Now that the "config" member of Pulumi.yaml has been deprecated for a
while, we'll change it's meaning. When set, the value is treated as a
path and joined with the path to Pulumi.yaml, and per stack
configuration is stored in that folder
Fixes#1031
Long term, a stack name alone will not be sufficent to address a
stack. Introduce a new `backend.StackReference` interface that allows
each backend to give an opaque stack reference that can be used across
operations.
This change removes the need to `pulumi init` when targeting the local
backend. A fair amount of the change lays the foundation that the next
set of changes to stop having `pulumi init` be used for cloud stacks
as well.
Previously, `pulumi init` logically did two things:
1. It created the bookkeeping directory for local stacks, this was
stored in `<repository-root>/.pulumi`, where `<repository-root>` was
the path to what we belived the "root" of your project was. In the
case of git repositories, this was the directory that contained your
`.git` folder.
2. It recorded repository information in
`<repository-root>/.pulumi/repository.json`. This was used by the
cloud backend when computing what project to interact with on
Pulumi.com
The new identity model will remove the need for (2), since we only
need an owner and stack name to fully qualify a stack on
pulumi.com, so it's easy enough to stop creating a folder just for
that.
However, for the local backend, we need to continue to retain some
information about stacks (e.g. checkpoints, history, etc). In
addition, we need to store our workspace settings (which today just
contains the selected stack) somehere.
For state stored by the local backend, we change the URL scheme from
`local://` to `local://<optional-root-path>`. When
`<optional-root-path>` is unset, it defaults to `$HOME`. We create our
`.pulumi` folder in that directory. This is important because stack
names now must be unique within the backend, but we have some tests
using local stacks which use fixed stack names, so each integration
test really wants its own "view" of the world.
For the workspace settings, we introduce a new `workspaces` directory
in `~/.pulumi`. In this folder we write the workspace settings file
for each project. The file name is the name of the project, combined
with the SHA1 of the path of the project file on disk, to ensure that
multiple pulumi programs with the same project name have different
workspace settings.
This does mean that moving a project's location on disk will cause the
CLI to "forget" what the selected stack was, which is unfortunate, but
not the end of the world. If this ends up being a big pain point, we
can certianly try to play games in the future (for example, if we saw
a .git folder in a parent folder, we could store data in there).
With respect to compatibility, we don't attempt to migrate older files
to their newer locations. For long lived stacks managed using the
local backend, we can provide information on where to move things
to. For all stacks (regardless of backend) we'll require the user to
`pulumi stack select` their stack again, but that seems like the
correct trade-off vs writing complicated upgrade code.
We are going to be changing the configuration model. To begin, let's
take most of the existing stuff and mark it as "deprecated" so we can
keep the existing behavior (to help transition newer code forward)
while making it clear what APIs should not be called in the
implementation of `pulumi` itself.
This improves the overall cloud CLI experience workflow.
Now whether a stack is local or cloud is inherent to the stack
itself. If you interact with a cloud stack, we transparently talk
to the cloud; if you interact with a local stack, we just do the
right thing, and perform all operations locally. Aside from sometimes
seeing a cloud emoji pop-up ☁️, the experience is quite similar.
For example, to initialize a new cloud stack, simply:
$ pulumi login
Logging into Pulumi Cloud: https://pulumi.com/
Enter Pulumi access token: <enter your token>
$ pulumi stack init my-cloud-stack
Note that you may log into a specific cloud if you'd like. For
now, this is just for our own testing purposes, but someday when we
support custom clouds (e.g., Enterprise), you can just say:
$ pulumi login --cloud-url https://corp.acme.my-ppc.net:9873
The cloud is now the default. If you instead prefer a "fire and
forget" style of stack, you can skip the login and pass `--local`:
$ pulumi stack init my-faf-stack --local
If you are logged in and run `pulumi`, we tell you as much:
$ pulumi
Usage:
pulumi [command]
// as before...
Currently logged into the Pulumi Cloud ☁️https://pulumi.com/
And if you list your stacks, we tell you which one is local or not:
$ pulumi stack ls
NAME LAST UPDATE RESOURCE COUNT CLOUD URL
my-cloud-stack 2017-12-01 ... 3 https://pulumi.com/
my-faf-stack n/a 0 n/a
And `pulumi stack` by itself prints information like your cloud org,
PPC name, and so on, in addition to the usuals.
I shall write up more details and make sure to document these changes.
This change also fairly significantly refactors the layout of cloud
versus local logic, so that the cmd/ package is resonsible for CLI
things, and the new pkg/backend/ package is responsible for the
backends. The following is the overall resulting package architecture:
* The backend.Backend interface can be implemented to substitute
a new backend. This has operations to get and list stacks,
perform updates, and so on.
* The backend.Stack struct is a wrapper around a stack that has
or is being manipulated by a Backend. It resembles our existing
Stack notions in the engine, but carries additional metadata
about its source. Notably, it offers functions that allow
operations like updating and deleting on the Backend from which
it came.
* There is very little else in the pkg/backend/ package.
* A new package, pkg/backend/local/, encapsulates all local state
management for "fire and forget" scenarios. It simply implements
the above logic and contains anything specific to the local
experience.
* A peer package, pkg/backend/cloud/, encapsulates all logic
required for the cloud experience. This includes its subpackage
apitype/ which contains JSON schema descriptions required for
REST calls against the cloud backend. It also contains handy
functions to list which clouds we have authenticated with.
* A subpackage here, pkg/backend/state/, is not a provider at all.
Instead, it contains all of the state management functions that
are currently shared between local and cloud backends. This
includes configuration logic -- including encryption -- as well
as logic pertaining to which stacks are known to the workspace.
This addresses pulumi/pulumi#629 and pulumi/pulumi#494.
Previously, we stored configuration information in the Pulumi.yaml
file. This was a change from the old model where configuration was
stored in a special section of the checkpoint file.
While doing things this way has some upsides with being able to flow
configuration changes with your source code (e.g. fixed values for a
production stack that version with the code) it caused some friction
for the local development scinerio. In this case, setting
configuration values would pend changes to Pulumi.yaml and if you
didn't want to publish these changes, you'd have to remember to remove
them before commiting. It also was problematic for our examples, where
it was not clear if we wanted to actually include values like
`aws:config:region` in our samples. Finally, we found that for our
own pulumi service, we'd have values that would differ across each
individual dev stack, and publishing these values to a global
Pulumi.yaml file would just be adding noise to things.
We now adopt a hybrid model, where by default configuration is stored
locally, in the workspace's settings per project. A new flag `--save`
tests commands to actual operate on the configuration information
stored in Pulumi.yaml.
With the following change, we have have four "slots" configuration
values can end up in:
1. In the Pulumi.yaml file, applies to all stacks
2. In the Pulumi.yaml file, applied to a specific stack
3. In the local workspace.json file, applied to all stacks
4. In the local workspace.json file, applied to a specific stack
When computing the configuration information for a stack, we apply
configuration in the above order, overriding values as we go
along.
We also invert the default behavior of the `pulumi config` commands so
they operate on a specific stack (i.e. how they did before
e3610989). If you want to apply configuration to all stacks, `--all`
can be passed to any configuration command.
Instead of doing the logic to see if a type has YAML tags and then
dispatching based on that to use either the direct go-yaml marshaller
or the one that works in terms of JSON tags, let's just say that we
always add YAML tags as well, and use go-yaml directly.
Previously we used the word "Environment" as the term for a deployment
target, but since then we've started to use the term Stack. Adopt this
across the CLI.
From a user's point of view, there are a few changes:
1. The `env` verb has been renamed to `stack`
2. The `-e` and `--env` options to commands which operate on an
environment now take `-s` or `--stack` instead.
3. Becase of (2), the commands that used `-s` to display a summary now
only support passing the full option name (`--summary`).
On the local file system, we still store checkpoint data in the `env`
sub-folder under `.pulumi` (so we can reuse existing checkpoint files
that were written to the old folder)
This includes a few changes:
* The repo name -- and hence the Go modules -- changes from pulumi-fabric to pulumi.
* The Node.js SDK package changes from @pulumi/pulumi-fabric to just pulumi.
* The CLI is renamed from lumi to pulumi.
We are renaming Lumi to Pulumi Fabric. This change simply renames the
pulumi/lumi repo to pulumi/pulumi-fabric, without the CLI tools and other
changes that will follow soon afterwards.
This change eliminates the need to constantly type in the environment
name when performing major commands like configuration, planning, and
deployment. It's probably due to my age, however, I keep fat-fingering
simple commands in front of investors and I am embarrassed!
In the new model, there is a notion of a "current environment", and
I have modeled it kinda sorta just like Git's notion of "current branch."
By default, the current environment is set when you `init` something.
Otherwise, there is the `coco env select <env>` command to change it.
(Running this command w/out a new <env> will show you the current one.)
The major commands `config`, `plan`, `deploy`, and `destroy` will prefer
to use the current environment, unless it is overridden by using the
--env flag. All of the `coco env <cmd> <env>` commands still require the
explicit passing of an environment which seems reasonable since they are,
after all, about manipulating environments.
As part of this, I've overhauled the aging workspace settings cruft,
which had fallen into disrepair since the initial prototype.
I was sloppy in my use of names versus tokens in the original AST.
Now that we're actually binding things to concrete symbols, etc., we
need to be more precise. In particular, names are just identifiers
that must be "interpreted" in a given lexical context for them to
make any sense; whereas, tokens stand alone and can be resolved without
context other than the set of imported packages, modules, and overall
module structure. As such, names are much simpler than tokens.
As explained in the comments, tokens.Names are simple identifiers:
Name = [A-Za-z_][A-Za-z0-9_]*
and tokens.QNames are fully qualified identifiers delimited by "/":
QName = [ <Name> "/" ]* <Name>
The legal grammar for a token depends on the subset of symbols that
token is meant to represent. However, the most general case, that
accepts all specializations of tokens, is roughly as follows:
Token = <Name> |
<PackageName>
[ ":" <ModuleName>
[ "/" <ModuleMemberName>
[ "." <Class MemberName> ]
]
]
where:
PackageName = <QName>
ModuleName = <QName>
ModuleMemberName = <Name>
ClassMemberName = <Name>
Please refer to the comments in pkg/tokens/tokens.go for more details.
This change further merges the new AST and MuPack/MuIL formats and
abstractions into the core of the compiler. A good amount of the old
code is gone now; I decided against ripping it all out in one fell
swoop so that I can methodically check that we are preserving all
relevant decisions and/or functionality we had in the old model.
The changes are too numerous to outline in this commit message,
however, here are the noteworthy ones:
* Split up the notion of symbols and tokens, resulting in:
- pkg/symbols for true compiler symbols (bound nodes)
- pkg/tokens for name-based tokens, identifiers, constants
* Several packages move underneath pkg/compiler:
- pkg/ast becomes pkg/compiler/ast
- pkg/errors becomes pkg/compiler/errors
- pkg/symbols becomes pkg/compiler/symbols
* pkg/ast/... becomes pkg/compiler/legacy/ast/...
* pkg/pack/ast becomes pkg/compiler/ast.
* pkg/options goes away, merged back into pkg/compiler.
* All binding functionality moves underneath a dedicated
package, pkg/compiler/binder. The legacy.go file contains
cruft that will eventually go away, while the other files
represent a halfway point between new and old, but are
expected to stay roughly in the current shape.
* All parsing functionality is moved underneath a new
pkg/compiler/metadata namespace, and we adopt new terminology
"metadata reading" since real parsing happens in the MetaMu
compilers. Hence, Parser has become metadata.Reader.
* In general phases of the compiler no longer share access to
the actual compiler.Compiler object. Instead, shared state is
moved to the core.Context object underneath pkg/compiler/core.
* Dependency resolution during binding has been rewritten to
the new model, including stashing bound package symbols in the
context object, and detecting import cycles.
* Compiler construction does not take a workspace object. Instead,
creation of a workspace is entirely hidden inside of the compiler's
constructor logic.
* There are three Compile* functions on the Compiler interface, to
support different styles of invoking compilation: Compile() auto-
detects a Mu package, based on the workspace; CompilePath(string)
loads the target as a Mu package and compiles it, regardless of
the workspace settings; and, CompilePackage(*pack.Package) will
compile a pre-loaded package AST, again regardless of workspace.
* Delete the _fe, _sema, and parsetree phases. They are no longer
relevant and the functionality is largely subsumed by the above.
...and so very much more. I'm surprised I ever got this to compile again!