers by sending the parameter in the RegisterResource request. This will necessitate some different work in how we send the parameter for explicit providers compared to version and pluginDownloadURL, but I think it's worth it going forward. No changelog as this is still basically unusable without codegen support done, and should still be considered primarily for internal experimental use for now. ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-10 17:28:47 +00:00
version: &sv,
value: bytes,
Initial work for parameterized providers (#16281) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> This is the first part of paramaterized providers in the engine. This only supports "replacement" packages, that is where we fully replace a providers package with a new package (think how dynamic tfbridge will work, vs how crd2pulumi will work). I've made the decision to _not_ support using parameterised providers by sending the parameter in the RegisterResource request. This will necessitate some different work in how we send the parameter for explicit providers compared to version and pluginDownloadURL, but I think it's worth it going forward. No changelog as this is still basically unusable without codegen support done, and should still be considered primarily for internal experimental use for now. ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-10 17:28:47 +00:00
}, nil
}
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
// Registry manages the lifecylce of provider resources and their plugins and handles the resolution of provider
// references to loaded plugins.
//
// When a registry is created, it is handed the set of old provider resources that it will manage. Each provider
// resource in this set is loaded and configured as per its recorded inputs and registered under the provider
// reference that corresponds to its URN and ID, both of which must be known. At this point, the created registry is
// prepared to be used to manage the lifecycle of these providers as well as any new provider resources requested by
// invoking the registry's CRUD operations.
//
// In order to fit neatly in to the existing infrastructure for managing resources using Pulumi, a provider regidstry
// itself implements the plugin.Provider interface.
type Registry struct {
plugin.NotForwardCompatibleProvider
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
host plugin.Host
isPreview bool
providers map[Reference]plugin.Provider
builtins plugin.Provider
2021-07-28 19:12:53 +00:00
aliases map[resource.URN]resource.URN
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
m sync.RWMutex
}
var _ plugin.Provider = (*Registry)(nil)
func loadProvider(pkg tokens.Package, version *semver.Version, downloadURL string, checksums map[string][]byte,
host plugin.Host, builtins plugin.Provider,
all: Reformat with gofumpt Per team discussion, switching to gofumpt. [gofumpt][1] is an alternative, stricter alternative to gofmt. It addresses other stylistic concerns that gofmt doesn't yet cover. [1]: https://github.com/mvdan/gofumpt See the full list of [Added rules][2], but it includes: - Dropping empty lines around function bodies - Dropping unnecessary variable grouping when there's only one variable - Ensuring an empty line between multi-line functions - simplification (`-s` in gofmt) is always enabled - Ensuring multi-line function signatures end with `) {` on a separate line. [2]: https://github.com/mvdan/gofumpt#Added-rules gofumpt is stricter, but there's no lock-in. All gofumpt output is valid gofmt output, so if we decide we don't like it, it's easy to switch back without any code changes. gofumpt support is built into the tooling we use for development so this won't change development workflows. - golangci-lint includes a gofumpt check (enabled in this PR) - gopls, the LSP for Go, includes a gofumpt option (see [installation instrutions][3]) [3]: https://github.com/mvdan/gofumpt#installation This change was generated by running: ```bash gofumpt -w $(rg --files -g '*.go' | rg -v testdata | rg -v compilation_error) ``` The following files were manually tweaked afterwards: - pkg/cmd/pulumi/stack_change_secrets_provider.go: one of the lines overflowed and had comments in an inconvenient place - pkg/cmd/pulumi/destroy.go: `var x T = y` where `T` wasn't necessary - pkg/cmd/pulumi/policy_new.go: long line because of error message - pkg/backend/snapshot_test.go: long line trying to assign three variables in the same assignment I have included mention of gofumpt in the CONTRIBUTING.md.
2023-03-03 16:36:39 +00:00
) (plugin.Provider, error) {
if builtins != nil && pkg == builtins.Pkg() {
return builtins, nil
}
provider, err := host.Provider(pkg, version)
if err == nil {
return provider, nil
}
// host.Provider _might_ return MissingError, this could be due to the fact that a transitive
// version of a plugin is required which are not picked up by initial pass of required plugin
// installations or because of bugs in GetRequiredPlugins. Instead of reporting an error, we first try to
// install the plugin now, and only error if we can't do that.
var me *workspace.MissingError
if !errors.As(err, &me) {
// Not a MissingError, return the original error.
return nil, err
}
Add an envar to disable automatic provider installation (#14083) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> This is primarily for the providers team to enable during builds so they can have more confidence about reproducibility of builds (especially examples conversion), but I imagine some customers would enable this as well. Fixes #14086 ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [x] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-10-03 15:35:23 +00:00
// Try to install the plugin, unless auto plugin installs are turned off, we have all the specific information we
// need to do so here while once we call into `host.Provider` we no longer have the download URL or checksums.
if env.DisableAutomaticPluginAcquisition.Value() {
return nil, err
}
pluginSpec := workspace.PluginSpec{
Kind: apitype.ResourcePlugin,
Name: string(pkg),
Version: version,
PluginDownloadURL: downloadURL,
Checksums: checksums,
}
log := func(sev diag.Severity, msg string) {
host.Log(sev, "", msg, 0)
}
_, err = pkgWorkspace.InstallPlugin(pluginSpec, log)
if err != nil {
return nil, err
}
// Try to load the provider again, this time it should succeed.
return host.Provider(pkg, version)
}
Initial work for parameterized providers (#16281) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> This is the first part of paramaterized providers in the engine. This only supports "replacement" packages, that is where we fully replace a providers package with a new package (think how dynamic tfbridge will work, vs how crd2pulumi will work). I've made the decision to _not_ support using parameterised providers by sending the parameter in the RegisterResource request. This will necessitate some different work in how we send the parameter for explicit providers compared to version and pluginDownloadURL, but I think it's worth it going forward. No changelog as this is still basically unusable without codegen support done, and should still be considered primarily for internal experimental use for now. ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-10 17:28:47 +00:00
// loadParameterizedProvider wraps loadProvider to also support loading parameterized providers.
func loadParameterizedProvider(
name tokens.Package, version *semver.Version, downloadURL string, checksums map[string][]byte,
parameter *ProviderParameterization,
Initial work for parameterized providers (#16281) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> This is the first part of paramaterized providers in the engine. This only supports "replacement" packages, that is where we fully replace a providers package with a new package (think how dynamic tfbridge will work, vs how crd2pulumi will work). I've made the decision to _not_ support using parameterised providers by sending the parameter in the RegisterResource request. This will necessitate some different work in how we send the parameter for explicit providers compared to version and pluginDownloadURL, but I think it's worth it going forward. No changelog as this is still basically unusable without codegen support done, and should still be considered primarily for internal experimental use for now. ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-10 17:28:47 +00:00
host plugin.Host, builtins plugin.Provider,
) (plugin.Provider, error) {
provider, err := loadProvider(name, version, downloadURL, checksums, host, builtins)
Initial work for parameterized providers (#16281) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> This is the first part of paramaterized providers in the engine. This only supports "replacement" packages, that is where we fully replace a providers package with a new package (think how dynamic tfbridge will work, vs how crd2pulumi will work). I've made the decision to _not_ support using parameterised providers by sending the parameter in the RegisterResource request. This will necessitate some different work in how we send the parameter for explicit providers compared to version and pluginDownloadURL, but I think it's worth it going forward. No changelog as this is still basically unusable without codegen support done, and should still be considered primarily for internal experimental use for now. ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-10 17:28:47 +00:00
if err != nil {
return nil, err
}
if parameter != nil {
resp, err := provider.Parameterize(context.TODO(), plugin.ParameterizeRequest{
Parameters: &plugin.ParameterizeValue{
Name: string(parameter.name),
Version: parameter.version,
Initial work for parameterized providers (#16281) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> This is the first part of paramaterized providers in the engine. This only supports "replacement" packages, that is where we fully replace a providers package with a new package (think how dynamic tfbridge will work, vs how crd2pulumi will work). I've made the decision to _not_ support using parameterised providers by sending the parameter in the RegisterResource request. This will necessitate some different work in how we send the parameter for explicit providers compared to version and pluginDownloadURL, but I think it's worth it going forward. No changelog as this is still basically unusable without codegen support done, and should still be considered primarily for internal experimental use for now. ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-10 17:28:47 +00:00
Value: parameter.value,
},
})
if err != nil {
return nil, err
}
if resp.Name != string(parameter.name) {
return nil, fmt.Errorf("parameterize response name %q does not match expected package %q", resp.Name, parameter.name)
Initial work for parameterized providers (#16281) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> This is the first part of paramaterized providers in the engine. This only supports "replacement" packages, that is where we fully replace a providers package with a new package (think how dynamic tfbridge will work, vs how crd2pulumi will work). I've made the decision to _not_ support using parameterised providers by sending the parameter in the RegisterResource request. This will necessitate some different work in how we send the parameter for explicit providers compared to version and pluginDownloadURL, but I think it's worth it going forward. No changelog as this is still basically unusable without codegen support done, and should still be considered primarily for internal experimental use for now. ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-10 17:28:47 +00:00
}
}
return provider, nil
}
Don't load providers at startup This changes the provider registry to no longer load all the providers from the old state on startup (in `NewRegistry`) instead the load logic has been moved to the `Same` method. The step_executor and step_generator have been fixed up to ensure that for cases where a resource might not have had it's provider created yet (i.e. for DBR'ing the old version of a resource, for refreshes or deletes) they ask the `Deployment` to look up the provider in the old state and `Same` it in the registry. All of the above means we only load providers we're going to use (even taking --targets into account). One fix mot done in this change is to auto-update providers for deletes. That is given a program state with two resources both using V1 of a provider, if you run the program to update one of those resource to use V2 of the provider but to delete the other resource currently we'll still load V1 to do that delete. It _might_ be possible (although this is definitly questionable) to see that another resource changed it's provider from V1 to V2 and to just assume the same change should have happened to the deleted resource. This could be helpful for not loading old provider versions at all, but can be done in two passes now pretty easily. Just run `up` without any program changes except for the SDK version bump to update all the provider references to V2 of the provider, then do another `up` that deletes the second resource. Fixes https://github.com/pulumi/pulumi/issues/12177.
2023-04-12 09:35:20 +00:00
// NewRegistry creates a new provider registry using the given host.
func NewRegistry(host plugin.Host, isPreview bool, builtins plugin.Provider) *Registry {
return &Registry{
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
host: host,
isPreview: isPreview,
providers: make(map[Reference]plugin.Provider),
builtins: builtins,
2021-07-28 19:12:53 +00:00
aliases: make(map[resource.URN]resource.URN),
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
}
}
// GetProvider returns the provider plugin that is currently registered under the given reference, if any.
func (r *Registry) GetProvider(ref Reference) (plugin.Provider, bool) {
r.m.RLock()
defer r.m.RUnlock()
logging.V(7).Infof("GetProvider(%v)", ref)
provider, ok := r.providers[ref]
return provider, ok
}
func (r *Registry) setProvider(ref Reference, provider plugin.Provider) {
r.m.Lock()
defer r.m.Unlock()
logging.V(7).Infof("setProvider(%v)", ref)
r.providers[ref] = provider
2021-07-28 19:12:53 +00:00
if alias, ok := r.aliases[ref.URN()]; ok {
r.providers[mustNewReference(alias, ref.ID())] = provider
}
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
}
func (r *Registry) deleteProvider(ref Reference) (plugin.Provider, bool) {
r.m.Lock()
defer r.m.Unlock()
provider, ok := r.providers[ref]
if !ok {
return nil, false
}
delete(r.providers, ref)
return provider, true
}
// The rest of the methods below are the implementation of the plugin.Provider interface methods.
func (r *Registry) Close() error {
return nil
}
func (r *Registry) Pkg() tokens.Package {
return "pulumi"
}
func (r *Registry) label() string {
return "ProviderRegistry"
}
func (r *Registry) Parameterize(context.Context, plugin.ParameterizeRequest) (plugin.ParameterizeResponse, error) {
Add Paramaterize to provider interface (#16174) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> This is the bare bones changes required to update the provider interface for parametrization. Nothing in the engine, sdks, cli, or codegen makes use of these new methods yet. But providers team can start building on top of this interface. Note that this is subject to change, while this is _likely_ the right design for parametrised providers there is a chance that we need to edit this interface before GA release. ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [x] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-05-15 16:22:39 +00:00
contract.Failf("Parameterize must not be called on the provider registry")
return plugin.ParameterizeResponse{}, errors.New("the provider registry has no parameters")
Add Paramaterize to provider interface (#16174) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> This is the bare bones changes required to update the provider interface for parametrization. Nothing in the engine, sdks, cli, or codegen makes use of these new methods yet. But providers team can start building on top of this interface. Note that this is subject to change, while this is _likely_ the right design for parametrised providers there is a chance that we need to edit this interface before GA release. ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [x] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-05-15 16:22:39 +00:00
}
// GetSchema returns the JSON-serialized schema for the provider.
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
func (r *Registry) GetSchema(context.Context, plugin.GetSchemaRequest) (plugin.GetSchemaResponse, error) {
contract.Failf("GetSchema must not be called on the provider registry")
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
return plugin.GetSchemaResponse{}, errors.New("the provider registry has no schema")
}
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
func (r *Registry) GetMapping(context.Context, plugin.GetMappingRequest) (plugin.GetMappingResponse, error) {
contract.Failf("GetMapping must not be called on the provider registry")
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
return plugin.GetMappingResponse{}, errors.New("the provider registry has no mappings")
}
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
func (r *Registry) GetMappings(context.Context, plugin.GetMappingsRequest) (plugin.GetMappingsResponse, error) {
More efficent mapping lookup (#13975) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Inspired by a comment from Zaid. This allows providers to return what providers they have mapping information for without having to marshal all their mapping data to the engine at the same time, this could save transmitting a lot of data that the engine might not ever need (for example if it's not converting code for that specific provider). It also allows provider to support mulitple mappings. ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [x] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-09-21 11:45:07 +00:00
contract.Failf("GetMappings must not be called on the provider registry")
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
return plugin.GetMappingsResponse{}, errors.New("the provider registry has no mappings")
More efficent mapping lookup (#13975) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Inspired by a comment from Zaid. This allows providers to return what providers they have mapping information for without having to marshal all their mapping data to the engine at the same time, this could save transmitting a lot of data that the engine might not ever need (for example if it's not converting code for that specific provider). It also allows provider to support mulitple mappings. ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [x] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-09-21 11:45:07 +00:00
}
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
// CheckConfig validates the configuration for this resource provider.
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
func (r *Registry) CheckConfig(context.Context, plugin.CheckConfigRequest) (plugin.CheckConfigResponse, error) {
contract.Failf("CheckConfig must not be called on the provider registry")
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
return plugin.CheckConfigResponse{}, errors.New("the provider registry is not configurable")
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
}
// DiffConfig checks what impacts a hypothetical change to this provider's configuration will have on the provider.
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
func (r *Registry) DiffConfig(context.Context, plugin.DiffConfigRequest) (plugin.DiffConfigResponse, error) {
contract.Failf("DiffConfig must not be called on the provider registry")
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
return plugin.DiffResult{}, errors.New("the provider registry is not configurable")
}
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
func (r *Registry) Configure(context.Context, plugin.ConfigureRequest) (plugin.ConfigureResponse, error) {
contract.Failf("Configure must not be called on the provider registry")
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
return plugin.ConfigureResponse{}, errors.New("the provider registry is not configurable")
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
}
// Check validates the configuration for a particular provider resource.
//
// The particulars of Check are a bit subtle for a few reasons:
2022-09-14 02:12:02 +00:00
// - we need to load the provider for the package indicated by the type name portion provider resource's URN in order
// to check its config
// - we need to keep the newly-loaded provider around in case we need to diff its config
// - if we are running a preview, we need to configure the provider, as its corresponding CRUD operations will not run
// (we would normally configure the provider in Create or Update).
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
func (r *Registry) Check(ctx context.Context, req plugin.CheckRequest) (plugin.CheckResponse, error) {
contract.Requiref(IsProviderType(req.URN.Type()), "urn", "must be a provider type, got %v", req.URN.Type())
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
label := fmt.Sprintf("%s.Check(%s)", r.label(), req.URN)
logging.V(7).Infof("%s executing (#olds=%d,#news=%d)", label, len(req.Olds), len(req.News))
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
// Parse the version from the provider properties and load the provider.
providerPkg := GetProviderPackage(req.URN.Type())
name, err := GetProviderName(providerPkg, req.News)
if err != nil {
return plugin.CheckResponse{Failures: []plugin.CheckFailure{{
Property: "name", Reason: err.Error(),
}}}, nil
}
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
version, err := GetProviderVersion(req.News)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
if err != nil {
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
return plugin.CheckResponse{Failures: []plugin.CheckFailure{{
Property: "version", Reason: err.Error(),
}}}, nil
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
}
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
downloadURL, err := GetProviderDownloadURL(req.News)
if err != nil {
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
return plugin.CheckResponse{Failures: []plugin.CheckFailure{{
Property: "pluginDownloadURL", Reason: err.Error(),
}}}, nil
}
parameter, err := GetProviderParameterization(providerPkg, req.News)
Initial work for parameterized providers (#16281) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> This is the first part of paramaterized providers in the engine. This only supports "replacement" packages, that is where we fully replace a providers package with a new package (think how dynamic tfbridge will work, vs how crd2pulumi will work). I've made the decision to _not_ support using parameterised providers by sending the parameter in the RegisterResource request. This will necessitate some different work in how we send the parameter for explicit providers compared to version and pluginDownloadURL, but I think it's worth it going forward. No changelog as this is still basically unusable without codegen support done, and should still be considered primarily for internal experimental use for now. ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-10 17:28:47 +00:00
if err != nil {
return plugin.CheckResponse{Failures: []plugin.CheckFailure{{
Property: "parameter", Reason: err.Error(),
}}}, nil
}
// TODO: We should thread checksums through here.
Initial work for parameterized providers (#16281) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> This is the first part of paramaterized providers in the engine. This only supports "replacement" packages, that is where we fully replace a providers package with a new package (think how dynamic tfbridge will work, vs how crd2pulumi will work). I've made the decision to _not_ support using parameterised providers by sending the parameter in the RegisterResource request. This will necessitate some different work in how we send the parameter for explicit providers compared to version and pluginDownloadURL, but I think it's worth it going forward. No changelog as this is still basically unusable without codegen support done, and should still be considered primarily for internal experimental use for now. ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-10 17:28:47 +00:00
provider, err := loadParameterizedProvider(
name, version, downloadURL, nil, parameter, r.host, r.builtins)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
if err != nil {
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
return plugin.CheckResponse{}, err
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
}
if provider == nil {
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
return plugin.CheckResponse{}, errors.New("could not find plugin")
}
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
// Check the provider's config. If the check fails, unload the provider.
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
resp, err := provider.CheckConfig(ctx, plugin.CheckConfigRequest{
URN: req.URN,
Olds: req.Olds,
News: req.News,
AllowUnknowns: true,
})
if len(resp.Failures) != 0 || err != nil {
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
closeErr := r.host.CloseProvider(provider)
contract.IgnoreError(closeErr)
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
return plugin.CheckResponse{Failures: resp.Failures}, err
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
}
Reuse provider instances where possible (#14127) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes https://github.com/pulumi/pulumi/issues/13987. This reworks the registry to better track provider instances such that we can reuse unconfigured instances between Creates, Updates, and Sames. When we allocate a provider instance in the registry for a Check call we save it with the special id "unconfigured". This value should never make its way back to program SDKs, it's purely an internal value for the engine. When we do a Create, Update or Same we look to see if there's an unconfigured provider to use and if so configures that one, else it starts up a fresh one. (N.B. Update we can assume there will always be an unconfigured one from the Check call before). This has also fixed registry Create to use the ID `UnknownID` rather than `""`, have added some contract assertions to check that and fixed up some test fallout because of that (the tests had been getting away with leaving ID blank before). ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-10-12 20:46:01 +00:00
// Create a provider reference using the URN and the unconfigured ID and register the provider.
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
r.setProvider(mustNewReference(req.URN, UnconfiguredID), provider)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
return plugin.CheckResponse{Properties: resp.Properties}, nil
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
}
2021-07-28 19:12:53 +00:00
// RegisterAliases informs the registry that the new provider object with the given URN is aliased to the given list
// of URNs.
func (r *Registry) RegisterAlias(providerURN, alias resource.URN) {
r.m.Lock()
defer r.m.Unlock()
2021-07-28 19:12:53 +00:00
if providerURN != alias {
r.aliases[providerURN] = alias
}
}
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
// Diff diffs the configuration of the indicated provider. The provider corresponding to the given URN must have
// previously been loaded by a call to Check.
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
func (r *Registry) Diff(ctx context.Context, req plugin.DiffRequest) (plugin.DiffResponse, error) {
contract.Requiref(req.ID != "", "id", "must not be empty")
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
label := fmt.Sprintf("%s.Diff(%s,%s)", r.label(), req.URN, req.ID)
logging.V(7).Infof("%s: executing (#oldInputs=%d#oldOutputs=%d,#newInputs=%d)",
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
label, len(req.OldInputs), len(req.OldOutputs), len(req.NewInputs))
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
Reuse provider instances where possible (#14127) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes https://github.com/pulumi/pulumi/issues/13987. This reworks the registry to better track provider instances such that we can reuse unconfigured instances between Creates, Updates, and Sames. When we allocate a provider instance in the registry for a Check call we save it with the special id "unconfigured". This value should never make its way back to program SDKs, it's purely an internal value for the engine. When we do a Create, Update or Same we look to see if there's an unconfigured provider to use and if so configures that one, else it starts up a fresh one. (N.B. Update we can assume there will always be an unconfigured one from the Check call before). This has also fixed registry Create to use the ID `UnknownID` rather than `""`, have added some contract assertions to check that and fixed up some test fallout because of that (the tests had been getting away with leaving ID blank before). ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-10-12 20:46:01 +00:00
// Create a reference using the URN and the unconfigured ID and fetch the provider.
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
provider, ok := r.GetProvider(mustNewReference(req.URN, UnconfiguredID))
Implement more precise delete-before-replace semantics. (#2369) This implements the new algorithm for deciding which resources must be deleted due to a delete-before-replace operation. We need to compute the set of resources that may be replaced by a change to the resource under consideration. We do this by taking the complete set of transitive dependents on the resource under consideration and removing any resources that would not be replaced by changes to their dependencies. We determine whether or not a resource may be replaced by substituting unknowns for input properties that may change due to deletion of the resources their value depends on and calling the resource provider's Diff method. This is perhaps clearer when described by example. Consider the following dependency graph: A __|__ B C | _|_ D E F In this graph, all of B, C, D, E, and F transitively depend on A. It may be the case, however, that changes to the specific properties of any of those resources R that would occur if a resource on the path to A were deleted and recreated may not cause R to be replaced. For example, the edge from B to A may be a simple dependsOn edge such that a change to B does not actually influence any of B's input properties. In that case, neither B nor D would need to be deleted before A could be deleted. In order to make the above algorithm a reality, the resource monitor interface has been updated to include a map that associates an input property key with the list of resources that input property depends on. Older clients of the resource monitor will leave this map empty, in which case all input properties will be treated as depending on all dependencies of the resource. This is probably overly conservative, but it is less conservative than what we currently implement, and is certainly correct.
2019-01-28 17:46:30 +00:00
if !ok {
Reuse provider instances where possible (#14127) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes https://github.com/pulumi/pulumi/issues/13987. This reworks the registry to better track provider instances such that we can reuse unconfigured instances between Creates, Updates, and Sames. When we allocate a provider instance in the registry for a Check call we save it with the special id "unconfigured". This value should never make its way back to program SDKs, it's purely an internal value for the engine. When we do a Create, Update or Same we look to see if there's an unconfigured provider to use and if so configures that one, else it starts up a fresh one. (N.B. Update we can assume there will always be an unconfigured one from the Check call before). This has also fixed registry Create to use the ID `UnknownID` rather than `""`, have added some contract assertions to check that and fixed up some test fallout because of that (the tests had been getting away with leaving ID blank before). ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-10-12 20:46:01 +00:00
// If the provider was not found in the registry under its URN and the unconfigured ID, then it must have not have
Implement more precise delete-before-replace semantics. (#2369) This implements the new algorithm for deciding which resources must be deleted due to a delete-before-replace operation. We need to compute the set of resources that may be replaced by a change to the resource under consideration. We do this by taking the complete set of transitive dependents on the resource under consideration and removing any resources that would not be replaced by changes to their dependencies. We determine whether or not a resource may be replaced by substituting unknowns for input properties that may change due to deletion of the resources their value depends on and calling the resource provider's Diff method. This is perhaps clearer when described by example. Consider the following dependency graph: A __|__ B C | _|_ D E F In this graph, all of B, C, D, E, and F transitively depend on A. It may be the case, however, that changes to the specific properties of any of those resources R that would occur if a resource on the path to A were deleted and recreated may not cause R to be replaced. For example, the edge from B to A may be a simple dependsOn edge such that a change to B does not actually influence any of B's input properties. In that case, neither B nor D would need to be deleted before A could be deleted. In order to make the above algorithm a reality, the resource monitor interface has been updated to include a map that associates an input property key with the list of resources that input property depends on. Older clients of the resource monitor will leave this map empty, in which case all input properties will be treated as depending on all dependencies of the resource. This is probably overly conservative, but it is less conservative than what we currently implement, and is certainly correct.
2019-01-28 17:46:30 +00:00
// been subject to a call to `Check`. This can happen when we are diffing a provider's inputs as part of
// evaluating the fanout of a delete-before-replace operation. In this case, we can just use the old provider
Don't load providers at startup This changes the provider registry to no longer load all the providers from the old state on startup (in `NewRegistry`) instead the load logic has been moved to the `Same` method. The step_executor and step_generator have been fixed up to ensure that for cases where a resource might not have had it's provider created yet (i.e. for DBR'ing the old version of a resource, for refreshes or deletes) they ask the `Deployment` to look up the provider in the old state and `Same` it in the registry. All of the above means we only load providers we're going to use (even taking --targets into account). One fix mot done in this change is to auto-update providers for deletes. That is given a program state with two resources both using V1 of a provider, if you run the program to update one of those resource to use V2 of the provider but to delete the other resource currently we'll still load V1 to do that delete. It _might_ be possible (although this is definitly questionable) to see that another resource changed it's provider from V1 to V2 and to just assume the same change should have happened to the deleted resource. This could be helpful for not loading old provider versions at all, but can be done in two passes now pretty easily. Just run `up` without any program changes except for the SDK version bump to update all the provider references to V2 of the provider, then do another `up` that deletes the second resource. Fixes https://github.com/pulumi/pulumi/issues/12177.
2023-04-12 09:35:20 +00:00
// (which we should have loaded during diff search), and we will not unload it.
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
provider, ok = r.GetProvider(mustNewReference(req.URN, req.ID))
contract.Assertf(ok, "Provider must have been registered at some point for DBR Diff (%v::%v)", req.URN, req.ID)
Implement more precise delete-before-replace semantics. (#2369) This implements the new algorithm for deciding which resources must be deleted due to a delete-before-replace operation. We need to compute the set of resources that may be replaced by a change to the resource under consideration. We do this by taking the complete set of transitive dependents on the resource under consideration and removing any resources that would not be replaced by changes to their dependencies. We determine whether or not a resource may be replaced by substituting unknowns for input properties that may change due to deletion of the resources their value depends on and calling the resource provider's Diff method. This is perhaps clearer when described by example. Consider the following dependency graph: A __|__ B C | _|_ D E F In this graph, all of B, C, D, E, and F transitively depend on A. It may be the case, however, that changes to the specific properties of any of those resources R that would occur if a resource on the path to A were deleted and recreated may not cause R to be replaced. For example, the edge from B to A may be a simple dependsOn edge such that a change to B does not actually influence any of B's input properties. In that case, neither B nor D would need to be deleted before A could be deleted. In order to make the above algorithm a reality, the resource monitor interface has been updated to include a map that associates an input property key with the list of resources that input property depends on. Older clients of the resource monitor will leave this map empty, in which case all input properties will be treated as depending on all dependencies of the resource. This is probably overly conservative, but it is less conservative than what we currently implement, and is certainly correct.
2019-01-28 17:46:30 +00:00
}
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
// Diff the properties.
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
diff, err := provider.DiffConfig(context.Background(), plugin.DiffConfigRequest{
URN: req.URN,
OldInputs: req.OldInputs,
OldOutputs: req.OldOutputs,
NewInputs: req.NewInputs,
AllowUnknowns: req.AllowUnknowns,
IgnoreChanges: req.IgnoreChanges,
})
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
if err != nil {
return plugin.DiffResult{Changes: plugin.DiffUnknown}, err
}
if diff.Changes == plugin.DiffUnknown {
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
if req.OldOutputs.DeepEquals(req.NewInputs) {
diff.Changes = plugin.DiffNone
} else {
diff.Changes = plugin.DiffSome
}
}
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
// If the diff requires replacement, unload the provider: the engine will reload it during its replacememnt Check.
if diff.Replace() {
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
closeErr := r.host.CloseProvider(provider)
contract.IgnoreError(closeErr)
}
2021-07-28 19:12:53 +00:00
logging.V(7).Infof("%s: executed (%#v, %#v)", label, diff.Changes, diff.ReplaceKeys)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
return diff, nil
}
Don't load providers at startup This changes the provider registry to no longer load all the providers from the old state on startup (in `NewRegistry`) instead the load logic has been moved to the `Same` method. The step_executor and step_generator have been fixed up to ensure that for cases where a resource might not have had it's provider created yet (i.e. for DBR'ing the old version of a resource, for refreshes or deletes) they ask the `Deployment` to look up the provider in the old state and `Same` it in the registry. All of the above means we only load providers we're going to use (even taking --targets into account). One fix mot done in this change is to auto-update providers for deletes. That is given a program state with two resources both using V1 of a provider, if you run the program to update one of those resource to use V2 of the provider but to delete the other resource currently we'll still load V1 to do that delete. It _might_ be possible (although this is definitly questionable) to see that another resource changed it's provider from V1 to V2 and to just assume the same change should have happened to the deleted resource. This could be helpful for not loading old provider versions at all, but can be done in two passes now pretty easily. Just run `up` without any program changes except for the SDK version bump to update all the provider references to V2 of the provider, then do another `up` that deletes the second resource. Fixes https://github.com/pulumi/pulumi/issues/12177.
2023-04-12 09:35:20 +00:00
// Same executes as part of the "Same" step for a provider that has not changed. It configures the provider
// instance with the given state and fixes up aliases.
func (r *Registry) Same(res *resource.State) error {
urn := res.URN
if !IsProviderType(urn.Type()) {
return fmt.Errorf("urn %v is not a provider type", urn)
}
2021-07-28 19:12:53 +00:00
Don't load providers at startup This changes the provider registry to no longer load all the providers from the old state on startup (in `NewRegistry`) instead the load logic has been moved to the `Same` method. The step_executor and step_generator have been fixed up to ensure that for cases where a resource might not have had it's provider created yet (i.e. for DBR'ing the old version of a resource, for refreshes or deletes) they ask the `Deployment` to look up the provider in the old state and `Same` it in the registry. All of the above means we only load providers we're going to use (even taking --targets into account). One fix mot done in this change is to auto-update providers for deletes. That is given a program state with two resources both using V1 of a provider, if you run the program to update one of those resource to use V2 of the provider but to delete the other resource currently we'll still load V1 to do that delete. It _might_ be possible (although this is definitly questionable) to see that another resource changed it's provider from V1 to V2 and to just assume the same change should have happened to the deleted resource. This could be helpful for not loading old provider versions at all, but can be done in two passes now pretty easily. Just run `up` without any program changes except for the SDK version bump to update all the provider references to V2 of the provider, then do another `up` that deletes the second resource. Fixes https://github.com/pulumi/pulumi/issues/12177.
2023-04-12 09:35:20 +00:00
// Ensure that this provider has a known ID.
if res.ID == "" || res.ID == UnknownID {
return fmt.Errorf("provider '%v' has an unknown ID", urn)
}
ref := mustNewReference(urn, res.ID)
2021-07-28 19:12:53 +00:00
logging.V(7).Infof("Same(%v)", ref)
Don't load providers at startup This changes the provider registry to no longer load all the providers from the old state on startup (in `NewRegistry`) instead the load logic has been moved to the `Same` method. The step_executor and step_generator have been fixed up to ensure that for cases where a resource might not have had it's provider created yet (i.e. for DBR'ing the old version of a resource, for refreshes or deletes) they ask the `Deployment` to look up the provider in the old state and `Same` it in the registry. All of the above means we only load providers we're going to use (even taking --targets into account). One fix mot done in this change is to auto-update providers for deletes. That is given a program state with two resources both using V1 of a provider, if you run the program to update one of those resource to use V2 of the provider but to delete the other resource currently we'll still load V1 to do that delete. It _might_ be possible (although this is definitly questionable) to see that another resource changed it's provider from V1 to V2 and to just assume the same change should have happened to the deleted resource. This could be helpful for not loading old provider versions at all, but can be done in two passes now pretty easily. Just run `up` without any program changes except for the SDK version bump to update all the provider references to V2 of the provider, then do another `up` that deletes the second resource. Fixes https://github.com/pulumi/pulumi/issues/12177.
2023-04-12 09:35:20 +00:00
// If this provider is already configured, then we're done.
_, ok := r.GetProvider(ref)
if ok {
return nil
}
Reuse provider instances where possible (#14127) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes https://github.com/pulumi/pulumi/issues/13987. This reworks the registry to better track provider instances such that we can reuse unconfigured instances between Creates, Updates, and Sames. When we allocate a provider instance in the registry for a Check call we save it with the special id "unconfigured". This value should never make its way back to program SDKs, it's purely an internal value for the engine. When we do a Create, Update or Same we look to see if there's an unconfigured provider to use and if so configures that one, else it starts up a fresh one. (N.B. Update we can assume there will always be an unconfigured one from the Check call before). This has also fixed registry Create to use the ID `UnknownID` rather than `""`, have added some contract assertions to check that and fixed up some test fallout because of that (the tests had been getting away with leaving ID blank before). ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-10-12 20:46:01 +00:00
// We may have started this provider up for Check/Diff, but then decided to Same it, if so we can just
// reuse that instance, but as we're now configuring it remove the unconfigured ID from the provider map
// so nothing else tries to use it.
provider, ok := r.deleteProvider(mustNewReference(urn, UnconfiguredID))
if !ok {
// Else we need to load it fresh
providerPkg := GetProviderPackage(urn.Type())
Don't load providers at startup This changes the provider registry to no longer load all the providers from the old state on startup (in `NewRegistry`) instead the load logic has been moved to the `Same` method. The step_executor and step_generator have been fixed up to ensure that for cases where a resource might not have had it's provider created yet (i.e. for DBR'ing the old version of a resource, for refreshes or deletes) they ask the `Deployment` to look up the provider in the old state and `Same` it in the registry. All of the above means we only load providers we're going to use (even taking --targets into account). One fix mot done in this change is to auto-update providers for deletes. That is given a program state with two resources both using V1 of a provider, if you run the program to update one of those resource to use V2 of the provider but to delete the other resource currently we'll still load V1 to do that delete. It _might_ be possible (although this is definitly questionable) to see that another resource changed it's provider from V1 to V2 and to just assume the same change should have happened to the deleted resource. This could be helpful for not loading old provider versions at all, but can be done in two passes now pretty easily. Just run `up` without any program changes except for the SDK version bump to update all the provider references to V2 of the provider, then do another `up` that deletes the second resource. Fixes https://github.com/pulumi/pulumi/issues/12177.
2023-04-12 09:35:20 +00:00
Reuse provider instances where possible (#14127) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes https://github.com/pulumi/pulumi/issues/13987. This reworks the registry to better track provider instances such that we can reuse unconfigured instances between Creates, Updates, and Sames. When we allocate a provider instance in the registry for a Check call we save it with the special id "unconfigured". This value should never make its way back to program SDKs, it's purely an internal value for the engine. When we do a Create, Update or Same we look to see if there's an unconfigured provider to use and if so configures that one, else it starts up a fresh one. (N.B. Update we can assume there will always be an unconfigured one from the Check call before). This has also fixed registry Create to use the ID `UnknownID` rather than `""`, have added some contract assertions to check that and fixed up some test fallout because of that (the tests had been getting away with leaving ID blank before). ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-10-12 20:46:01 +00:00
// Parse the provider version, then load, configure, and register the provider.
name, err := GetProviderName(providerPkg, res.Inputs)
if err != nil {
return fmt.Errorf("parse name for %v provider '%v': %w", providerPkg, urn, err)
}
Reuse provider instances where possible (#14127) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes https://github.com/pulumi/pulumi/issues/13987. This reworks the registry to better track provider instances such that we can reuse unconfigured instances between Creates, Updates, and Sames. When we allocate a provider instance in the registry for a Check call we save it with the special id "unconfigured". This value should never make its way back to program SDKs, it's purely an internal value for the engine. When we do a Create, Update or Same we look to see if there's an unconfigured provider to use and if so configures that one, else it starts up a fresh one. (N.B. Update we can assume there will always be an unconfigured one from the Check call before). This has also fixed registry Create to use the ID `UnknownID` rather than `""`, have added some contract assertions to check that and fixed up some test fallout because of that (the tests had been getting away with leaving ID blank before). ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-10-12 20:46:01 +00:00
version, err := GetProviderVersion(res.Inputs)
if err != nil {
return fmt.Errorf("parse version for %v provider '%v': %w", providerPkg, urn, err)
Reuse provider instances where possible (#14127) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes https://github.com/pulumi/pulumi/issues/13987. This reworks the registry to better track provider instances such that we can reuse unconfigured instances between Creates, Updates, and Sames. When we allocate a provider instance in the registry for a Check call we save it with the special id "unconfigured". This value should never make its way back to program SDKs, it's purely an internal value for the engine. When we do a Create, Update or Same we look to see if there's an unconfigured provider to use and if so configures that one, else it starts up a fresh one. (N.B. Update we can assume there will always be an unconfigured one from the Check call before). This has also fixed registry Create to use the ID `UnknownID` rather than `""`, have added some contract assertions to check that and fixed up some test fallout because of that (the tests had been getting away with leaving ID blank before). ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-10-12 20:46:01 +00:00
}
downloadURL, err := GetProviderDownloadURL(res.Inputs)
if err != nil {
return fmt.Errorf("parse download URL for %v provider '%v': %w", providerPkg, urn, err)
Reuse provider instances where possible (#14127) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes https://github.com/pulumi/pulumi/issues/13987. This reworks the registry to better track provider instances such that we can reuse unconfigured instances between Creates, Updates, and Sames. When we allocate a provider instance in the registry for a Check call we save it with the special id "unconfigured". This value should never make its way back to program SDKs, it's purely an internal value for the engine. When we do a Create, Update or Same we look to see if there's an unconfigured provider to use and if so configures that one, else it starts up a fresh one. (N.B. Update we can assume there will always be an unconfigured one from the Check call before). This has also fixed registry Create to use the ID `UnknownID` rather than `""`, have added some contract assertions to check that and fixed up some test fallout because of that (the tests had been getting away with leaving ID blank before). ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-10-12 20:46:01 +00:00
}
parameter, err := GetProviderParameterization(providerPkg, res.Inputs)
Initial work for parameterized providers (#16281) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> This is the first part of paramaterized providers in the engine. This only supports "replacement" packages, that is where we fully replace a providers package with a new package (think how dynamic tfbridge will work, vs how crd2pulumi will work). I've made the decision to _not_ support using parameterised providers by sending the parameter in the RegisterResource request. This will necessitate some different work in how we send the parameter for explicit providers compared to version and pluginDownloadURL, but I think it's worth it going forward. No changelog as this is still basically unusable without codegen support done, and should still be considered primarily for internal experimental use for now. ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-10 17:28:47 +00:00
if err != nil {
return fmt.Errorf("parse parameter for %v provider '%v': %w", providerPkg, urn, err)
}
Reuse provider instances where possible (#14127) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes https://github.com/pulumi/pulumi/issues/13987. This reworks the registry to better track provider instances such that we can reuse unconfigured instances between Creates, Updates, and Sames. When we allocate a provider instance in the registry for a Check call we save it with the special id "unconfigured". This value should never make its way back to program SDKs, it's purely an internal value for the engine. When we do a Create, Update or Same we look to see if there's an unconfigured provider to use and if so configures that one, else it starts up a fresh one. (N.B. Update we can assume there will always be an unconfigured one from the Check call before). This has also fixed registry Create to use the ID `UnknownID` rather than `""`, have added some contract assertions to check that and fixed up some test fallout because of that (the tests had been getting away with leaving ID blank before). ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-10-12 20:46:01 +00:00
// TODO: We should thread checksums through here.
provider, err = loadParameterizedProvider(name, version, downloadURL, nil, parameter, r.host, r.builtins)
Reuse provider instances where possible (#14127) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes https://github.com/pulumi/pulumi/issues/13987. This reworks the registry to better track provider instances such that we can reuse unconfigured instances between Creates, Updates, and Sames. When we allocate a provider instance in the registry for a Check call we save it with the special id "unconfigured". This value should never make its way back to program SDKs, it's purely an internal value for the engine. When we do a Create, Update or Same we look to see if there's an unconfigured provider to use and if so configures that one, else it starts up a fresh one. (N.B. Update we can assume there will always be an unconfigured one from the Check call before). This has also fixed registry Create to use the ID `UnknownID` rather than `""`, have added some contract assertions to check that and fixed up some test fallout because of that (the tests had been getting away with leaving ID blank before). ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-10-12 20:46:01 +00:00
if err != nil {
return fmt.Errorf("load plugin for %v provider '%v': %w", providerPkg, urn, err)
Reuse provider instances where possible (#14127) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes https://github.com/pulumi/pulumi/issues/13987. This reworks the registry to better track provider instances such that we can reuse unconfigured instances between Creates, Updates, and Sames. When we allocate a provider instance in the registry for a Check call we save it with the special id "unconfigured". This value should never make its way back to program SDKs, it's purely an internal value for the engine. When we do a Create, Update or Same we look to see if there's an unconfigured provider to use and if so configures that one, else it starts up a fresh one. (N.B. Update we can assume there will always be an unconfigured one from the Check call before). This has also fixed registry Create to use the ID `UnknownID` rather than `""`, have added some contract assertions to check that and fixed up some test fallout because of that (the tests had been getting away with leaving ID blank before). ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-10-12 20:46:01 +00:00
}
if provider == nil {
return fmt.Errorf("find plugin for %v provider '%v' at version %v", providerPkg, urn, version)
}
Don't load providers at startup This changes the provider registry to no longer load all the providers from the old state on startup (in `NewRegistry`) instead the load logic has been moved to the `Same` method. The step_executor and step_generator have been fixed up to ensure that for cases where a resource might not have had it's provider created yet (i.e. for DBR'ing the old version of a resource, for refreshes or deletes) they ask the `Deployment` to look up the provider in the old state and `Same` it in the registry. All of the above means we only load providers we're going to use (even taking --targets into account). One fix mot done in this change is to auto-update providers for deletes. That is given a program state with two resources both using V1 of a provider, if you run the program to update one of those resource to use V2 of the provider but to delete the other resource currently we'll still load V1 to do that delete. It _might_ be possible (although this is definitly questionable) to see that another resource changed it's provider from V1 to V2 and to just assume the same change should have happened to the deleted resource. This could be helpful for not loading old provider versions at all, but can be done in two passes now pretty easily. Just run `up` without any program changes except for the SDK version bump to update all the provider references to V2 of the provider, then do another `up` that deletes the second resource. Fixes https://github.com/pulumi/pulumi/issues/12177.
2023-04-12 09:35:20 +00:00
}
Reuse provider instances where possible (#14127) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes https://github.com/pulumi/pulumi/issues/13987. This reworks the registry to better track provider instances such that we can reuse unconfigured instances between Creates, Updates, and Sames. When we allocate a provider instance in the registry for a Check call we save it with the special id "unconfigured". This value should never make its way back to program SDKs, it's purely an internal value for the engine. When we do a Create, Update or Same we look to see if there's an unconfigured provider to use and if so configures that one, else it starts up a fresh one. (N.B. Update we can assume there will always be an unconfigured one from the Check call before). This has also fixed registry Create to use the ID `UnknownID` rather than `""`, have added some contract assertions to check that and fixed up some test fallout because of that (the tests had been getting away with leaving ID blank before). ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-10-12 20:46:01 +00:00
contract.Assertf(provider != nil, "provider must not be nil")
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
if _, err := provider.Configure(context.Background(), plugin.ConfigureRequest{
Inputs: res.Inputs,
}); err != nil {
Don't load providers at startup This changes the provider registry to no longer load all the providers from the old state on startup (in `NewRegistry`) instead the load logic has been moved to the `Same` method. The step_executor and step_generator have been fixed up to ensure that for cases where a resource might not have had it's provider created yet (i.e. for DBR'ing the old version of a resource, for refreshes or deletes) they ask the `Deployment` to look up the provider in the old state and `Same` it in the registry. All of the above means we only load providers we're going to use (even taking --targets into account). One fix mot done in this change is to auto-update providers for deletes. That is given a program state with two resources both using V1 of a provider, if you run the program to update one of those resource to use V2 of the provider but to delete the other resource currently we'll still load V1 to do that delete. It _might_ be possible (although this is definitly questionable) to see that another resource changed it's provider from V1 to V2 and to just assume the same change should have happened to the deleted resource. This could be helpful for not loading old provider versions at all, but can be done in two passes now pretty easily. Just run `up` without any program changes except for the SDK version bump to update all the provider references to V2 of the provider, then do another `up` that deletes the second resource. Fixes https://github.com/pulumi/pulumi/issues/12177.
2023-04-12 09:35:20 +00:00
closeErr := r.host.CloseProvider(provider)
contract.IgnoreError(closeErr)
return fmt.Errorf("configure provider '%v': %w", urn, err)
2021-07-28 19:12:53 +00:00
}
Don't load providers at startup This changes the provider registry to no longer load all the providers from the old state on startup (in `NewRegistry`) instead the load logic has been moved to the `Same` method. The step_executor and step_generator have been fixed up to ensure that for cases where a resource might not have had it's provider created yet (i.e. for DBR'ing the old version of a resource, for refreshes or deletes) they ask the `Deployment` to look up the provider in the old state and `Same` it in the registry. All of the above means we only load providers we're going to use (even taking --targets into account). One fix mot done in this change is to auto-update providers for deletes. That is given a program state with two resources both using V1 of a provider, if you run the program to update one of those resource to use V2 of the provider but to delete the other resource currently we'll still load V1 to do that delete. It _might_ be possible (although this is definitly questionable) to see that another resource changed it's provider from V1 to V2 and to just assume the same change should have happened to the deleted resource. This could be helpful for not loading old provider versions at all, but can be done in two passes now pretty easily. Just run `up` without any program changes except for the SDK version bump to update all the provider references to V2 of the provider, then do another `up` that deletes the second resource. Fixes https://github.com/pulumi/pulumi/issues/12177.
2023-04-12 09:35:20 +00:00
logging.V(7).Infof("loaded provider %v", ref)
r.setProvider(ref, provider)
return nil
2021-07-28 19:12:53 +00:00
}
Reuse provider instances where possible (#14127) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes https://github.com/pulumi/pulumi/issues/13987. This reworks the registry to better track provider instances such that we can reuse unconfigured instances between Creates, Updates, and Sames. When we allocate a provider instance in the registry for a Check call we save it with the special id "unconfigured". This value should never make its way back to program SDKs, it's purely an internal value for the engine. When we do a Create, Update or Same we look to see if there's an unconfigured provider to use and if so configures that one, else it starts up a fresh one. (N.B. Update we can assume there will always be an unconfigured one from the Check call before). This has also fixed registry Create to use the ID `UnknownID` rather than `""`, have added some contract assertions to check that and fixed up some test fallout because of that (the tests had been getting away with leaving ID blank before). ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-10-12 20:46:01 +00:00
// Create configures the provider with the given URN using the indicated configuration, assigns it an ID, and
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
// registers it under the assigned (URN, ID).
//
// The provider must have been loaded by a prior call to Check.
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
func (r *Registry) Create(ctx context.Context, req plugin.CreateRequest) (plugin.CreateResponse, error) {
label := fmt.Sprintf("%s.Create(%s)", r.label(), req.URN)
logging.V(7).Infof("%s executing (#news=%v)", label, len(req.Properties))
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
Reuse provider instances where possible (#14127) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes https://github.com/pulumi/pulumi/issues/13987. This reworks the registry to better track provider instances such that we can reuse unconfigured instances between Creates, Updates, and Sames. When we allocate a provider instance in the registry for a Check call we save it with the special id "unconfigured". This value should never make its way back to program SDKs, it's purely an internal value for the engine. When we do a Create, Update or Same we look to see if there's an unconfigured provider to use and if so configures that one, else it starts up a fresh one. (N.B. Update we can assume there will always be an unconfigured one from the Check call before). This has also fixed registry Create to use the ID `UnknownID` rather than `""`, have added some contract assertions to check that and fixed up some test fallout because of that (the tests had been getting away with leaving ID blank before). ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-10-12 20:46:01 +00:00
// Fetch the unconfigured provider, configure it, and register it under a new ID. We remove the
// unconfigured ID from the provider map so nothing else tries to use and re-configure this instance.
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
provider, ok := r.deleteProvider(mustNewReference(req.URN, UnconfiguredID))
Reuse provider instances where possible (#14127) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes https://github.com/pulumi/pulumi/issues/13987. This reworks the registry to better track provider instances such that we can reuse unconfigured instances between Creates, Updates, and Sames. When we allocate a provider instance in the registry for a Check call we save it with the special id "unconfigured". This value should never make its way back to program SDKs, it's purely an internal value for the engine. When we do a Create, Update or Same we look to see if there's an unconfigured provider to use and if so configures that one, else it starts up a fresh one. (N.B. Update we can assume there will always be an unconfigured one from the Check call before). This has also fixed registry Create to use the ID `UnknownID` rather than `""`, have added some contract assertions to check that and fixed up some test fallout because of that (the tests had been getting away with leaving ID blank before). ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-10-12 20:46:01 +00:00
if !ok {
// The unconfigured provider may have been Same'd after Check and this provider could be a replacement create.
// In which case we need to start up a fresh copy.
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
providerPkg := GetProviderPackage(req.URN.Type())
Reuse provider instances where possible (#14127) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes https://github.com/pulumi/pulumi/issues/13987. This reworks the registry to better track provider instances such that we can reuse unconfigured instances between Creates, Updates, and Sames. When we allocate a provider instance in the registry for a Check call we save it with the special id "unconfigured". This value should never make its way back to program SDKs, it's purely an internal value for the engine. When we do a Create, Update or Same we look to see if there's an unconfigured provider to use and if so configures that one, else it starts up a fresh one. (N.B. Update we can assume there will always be an unconfigured one from the Check call before). This has also fixed registry Create to use the ID `UnknownID` rather than `""`, have added some contract assertions to check that and fixed up some test fallout because of that (the tests had been getting away with leaving ID blank before). ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-10-12 20:46:01 +00:00
// Parse the provider version, then load, configure, and register the provider.
name, err := GetProviderName(providerPkg, req.Properties)
if err != nil {
return plugin.CreateResponse{Status: resource.StatusUnknown},
fmt.Errorf("parse name for %v provider '%v': %w", providerPkg, req.URN, err)
}
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
version, err := GetProviderVersion(req.Properties)
Reuse provider instances where possible (#14127) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes https://github.com/pulumi/pulumi/issues/13987. This reworks the registry to better track provider instances such that we can reuse unconfigured instances between Creates, Updates, and Sames. When we allocate a provider instance in the registry for a Check call we save it with the special id "unconfigured". This value should never make its way back to program SDKs, it's purely an internal value for the engine. When we do a Create, Update or Same we look to see if there's an unconfigured provider to use and if so configures that one, else it starts up a fresh one. (N.B. Update we can assume there will always be an unconfigured one from the Check call before). This has also fixed registry Create to use the ID `UnknownID` rather than `""`, have added some contract assertions to check that and fixed up some test fallout because of that (the tests had been getting away with leaving ID blank before). ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-10-12 20:46:01 +00:00
if err != nil {
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
return plugin.CreateResponse{Status: resource.StatusUnknown},
fmt.Errorf("parse version for %v provider '%v': %w", providerPkg, req.URN, err)
Reuse provider instances where possible (#14127) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes https://github.com/pulumi/pulumi/issues/13987. This reworks the registry to better track provider instances such that we can reuse unconfigured instances between Creates, Updates, and Sames. When we allocate a provider instance in the registry for a Check call we save it with the special id "unconfigured". This value should never make its way back to program SDKs, it's purely an internal value for the engine. When we do a Create, Update or Same we look to see if there's an unconfigured provider to use and if so configures that one, else it starts up a fresh one. (N.B. Update we can assume there will always be an unconfigured one from the Check call before). This has also fixed registry Create to use the ID `UnknownID` rather than `""`, have added some contract assertions to check that and fixed up some test fallout because of that (the tests had been getting away with leaving ID blank before). ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-10-12 20:46:01 +00:00
}
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
downloadURL, err := GetProviderDownloadURL(req.Properties)
Reuse provider instances where possible (#14127) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes https://github.com/pulumi/pulumi/issues/13987. This reworks the registry to better track provider instances such that we can reuse unconfigured instances between Creates, Updates, and Sames. When we allocate a provider instance in the registry for a Check call we save it with the special id "unconfigured". This value should never make its way back to program SDKs, it's purely an internal value for the engine. When we do a Create, Update or Same we look to see if there's an unconfigured provider to use and if so configures that one, else it starts up a fresh one. (N.B. Update we can assume there will always be an unconfigured one from the Check call before). This has also fixed registry Create to use the ID `UnknownID` rather than `""`, have added some contract assertions to check that and fixed up some test fallout because of that (the tests had been getting away with leaving ID blank before). ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-10-12 20:46:01 +00:00
if err != nil {
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
return plugin.CreateResponse{Status: resource.StatusUnknown},
fmt.Errorf("parse download URL for %v provider '%v': %w", providerPkg, req.URN, err)
Reuse provider instances where possible (#14127) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes https://github.com/pulumi/pulumi/issues/13987. This reworks the registry to better track provider instances such that we can reuse unconfigured instances between Creates, Updates, and Sames. When we allocate a provider instance in the registry for a Check call we save it with the special id "unconfigured". This value should never make its way back to program SDKs, it's purely an internal value for the engine. When we do a Create, Update or Same we look to see if there's an unconfigured provider to use and if so configures that one, else it starts up a fresh one. (N.B. Update we can assume there will always be an unconfigured one from the Check call before). This has also fixed registry Create to use the ID `UnknownID` rather than `""`, have added some contract assertions to check that and fixed up some test fallout because of that (the tests had been getting away with leaving ID blank before). ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-10-12 20:46:01 +00:00
}
parameter, err := GetProviderParameterization(providerPkg, req.Properties)
Initial work for parameterized providers (#16281) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> This is the first part of paramaterized providers in the engine. This only supports "replacement" packages, that is where we fully replace a providers package with a new package (think how dynamic tfbridge will work, vs how crd2pulumi will work). I've made the decision to _not_ support using parameterised providers by sending the parameter in the RegisterResource request. This will necessitate some different work in how we send the parameter for explicit providers compared to version and pluginDownloadURL, but I think it's worth it going forward. No changelog as this is still basically unusable without codegen support done, and should still be considered primarily for internal experimental use for now. ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-10 17:28:47 +00:00
if err != nil {
return plugin.CreateResponse{Status: resource.StatusUnknown},
fmt.Errorf("parse parameter for %v provider '%v': %w", providerPkg, req.URN, err)
}
Reuse provider instances where possible (#14127) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes https://github.com/pulumi/pulumi/issues/13987. This reworks the registry to better track provider instances such that we can reuse unconfigured instances between Creates, Updates, and Sames. When we allocate a provider instance in the registry for a Check call we save it with the special id "unconfigured". This value should never make its way back to program SDKs, it's purely an internal value for the engine. When we do a Create, Update or Same we look to see if there's an unconfigured provider to use and if so configures that one, else it starts up a fresh one. (N.B. Update we can assume there will always be an unconfigured one from the Check call before). This has also fixed registry Create to use the ID `UnknownID` rather than `""`, have added some contract assertions to check that and fixed up some test fallout because of that (the tests had been getting away with leaving ID blank before). ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-10-12 20:46:01 +00:00
// TODO: We should thread checksums through here.
provider, err = loadParameterizedProvider(name, version, downloadURL, nil, parameter, r.host, r.builtins)
Reuse provider instances where possible (#14127) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes https://github.com/pulumi/pulumi/issues/13987. This reworks the registry to better track provider instances such that we can reuse unconfigured instances between Creates, Updates, and Sames. When we allocate a provider instance in the registry for a Check call we save it with the special id "unconfigured". This value should never make its way back to program SDKs, it's purely an internal value for the engine. When we do a Create, Update or Same we look to see if there's an unconfigured provider to use and if so configures that one, else it starts up a fresh one. (N.B. Update we can assume there will always be an unconfigured one from the Check call before). This has also fixed registry Create to use the ID `UnknownID` rather than `""`, have added some contract assertions to check that and fixed up some test fallout because of that (the tests had been getting away with leaving ID blank before). ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-10-12 20:46:01 +00:00
if err != nil {
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
return plugin.CreateResponse{Status: resource.StatusUnknown},
fmt.Errorf("load plugin for %v provider '%v': %w", providerPkg, req.URN, err)
Reuse provider instances where possible (#14127) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes https://github.com/pulumi/pulumi/issues/13987. This reworks the registry to better track provider instances such that we can reuse unconfigured instances between Creates, Updates, and Sames. When we allocate a provider instance in the registry for a Check call we save it with the special id "unconfigured". This value should never make its way back to program SDKs, it's purely an internal value for the engine. When we do a Create, Update or Same we look to see if there's an unconfigured provider to use and if so configures that one, else it starts up a fresh one. (N.B. Update we can assume there will always be an unconfigured one from the Check call before). This has also fixed registry Create to use the ID `UnknownID` rather than `""`, have added some contract assertions to check that and fixed up some test fallout because of that (the tests had been getting away with leaving ID blank before). ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-10-12 20:46:01 +00:00
}
if provider == nil {
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
return plugin.CreateResponse{Status: resource.StatusUnknown},
fmt.Errorf("find plugin for %v provider '%v' at version %v", providerPkg, req.URN, version)
Reuse provider instances where possible (#14127) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes https://github.com/pulumi/pulumi/issues/13987. This reworks the registry to better track provider instances such that we can reuse unconfigured instances between Creates, Updates, and Sames. When we allocate a provider instance in the registry for a Check call we save it with the special id "unconfigured". This value should never make its way back to program SDKs, it's purely an internal value for the engine. When we do a Create, Update or Same we look to see if there's an unconfigured provider to use and if so configures that one, else it starts up a fresh one. (N.B. Update we can assume there will always be an unconfigured one from the Check call before). This has also fixed registry Create to use the ID `UnknownID` rather than `""`, have added some contract assertions to check that and fixed up some test fallout because of that (the tests had been getting away with leaving ID blank before). ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-10-12 20:46:01 +00:00
}
}
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
if _, err := provider.Configure(context.Background(), plugin.ConfigureRequest{
Inputs: req.Properties,
}); err != nil {
return plugin.CreateResponse{Status: resource.StatusOK}, err
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
}
Reuse provider instances where possible (#14127) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes https://github.com/pulumi/pulumi/issues/13987. This reworks the registry to better track provider instances such that we can reuse unconfigured instances between Creates, Updates, and Sames. When we allocate a provider instance in the registry for a Check call we save it with the special id "unconfigured". This value should never make its way back to program SDKs, it's purely an internal value for the engine. When we do a Create, Update or Same we look to see if there's an unconfigured provider to use and if so configures that one, else it starts up a fresh one. (N.B. Update we can assume there will always be an unconfigured one from the Check call before). This has also fixed registry Create to use the ID `UnknownID` rather than `""`, have added some contract assertions to check that and fixed up some test fallout because of that (the tests had been getting away with leaving ID blank before). ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-10-12 20:46:01 +00:00
id := resource.ID(UnknownID)
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
if !req.Preview {
// generate a new uuid
uuid, err := uuid.NewV4()
if err != nil {
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
return plugin.CreateResponse{Status: resource.StatusOK}, err
}
id = resource.ID(uuid.String())
contract.Assertf(id != UnknownID, "resource ID must not be unknown")
}
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
r.setProvider(mustNewReference(req.URN, id), provider)
return plugin.CreateResponse{
ID: id,
Properties: req.Properties,
Status: resource.StatusOK,
}, nil
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
}
// Update configures the provider with the given URN and ID using the indicated configuration and registers it at the
// reference indicated by the (URN, ID) pair.
//
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
// The provider must have been loaded by a prior call to Check.
func (r *Registry) Update(ctx context.Context, req plugin.UpdateRequest) (plugin.UpdateResponse, error) {
label := fmt.Sprintf("%s.Update(%s,%s)", r.label(), req.ID, req.URN)
logging.V(7).Infof("%s: executing (#oldInputs=%d#oldOutputs=%d,#newInputs=%d)",
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
label, len(req.OldInputs), len(req.OldOutputs), len(req.NewInputs))
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
Reuse provider instances where possible (#14127) <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes https://github.com/pulumi/pulumi/issues/13987. This reworks the registry to better track provider instances such that we can reuse unconfigured instances between Creates, Updates, and Sames. When we allocate a provider instance in the registry for a Check call we save it with the special id "unconfigured". This value should never make its way back to program SDKs, it's purely an internal value for the engine. When we do a Create, Update or Same we look to see if there's an unconfigured provider to use and if so configures that one, else it starts up a fresh one. (N.B. Update we can assume there will always be an unconfigured one from the Check call before). This has also fixed registry Create to use the ID `UnknownID` rather than `""`, have added some contract assertions to check that and fixed up some test fallout because of that (the tests had been getting away with leaving ID blank before). ## Checklist - [x] I have run `make tidy` to update any new dependencies - [x] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [x] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2023-10-12 20:46:01 +00:00
// Fetch the unconfigured provider, configure it, and register it under a new ID. We remove the
// unconfigured ID from the provider map so nothing else tries to use and re-configure this instance.
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
provider, ok := r.deleteProvider(mustNewReference(req.URN, UnconfiguredID))
contract.Assertf(ok, "'Check' and 'Diff' must be called before 'Update' (%v)", req.URN)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
if _, err := provider.Configure(ctx, plugin.ConfigureRequest{Inputs: req.NewInputs}); err != nil {
return plugin.UpdateResponse{Status: resource.StatusUnknown}, err
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
}
// Publish the configured provider.
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
r.setProvider(mustNewReference(req.URN, req.ID), provider)
return plugin.UpdateResponse{Properties: req.NewInputs, Status: resource.StatusOK}, nil
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
}
Don't load providers at startup This changes the provider registry to no longer load all the providers from the old state on startup (in `NewRegistry`) instead the load logic has been moved to the `Same` method. The step_executor and step_generator have been fixed up to ensure that for cases where a resource might not have had it's provider created yet (i.e. for DBR'ing the old version of a resource, for refreshes or deletes) they ask the `Deployment` to look up the provider in the old state and `Same` it in the registry. All of the above means we only load providers we're going to use (even taking --targets into account). One fix mot done in this change is to auto-update providers for deletes. That is given a program state with two resources both using V1 of a provider, if you run the program to update one of those resource to use V2 of the provider but to delete the other resource currently we'll still load V1 to do that delete. It _might_ be possible (although this is definitly questionable) to see that another resource changed it's provider from V1 to V2 and to just assume the same change should have happened to the deleted resource. This could be helpful for not loading old provider versions at all, but can be done in two passes now pretty easily. Just run `up` without any program changes except for the SDK version bump to update all the provider references to V2 of the provider, then do another `up` that deletes the second resource. Fixes https://github.com/pulumi/pulumi/issues/12177.
2023-04-12 09:35:20 +00:00
// Delete unregisters and unloads the provider with the given URN and ID. If the provider was never loaded
// this is a no-op.
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
func (r *Registry) Delete(_ context.Context, req plugin.DeleteRequest) (plugin.DeleteResponse, error) {
contract.Assertf(!r.isPreview, "Delete must not be called during preview")
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
ref := mustNewReference(req.URN, req.ID)
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
provider, has := r.deleteProvider(ref)
Don't load providers at startup This changes the provider registry to no longer load all the providers from the old state on startup (in `NewRegistry`) instead the load logic has been moved to the `Same` method. The step_executor and step_generator have been fixed up to ensure that for cases where a resource might not have had it's provider created yet (i.e. for DBR'ing the old version of a resource, for refreshes or deletes) they ask the `Deployment` to look up the provider in the old state and `Same` it in the registry. All of the above means we only load providers we're going to use (even taking --targets into account). One fix mot done in this change is to auto-update providers for deletes. That is given a program state with two resources both using V1 of a provider, if you run the program to update one of those resource to use V2 of the provider but to delete the other resource currently we'll still load V1 to do that delete. It _might_ be possible (although this is definitly questionable) to see that another resource changed it's provider from V1 to V2 and to just assume the same change should have happened to the deleted resource. This could be helpful for not loading old provider versions at all, but can be done in two passes now pretty easily. Just run `up` without any program changes except for the SDK version bump to update all the provider references to V2 of the provider, then do another `up` that deletes the second resource. Fixes https://github.com/pulumi/pulumi/issues/12177.
2023-04-12 09:35:20 +00:00
if !has {
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
return plugin.DeleteResponse{}, nil
Don't load providers at startup This changes the provider registry to no longer load all the providers from the old state on startup (in `NewRegistry`) instead the load logic has been moved to the `Same` method. The step_executor and step_generator have been fixed up to ensure that for cases where a resource might not have had it's provider created yet (i.e. for DBR'ing the old version of a resource, for refreshes or deletes) they ask the `Deployment` to look up the provider in the old state and `Same` it in the registry. All of the above means we only load providers we're going to use (even taking --targets into account). One fix mot done in this change is to auto-update providers for deletes. That is given a program state with two resources both using V1 of a provider, if you run the program to update one of those resource to use V2 of the provider but to delete the other resource currently we'll still load V1 to do that delete. It _might_ be possible (although this is definitly questionable) to see that another resource changed it's provider from V1 to V2 and to just assume the same change should have happened to the deleted resource. This could be helpful for not loading old provider versions at all, but can be done in two passes now pretty easily. Just run `up` without any program changes except for the SDK version bump to update all the provider references to V2 of the provider, then do another `up` that deletes the second resource. Fixes https://github.com/pulumi/pulumi/issues/12177.
2023-04-12 09:35:20 +00:00
}
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
closeErr := r.host.CloseProvider(provider)
contract.IgnoreError(closeErr)
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
return plugin.DeleteResponse{}, nil
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
}
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
func (r *Registry) Read(context.Context, plugin.ReadRequest) (plugin.ReadResponse, error) {
return plugin.ReadResponse{}, errors.New("provider resources may not be read")
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
}
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
func (r *Registry) Construct(context.Context, plugin.ConstructRequest) (plugin.ConstructResponse, error) {
Initial support for remote component construction. (#5280) These changes add initial support for the construction of remote components. For now, this support is limited to the NodeJS SDK; follow-up changes will implement support for the other SDKs. Remote components are component resources that are constructed and managed by plugins rather than by Pulumi programs. In this sense, they are a bit like cloud resources, and are supported by the same distribution and plugin loading mechanisms and described by the same schema system. The construction of a remote component is initiated by a `RegisterResourceRequest` with the new `remote` field set to `true`. When the resource monitor receives such a request, it loads the plugin that implements the component resource and calls the `Construct` method added to the resource provider interface as part of these changes. This method accepts the information necessary to construct the component and its children: the component's name, type, resource options, inputs, and input dependencies. It is responsible for dispatching to the appropriate component factory to create the component, then returning its URN, resolved output properties, and output property dependencies. The dependency information is necessary to support features such as delete-before-replace, which rely on precise dependency information for custom resources. These changes also add initial support for more conveniently implementing resource providers in NodeJS. The interface used to implement such a provider is similar to the dynamic provider interface (and may be unified with that interface in the future). An example of a NodeJS program constructing a remote component resource also implemented in NodeJS can be found in `tests/construct_component/nodejs`. This is the core of #2430.
2020-09-08 02:33:55 +00:00
return plugin.ConstructResult{}, errors.New("provider resources may not be constructed")
}
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
func (r *Registry) Invoke(context.Context, plugin.InvokeRequest) (plugin.InvokeResponse, error) {
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
// It is the responsibility of the eval source to ensure that we never attempt an invoke using the provider
// registry.
contract.Failf("Invoke must not be called on the provider registry")
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
return plugin.InvokeResponse{}, errors.New("the provider registry is not invokable")
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
}
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
func (r *Registry) StreamInvoke(context.Context, plugin.StreamInvokeRequest) (plugin.StreamInvokeResponse, error) {
return plugin.StreamInvokeResponse{}, errors.New("the provider registry does not implement streaming invokes")
2019-10-22 07:20:26 +00:00
}
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
func (r *Registry) Call(context.Context, plugin.CallRequest) (plugin.CallResponse, error) {
// It is the responsibility of the eval source to ensure that we never attempt an call using the provider
// registry.
contract.Failf("Call must not be called on the provider registry")
return plugin.CallResult{}, errors.New("the provider registry is not callable")
}
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
func (r *Registry) GetPluginInfo(context.Context) (workspace.PluginInfo, error) {
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
// return an error: this should not be called for the provider registry
return workspace.PluginInfo{}, errors.New("the provider registry does not report plugin info")
}
Normalize plugin.Provider methods to (Context, Request) -> (Response, error) (#16302) Normalize methods on plugin.Provider to the form: ```go Method(context.Context, MethodRequest) (MethodResponse, error) ``` This provides a more consistent and forwards compatible interface for each of our methods. --- I'm motivated to work on this because the bridge maintains a copy of this interface: `ProviderWithContext`. This doubles the pain of dealing with any breaking change and this PR would allow me to remove the extra interface. I'm willing to fix consumers of `plugin.Provider` in `pulumi/pulumi`, but I wanted to make sure that we would be willing to merge this PR if I get it green. <!--- Thanks so much for your contribution! If this is your first time contributing, please ensure that you have read the [CONTRIBUTING](https://github.com/pulumi/pulumi/blob/master/CONTRIBUTING.md) documentation. --> # Description <!--- Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. --> Fixes # (issue) ## Checklist - [ ] I have run `make tidy` to update any new dependencies - [ ] I have run `make lint` to verify my code passes the lint check - [ ] I have formatted my code using `gofumpt` <!--- Please provide details if the checkbox below is to be left unchecked. --> - [ ] I have added tests that prove my fix is effective or that my feature works <!--- User-facing changes require a CHANGELOG entry. --> - [ ] I have run `make changelog` and committed the `changelog/pending/<file>` documenting my change <!-- If the change(s) in this PR is a modification of an existing call to the Pulumi Cloud, then the service should honor older versions of the CLI where this change would not exist. You must then bump the API version in /pkg/backend/httpstate/client/api.go, as well as add it to the service. --> - [ ] Yes, there are changes in this PR that warrants bumping the Pulumi Cloud API version <!-- @Pulumi employees: If yes, you must submit corresponding changes in the service repo. -->
2024-06-07 19:47:49 +00:00
func (r *Registry) SignalCancellation(context.Context) error {
Implement first-class providers. (#1695) ### First-Class Providers These changes implement support for first-class providers. First-class providers are provider plugins that are exposed as resources via the Pulumi programming model so that they may be explicitly and multiply instantiated. Each instance of a provider resource may be configured differently, and configuration parameters may be source from the outputs of other resources. ### Provider Plugin Changes In order to accommodate the need to verify and diff provider configuration and configure providers without complete configuration information, these changes adjust the high-level provider plugin interface. Two new methods for validating a provider's configuration and diffing changes to the same have been added (`CheckConfig` and `DiffConfig`, respectively), and the type of the configuration bag accepted by `Configure` has been changed to a `PropertyMap`. These changes have not yet been reflected in the provider plugin gRPC interface. We will do this in a set of follow-up changes. Until then, these methods are implemented by adapters: - `CheckConfig` validates that all configuration parameters are string or unknown properties. This is necessary because existing plugins only accept string-typed configuration values. - `DiffConfig` either returns "never replace" if all configuration values are known or "must replace" if any configuration value is unknown. The justification for this behavior is given [here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106) - `Configure` converts the config bag to a legacy config map and configures the provider plugin if all config values are known. If any config value is unknown, the underlying plugin is not configured and the provider may only perform `Check`, `Read`, and `Invoke`, all of which return empty results. We justify this behavior becuase it is only possible during a preview and provides the best experience we can manage with the existing gRPC interface. ### Resource Model Changes Providers are now exposed as resources that participate in a stack's dependency graph. Like other resources, they are explicitly created, may have multiple instances, and may have dependencies on other resources. Providers are referred to using provider references, which are a combination of the provider's URN and its ID. This design addresses the need during a preview to refer to providers that have not yet been physically created and therefore have no ID. All custom resources that are not themselves providers must specify a single provider via a provider reference. The named provider will be used to manage that resource's CRUD operations. If a resource's provider reference changes, the resource must be replaced. Though its URN is not present in the resource's dependency list, the provider should be treated as a dependency of the resource when topologically sorting the dependency graph. Finally, `Invoke` operations must now specify a provider to use for the invocation via a provider reference. ### Engine Changes First-class providers support requires a few changes to the engine: - The engine must have some way to map from provider references to provider plugins. It must be possible to add providers from a stack's checkpoint to this map and to register new/updated providers during the execution of a plan in response to CRUD operations on provider resources. - In order to support updating existing stacks using existing Pulumi programs that may not explicitly instantiate providers, the engine must be able to manage the "default" providers for each package referenced by a checkpoint or Pulumi program. The configuration for a "default" provider is taken from the stack's configuration data. The former need is addressed by adding a provider registry type that is responsible for managing all of the plugins required by a plan. In addition to loading plugins froma checkpoint and providing the ability to map from a provider reference to a provider plugin, this type serves as the provider plugin for providers themselves (i.e. it is the "provider provider"). The latter need is solved via two relatively self-contained changes to plan setup and the eval source. During plan setup, the old checkpoint is scanned for custom resources that do not have a provider reference in order to compute the set of packages that require a default provider. Once this set has been computed, the required default provider definitions are conjured and prepended to the checkpoint's resource list. Each resource that requires a default provider is then updated to refer to the default provider for its package. While an eval source is running, each custom resource registration, resource read, and invoke that does not name a provider is trapped before being returned by the source iterator. If no default provider for the appropriate package has been registered, the eval source synthesizes an appropriate registration, waits for it to complete, and records the registered provider's reference. This reference is injected into the original request, which is then processed as usual. If a default provider was already registered, the recorded reference is used and no new registration occurs. ### SDK Changes These changes only expose first-class providers from the Node.JS SDK. - A new abstract class, `ProviderResource`, can be subclassed and used to instantiate first-class providers. - A new field in `ResourceOptions`, `provider`, can be used to supply a particular provider instance to manage a `CustomResource`'s CRUD operations. - A new type, `InvokeOptions`, can be used to specify options that control the behavior of a call to `pulumi.runtime.invoke`. This type includes a `provider` field that is analogous to `ResourceOptions.provider`.
2018-08-07 00:50:29 +00:00
// At the moment there isn't anything reasonable we can do here. In the future, it might be nice to plumb
// cancellation through the plugin loader and cancel any outstanding load requests here.
return nil
}